Shuttle system ascent aerodynamic and plume heating

The shuttle program provided a challenge to the aerothermodynamicist due to the complexity of the flow field around the vehicle during ascent, since the configuration causes multiple shock interactions between the elements. Wind tunnel tests provided data for the prediction of the ascent design heating environment which involves both plume and aerodynamic heating phenomena. The approach for the heating methodology based on ground test firings and the use of the wind tunnel data to formulate the math models is discussed

Thermoset-thermoplastic aromatic polyamide containing N-propargyl groups

The compounds of the class of aromatic polyamides useful as matrix resins in the manufacture of composites or laminate fabrication were developed. The process for preparing this thermoplastic-thermoset polyamide system involves incorporating a latent crosslinking moiety along the backbone of the polyamide to improve the temperature range of fabrication thereof wherein the resin softens at a relatively low temperature (approx. 154 C) and subsequently sets-up or undergoes crosslinking when subjected to higher temperature (approx. 280 C)

The effects of dust evolution on disks in the mid-IR

In this paper, we couple together the dust evolution code two-pop-py with the thermochemical disk modelling code ProDiMo. We create a series of thermochemical disk models that simulate the evolution of dust over time from 0.018 Myr to 10 Myr, including the radial drift, growth, and settling of dust grains. We examine the effects of this dust evolution on the mid-infrared gas emission, focussing on the mid-infrared spectral lines of C2H2, CO2, HCN, NH3, OH, and H2O that are readily observable with Spitzer and the upcoming E-ELT and JWST. The addition of dust evolution acts to increase line fluxes by reducing the population of small dust grains. We find that the spectral lines of all species except C2H2 respond strongly to dust evolution, with line fluxes increasing by more than an order of magnitude across the model series as the density of small dust grains decreases over time. The C2H2 line fluxes are extremely low due to a lack of abundance in the infrared line-emitting regions, despite C2H2 being commonly detected with Spitzer, suggesting that warm chemistry in the inner disk may need further investigation. Finally, we find that the CO2 flux densities increase more rapidly than the other species as the dust disk evolves. This suggests that the flux ratios of CO2 to other species may be lower in disks with less-evolved dust populations.Comment: 13 pages, 9 figures, accepted in A&

Development of a Radioimmunoassay for Pig Pancreatic Kallikrein

Peer Reviewe

Experimental study of laboratory-heated CM2 chondrites Mighei and Murchison

We conducted experimental heating of two CM2 chondrites, Murchison and Mighei, to study changes in their oxygen isotopic compositions and mineralogy and explore possible genetic relationships between MCCs and normal CMs

Potential Alteration of Analogue Regolith by X-Ray Computed Tomography

The Mars 2020 rover mission will collect and cache samples from the martian surface for possible retrieval and subsequent return to Earth. Mars Returned Samples may provide definitive information about the presence of organic compounds that could shed light on the existence of past or present life on Mars. Post-mission analyses will depend on the development of a set of reliable sample handling and analysis procedures that cover the full range of materials which may or may not contain evidence of past or present martian life [1]

Neutrino-induced deuteron disintegration experiment

Cross sections for the disintegration of the deuteron via neutral-current (NCD) and charged-current (CCD) interactions with reactor antineutrinos are measured to be 6.08 +/- 0.77 x 10^(-45) cm-sq and 9.83 +/- 2.04 x 10^(-45) cm-sq per neutrino, respectively, in excellent agreement with current calculations. Since the experimental NCD value depends upon the CCD value, if we use the theoretical value for the CCD reaction, we obtain the improved value of 5.98 +/- 0.54 x 10^(-45) for the NCD cross section. The neutral-current reaction allows a unique measurement of the isovector-axial vector coupling constant in the hadronic weak interaction (beta). In the standard model, this constant is predicted to be exactly 1, independent of the Weinberg angle. We measure a value of beta^2 = 1.01 +/- 0.16. Using the above improved value for the NCD cross section, beta^2 becomes 0.99 +/- 0.10.Comment: 22pages, 9 figure

Seasonal abundance of small cladocerans in Lake Mangakaware, Waikato, New Zealand

The seasonal changes in the dynamics and life histories of the Cladocera in Lake Mangakaware, North Island, New Zealand, were studied over 19 months by sampling at weekly or 2-weekly intervals. Lake Mangakaware is a 13.3 ha polymictic lake with high nutrient status, low Secchi disc transparencies, and an unstable thermal regime. The four planktonic cladoceran species (Bosmina longirostris, B. meridionalis, Ceriodaphnia pulchella, and C. dubia) exhibited disjunct population maxima. Only B. longirostris was perennially present. All species exhibited low fecundities and low lipid content, indicating that food resources were limited and that competitive interactions and resistance to starvation were probably important in determining species success. Increases in body size in cooler seasons were unrelated to clutch size, giving further support for the view that available food was limited. These results are consistent with previous experimental findings that subtle differences in life history can determine seasonal success and the outcome of competition between similar species

Contact and Friction of Nano-Asperities: Effects of Adsorbed Monolayers

Molecular dynamics simulations are used to study contact between a rigid, nonadhesive, spherical tip with radius of order 30nm and a flat elastic substrate covered with a fluid monolayer of adsorbed chain molecules. Previous studies of bare surfaces showed that the atomic scale deviations from a sphere that are present on any tip constructed from discrete atoms lead to significant deviations from continuum theory and dramatic variability in friction forces. Introducing an adsorbed monolayer leads to larger deviations from continuum theory, but decreases the variations between tips with different atomic structure. Although the film is fluid, it remains in the contact and behaves qualitatively like a thin elastic coating except for certain tips at high loads. Measures of the contact area based on the moments or outer limits of the pressure distribution and on counting contacting atoms are compared. The number of tip atoms making contact in a time interval grows as a power of the interval when the film is present and logarithmically with the interval for bare surfaces. Friction is measured by displacing the tip at a constant velocity or pulling the tip with a spring. Both static and kinetic friction rise linearly with load at small loads. Transitions in the state of the film lead to nonlinear behavior at large loads. The friction is less clearly correlated with contact area than load.Comment: RevTex4, 17 pages, 13 figure