22,846 research outputs found
Natural environment design criteria for the Advanced X-ray Astrophysics Facility (AXAF) definition and preliminary design
This document provides the natural environment design criteria requirements for use in the Advanced X-Ray Astrophysics Facility (AXAF) definition and preliminary design studies. The atmospheric dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, and physical constants are all addressed. This information will enable all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements
Deflections of beam columns on multiple supports
Lateral deflections of beam columns on multiple equally spaced supports are calculated using the STAGS nonlinear structural analysis computer program. Three lateral loadings are considered, uniform, linear, and uniform over only the center bay. Two types of boundary conditions are considered at the end supports, clamped, and simple support. The effect of an initial sinusoidal imperfection are considered. Deflections in the center and end bays of the beam columns are presented as a function of applied axial compressive load. As the number of bays becomes large, the effect of boundary conditions on the deflections in the center bays diminishes. For cases involving a uniform or linearly varying load, imperfections can have a much larger effect on deflections in the center bays than can lateral pressure
Current research on shear buckling and thermal loads with PASCO: Panel Analysis and Sizing Code
The PASCO computer program to obtain the detailed dimensions of optimum stiffened composite structural panels is described. Design requirements in terms of inequality constraints can be placed on buckling loads or vibration frequencies, lamina stresses and strains, and overall panel stiffness for each of many load conditions. General panel cross sections can be treated. An analysis procedure involving a smeared orthotropic solution was investigated. The conservatism in the VIPASA solution and the danger in a smeared orthotropic solution is explored. PASCO's capability to design for thermal loadings is also described. It is emphasized that design studies illustrate the importance of the multiple load condition capability when thermal loads are present
Buckling loads for stiffened panels subjected to combined longitudinal compression and shear loadings: Results obtained with PASCO, EAL, and STAGS computer
The shear buckling analyses used in PASCO are summarized. The PASCO analyses include the basic VIPASA analysis, which is essentially exact for longitudinal and transverse loads, and a smeared orthotropic solution which was added to alleviate a shortcoming in the VIPASA analysis. Buckling results are presented for six stiffened panels loaded by combinations of longitudinal compression and shear. The buckling results were obtained with the PASCO, EAL, and STAGS computer programs. The EAL and STAGS solutions were obtained with a fine finite element mesh and provide calculations for the entire range of combinations of longitudinal compression and shear loadings
Buckling loads of stiffened panels subjected to combined longitudinal compression and shear: Results obtained with PASCO, EAL, and STAGS computer programs
Buckling analyses used in PASCO are summarized with emphasis placed on the shear buckling analyses. The PASCO buckling analyses include the basic VIPASA analysis, which is essentially exact for longitudinal and transverse loads, and a smeared stiffener solution, which treats a stiffened panel as an orthotropic plate. Buckling results are then presented for seven stiffened panels loaded by combinations of longitudinal compression and shear. The buckling results were obtained with the PASCO, EAL, and STAGS computer programs. The EAL and STAGS solutions were obtained with a fine finite element mesh and are very accurate. These finite element solutions together with the PASCO results for pure longitudinal compression provide benchmark calculations to evaluate other analysis procedures
Effects of annealing and strain on La_{1-x}Ca_{x}MnO_{3} thin films: a new phase diagram in the ferromagnetic region
Oriented, single phase thin films of La_{1-x}Ca_{x}MnO_{3} have been
deposited onto (100)-oriented LaAlO_{3} (0.1<x<0.5) substrates using the Pulsed
Laser Deposition technique. While for some compositions the physical properties
(transport and magnetization) of the as-grown films are higher than the bulk
values, for other calcium contents the optimized properties are obtained only
after annealing under oxygen. These data can be partly explained by changes in
oxygen content, resulting in cationic vacancies and thus self-doping effects -
accompanying structural changes, may be the cause of properties beyond the
phase diagram. We propose a new phase diagram for
(La_{1-x}Ca_{x})_{1-y}\square_{y}MnO_{3} (0.1<x<0.5) thin films.Comment: 8 pages, 5 figures submitted to Applied Physics Letter
The effect of substrate induced strain on the charge-ordering transition in Nd_{0.5}Sr_{0.5}MnO_{3} thin films
We report the synthesis and characterization of Nd_{0.5}Sr_{0.5}MnO_{3} thin
films grown by the Pulsed Laser Deposition technique on 100 -oriented LaAlO_{3}
substrates. X-ray diffraction (XRD) studies show that the films are 101
-oriented, with a strained and quasi-relaxed component, the latter increasing
with film thickness. We observe that transport properties are strongly
dependent on the thickness of the films. Variable temperature XRD down to 100 K
suggests that this is caused by substrate induced strain on the films.Comment: 3 pages REVTeX, 4 figures included, submitted to AP
Nonintrusive Flowmeter
The results of analytical and experimental work performed in the design, fabrication, and test of a prototype nonintrusive gaging system for use in monitoring the consumption of earth-storable fuels and oxidants in either a one-g or a zero-g environment are explained. The design specifications were those applicable to the reaction control system and to the orbital maneuvering system (OMS) fuel and oxidant on the space shuttle while in orbit. The major requirement was for the measurement of flow pulses with sufficient accuracy to provide a continuous knowledge of the fuel and oxidant remaining in the OMS system to within 1% or better. An ultrasonic frequency chirp technique was used having a high inherent rejection for signals traversing stray paths, and for random noise generated by the flowing liquid. A detailed analysis of the frequency chirp approach for two modes of operation (period and phase changes), including an error analysis are reported
Normal State Nernst Effect in Electron-doped Pr2-xCexCuO4: Superconducting Fluctuations and Two-band Transport
We report a systematic study of normal state Nernst effect in the
electron-doped cuprates PrCeCuO over a wide range of
doping (0.050.21) and temperature. At low temperatures, we
observed a notable vortex Nernst signal above T in the underdoped films,
but no such normal state vortex Nernst signal is found in the overdoped region.
The superconducting fluctuations in the underdoped region are most likely
incoherent phase fluctuations as found in hole-doped cuprates. At high
temperatures, a large normal state Nernst signal is found at dopings from
slightly underdoped to highly overdoped. Combined with normal state
thermoelectric power, Hall effect and magnetoresistance measurements, the large
Nernst effect is compatible with two-band model. For the highly overdoped
films, the large Nernst effect is anomalous and not explainable with a simple
hole-like Fermi surface seen in photoemission experiments.Comment: 9 pages, 8 figures, accepted in PR
- …