Noise and signal modeling of various VCSEL structures

Current evolution in Datacoms and Gigabit Ethernet have made 850nm Vertical Cavity Surface Emitting Lasers(VCSEL) the most important and promising emitter. Numerous different structures have been growth, to obtain bestcurrent confinement and then to control the emitted light modal behavior. We have developed a small signal equivalent electrical model of VCSEL including Bragg reflectors, active area, chip connection and noise behavior. Easy tointegrate with classical software for circuit studies, this model which is widely adaptable for different structures takesinto account the complete electrical environment of the chip. An experimental validation for RF modulation up to 10GHz has been realized on oxide confined VCSEL, demonstrating that the model could be used to get realistic valuesfor the VCSEL intrinsic parameters.Including Langevin noise sources into the rate equations and using the same electrical analogy, noise current andvoltage sources can be added to the model. It allows good prediction for the RIN function shape up to 10GHz formonomodal emitter

Motor imagery training improves precision of an upper limb movement in patients with hemiparesis

BACKGROUND: In healthy participants, beneficial effects of motor imagery training on movement execution have been shown for precision, strength, and speed. In the clinical context, it is still debated whether motor imagery provides an effective rehabilitation technique in patients with motor deficits.OBJECTIVE: To compare the effectiveness of two different types of movement training: motor imagery vs. motor execution.METHODS: Twenty-five patients with hemiparesis were assigned to one of two training groups: the imagery or the execution-training group. Both groups completed a baseline test before they received six training sessions, each of which was followed by a test session. Using a novel and precisely quantifiable test, we assessed how accurately patients performed an upper limb movement. RESULTS: Both training groups improved performance over the six test sessions but the improvement was significantly larger in the imagery group. That is, the imagery group was able to perform more precise movements than the execution group after the sixth training session while there was no difference at the beginning of the training.CONCLUSIONS: The results provide evidence for the benefit of motor imagery training in patients with hemiparesis and thus suggest the integration of cognitive training in conventional physiotherapy practice

Pulmonary thrombembolism as cause of death on unenhanced postmortem 3T MRI

Objectives: To investigate unenhanced postmortem 3-T MR imaging (pmMRI) for the detection of pulmonary thrombembolism (PTE) as cause of death. Methods: In eight forensic cases dying from a possible cardiac cause but with homogeneous myocardium at cardiac pmMRI, additional T2w imaging of the pulmonary artery was performed before forensic autopsy. Imaging was carried out on a 3-T MR system in the axial and main pulmonary artery adapted oblique orientation in situ. In three cases axial T2w pmMRI of the lower legs was added. Validation of imaging findings was performed during forensic autopsy. Results: All eight cases showed homogeneous material of intermediate signal intensity within the main pulmonary artery and/or pulmonary artery branches. Autopsy confirmed the MR findings as pulmonary artery thrombembolism. At lower leg imaging unilateral dilated veins and subcutaneous oedema with or without homogeneous material of intermediate signal intensity within the popliteal vein were found. Conclusions: Unenhanced pmMRI demonstrates pulmonary thrombembolism in situ. PmMR may serve as an alternative to clinical autopsy, especially when consent cannot be obtained. Key Points: • Postmortem MRI (pmMRI) provides an alternative to clinical autopsy • Fatal pulmonary thrombembolism (PTE) can now be diagnosed using postmortem MRI (pmMRI). • Special attention has to be drawn to the differentiation of postmortem clot

Microbial Cell Factories / \u201cDirect cloning in Lactobacillus plantarum: Electroporation with non-methylated plasmid DNA enhances transformation efficiency and makes shuttle vectors obsolete\u201d

Background: Lactic acid bacteria (LAB) play an important role in agricultural as well as industrial biotechnology. Development of improved LAB strains using e.g. library approaches is often limited by low transformation efficiencies wherefore one reason could be differences in the DNA methylation patterns between the Escherichia coli intermediate host for plasmid amplification and the final LAB host. In the present study, we examined the influence of DNA methylation on transformation efficiency in LAB and developed a direct cloning approach for Lactobacillus plantarum CD033. Therefore, we propagated plasmid pCD256 in E. coli strains with different dam/dcm-methylation properties. The obtained plasmid DNA was purified and transformed into three different L. plantarum strains and a selection of other LAB species. Results: Best transformation efficiencies were obtained using the strain L. plantarum CD033 and non-methylated plasmid DNA. Thereby we achieved transformation efficiencies of ~ 109 colony forming units/\u3bcg DNA in L. plantarum CD033 which is in the range of transformation efficiencies reached with E. coli. Based on these results, we directly transformed recombinant expression vectors received from PCR/ligation reactions into L. plantarum CD033, omitting plasmid amplification in E. coli. Also this approach was successful and yielded a sufficient number of recombinant clones. Conclusions: Transformation efficiency of L. plantarum CD033 was drastically increased when non-methylated plasmid DNA was used, providing the possibility to generate expression libraries in this organism. A direct cloning approach, whereby ligated PCR-products where successfully transformed directly into L. plantarum CD033, obviates the construction of shuttle vectors containing E. coli-specific sequences, as e.g. a ColEI origin of replication, and makes amplification of these vectors in E. coli obsolete. Thus, plasmid constructs become much smaller and occasional structural instability or mutagenesis during E. coli propagation is excluded. The results of our study provide new genetic tools for L. plantarum which will allow fast, forward and systems based genetic engineering of this species

