Hydrodynamic air lubricated compliant surface bearing for an automotive gas turbine engine. 2: Materials and coatings

Material coatings for an air-lubricated, compliant journal bearing for an automotive gas turbine engine were exposed to service test temperatures of 540 C or 650 C for 300 hours, and to 10 temperature cycles from room temperatures to the service test temperatures. Selected coatings were then put on journal and partial-arc foils and tested in start-stop cycle tests at 14 kPa (2 psi) loading for 2000 cycles. Half of the test cycles were performed at a test chamber service temperature of 540 C (1000 F) or 650 C (1200 F); the other half were performed at room temperature. Based on test results, the following combinations and their service temperature limitations are recommended: HL-800 TM (CdO and graphite) on foil versus chrome carbide on journal up to 370 C (700 F); NASA PS 120 (Tribaloy 400, silver and CaF2 on journal versus uncoated foil up to 540 C (1000 F); and Kaman DES on journal and foil up to 640 C (1200 F). Kaman DES coating system was further tested successfully at 35 kPa (5 psi) loading for 2000 start-stop cycles

Energy Efficient Engine Program: Technology Benefit/Cost Study, Volume II

The Benefit/Cost Study portion of the NASA-sponsored Energy Efficient Engine Component Development and Integration program was successful in achieving its objectives: identification of air transport propulsion system technology requirements for the years 2000 and 2010, and formulation of programs for developing these technologies. It is projected that the advanced technologies identified, when developed to a state of readiness, will provide future commercial and military turbofan engines with significant savings in fuel consumption and related operating costs. These benefits are significant and far from exhausted. The potential savings translate into billions of dollars in annual savings for the airlines. Analyses indicate that a significant portion of the overall savings is attributed to aerodynamic and structure advancements. Another important consideration in acquiring these benefits is developing a viable reference technology base that will permit engines to operate at substantially higher overall pressure ratios and bypass ratios. Results have pointed the direction for future research and a comprehensive program plan for achieving this was formulated. The next major step is initiating the program effort that will convert the advanced technologies into the expected benefits

Rapid Water Reduction to H_2 Catalyzed by a Cobalt Bis(iminopyridine) Complex

A cobalt bis(iminopyridine) complex is a highly active electrocatalyst for water reduction, with an estimated apparent second order rate constant k_(app) ≤ 10^7 M^(–1)s^(–1) over a range of buffer/salt concentrations. Scan rate dependence data are consistent with freely diffusing electroactive species over pH 4–9 at room temperature for each of two catalytic reduction events, one of which is believed to be ligand based. Faradaic H_2 yields up to 87 ± 10% measured in constant potential electrolyses (−1.4 V vs SCE) confirm high reactivity and high fidelity in a catalyst supported by the noninnocent bis(iminopyridine) ligand. A mechanism involving initial reduction of Co^(2+) and subsequent protonation is proposed

The crystal and molecular structure of Hydridotetrakis(diethyl phenylphosphonite)cobalt(I)

An X-ray structure determination of the title compound shows that the co-ordination about the cobalt atom is approximately trigonal bipyramidal; n.m.r. data indicate that the complex is non-rigid in solution

Further thoughts on precision

Background: There has been much discussion amongst automated software defect prediction researchers regarding use of the precision and false positive rate classifier performance metrics. Aim: To demonstrate and explain why failing to report precision when using data with highly imbalanced class distributions may provide an overly optimistic view of classifier performance. Method: Well documented examples of how dependent class distribution affects the suitability of performance measures. Conclusions: When using data where the minority class represents less than around 5 to 10 percent of data points in total, failing to report precision may be a critical mistake. Furthermore, deriving the precision values omitted from studies can reveal valuable insight into true classifier performancePeer reviewedFinal Accepted Versio

Distributed microprocessors in a tactical universal modem

The distributed microprocessor system associated with a wideband signal conversion unit (WBSCU) is described. Multiple embedded 8086 and 2901 microprocessors, supported by dedicated hardware modules, perform the required real time operations for both transmit and receive functions. Commands from a host computer determine the configuration of the WBSCU via the IEEE 488 bus. Each of the four WBSCU channels is assigned to process a specified IF waveform; each channel configures its own resources and, in some cases, borrows resources from other channels. The processed waveform data is communicated from individual channels to redundant global memories. Data flow between the user community and global memories occurs via redundant 1553 buses through intelligent Bus Interface Units. Each WBSCU channel contains one 2901 bit slice machine and one 8086 microprocessor. The 2901 provides high speed processing capability for the most time critical operations. The 8086 is used for lower speed processing tasks where its high level language capability can be better exploited. Each 8086 has a global bus for wideband interprocessor communication, and a local bus for 8086/2901, master/slave communication. Software architecture consists of a control and communications structure governing mode dependent signal processing tasks

DIRECT MARKETING IN THE 1990S: TENNESSEE'S NEW FARMERS' MARKETS

Marketing,

SUPERMARKET PATRONAGE: AN ANALYSIS OF CUSTOMER COUNTS AMONG OUTLETS WITHIN A GEOGRAPHIC AREA

As new supermarket management tools are introduced, the need for an improved understanding of store patronage is growing. Weekly customer counts for five supermarkets located in a Southeastern metropolitan area covering 261 weeks are analyzed. Descriptive statistics indicate that food shopper patterns vary by outlet. Regression equations are estimated for each location. Results point to store specific relationships. They indicate that evaluation of television and radio ads and double couponing can be quite involved.Consumer/Household Economics,

LOCATION AND OTHER MARKET ATTRIBUTES AFFECTING FARMER'S MARKET PATRONAGE: THE CASE OF TENNESSEE

Consumer/Household Economics,

FORECASTING ITEM MOVEMENT WITH SCAN DATA: BOX-JENKINS RESULTS

Preliminary forecasts using the Box-Jenkins methodology for supermarket scan data for ground beef and roast item movement are described. The functional form and the accuracy of the forecasts vary by product. Results suggest that further analyses incorporating price and advertising may increase the accuracy of the forecasts.Food Consumption/Nutrition/Food Safety, Marketing,