Reconsidering endemism in the Northeastern Limestone Alps

The restricted distribution of endemic plant species in the Northern Limestone Alps is commonly explained by a severe loss of biotypes and genetic plasticity during Pleistocene glaciation. In the present paper we examine the ecological features of the regional endemic species and plant communities to see if they actually support this interpretation. In particular, we focus on (1) species composition and habitat characteristics of endemic plant communities, (2) the frequency of endemic species in different plant communities and habitat types, (3) the correlation between the frequency of endemic species and the density of the vegetation cover and (4) the altitudinal distribution of endemic species. Concerning endemic plant communities, there is considerable variation in species composition as well as in habitat requirements. Communities of rock, scree and snowbed habitats are characterised by the predominance of endemic or subendemic species, whereas endemic alpine grassland types contain mainly non-endemic plants. Regarding the distribution of endemic plants, no uniform trend could be detected. The endemic species pool contains plants restricted to azonal stands as well as typical species of climax grasslands and widespread generalists. Some endemics distinctly prefer open vegetation types, others predominantly occur in dense grasslands. The bulk of the species considered performs best in the lower alpine zone, some others are especially common in the subalpine zone, whereas only one species showed an occurrence peak in the upper alpine belt. In summary, it may be said that the habitat requirements of endemic plants are rather species-specific and that there are only a few general trends. This fact seems to indicate the complex nature of the phenomenon of regional endemism, which is influenced by a range of factors. The prevailing historical explanation may not be appropriate for every species. Hence, the consideration of current ecological conditions in addition to historical factors may provide a more comprehensive explanation of regional endemism

Forensic exploitation of patterned injuries: Promoting structured analysis as an early assessment for comparison process.

Practice at our Center shows that approach using 3D surface imaging for morphometric comparison of patterned injuries does not always lead to accurate conclusions. We decided to evaluate whether a selection protocol focused on analysis phase could enable us to form an early assessment of the outcome of a comparison process, and then to select lesions likely to lead to a probative conclusion. 23 blunt objects were used to create 65 patterned injuries on an experimental model simulating human skin. A blinded analysis and a comparison were conducted on photographs and 3D models of the lesions. Statement of analysis phase was consistent with comparison results in most cases, enabling correct identification of the responsible object or at least keeping it as possibly responsible among 2 to 3 objects. Our protocol has been demonstrated to improve ability to exploit patterned injuries from surface imaging, despite certain limiting factors

Vestibular thresholds for yaw rotation about an earth-vertical axis as a function of frequency

Perceptual direction detection thresholds for yaw rotation about an earth-vertical axis were measured at seven frequencies (0.05, 0.1, 0.2, 0.5, 1, 2, and 5Hz) in seven subjects in the dark. Motion stimuli consisted of single cycles of sinusoidal acceleration and were generated by a motion platform. An adaptive two-alternative categorical forced-choice procedure was used. The subjects had to indicate by button presses whether they perceived yaw rotation to the left or to the right. Thresholds were measured using a 3-down, 1-up staircase paradigm. Mean yaw rotation velocity thresholds were 2.8degs−1 for 0.05Hz, 2.5degs−1 for 0.1Hz, 1.7degs−1 for 0.2Hz, 0.7degs−1 for 0.5Hz, 0.6degs−1 for 1Hz, 0.4 degs−1 for 2Hz, and 0.6degs−1 for 5Hz. The results show that motion thresholds increase at 0.2Hz and below and plateau at 0.5Hz and above. Increasing velocity thresholds at lower frequencies qualitatively mimic the high-pass characteristics of the semicircular canals, since the increase at 0.2Hz and below would be consistent with decreased gain/sensitivity observed in the VOR at lower frequencies. In fact, the measured dynamics are consistent with a high pass filter having a threshold plateau of 0.71degs-1 and a cut-off frequency of 0.23Hz, which corresponds to a time constant of approximately 0.70s. These findings provide no evidence for an influence of velocity storage on perceptual yaw rotation threshold

Severe pelvic injury: vascular lesions detected by ante- and post-mortem contrast medium-enhanced CT and associations with pelvic fractures.

The objectives of this study were to compare arterial and venous contrast medium extravasation in severe pelvic injury detected by ante- and post-mortem multi-detector CT (MDCT) and determine whether vascular injury is associated with certain types of pelvic fracture. We retrospectively included two different cohorts of blunt pelvic trauma with contrast medium extravasation shown by MDCT. The first group comprised 49 polytrauma patients; the second included 45 dead bodies undergoing multi-phase post-mortem CT-angiography (MPMCTA). Two radiologists jointly reviewed each examination concerning type, site of bleeding and pattern of underlying pelvic ring fracture. All 49 polytrauma patients demonstrated arterial bleeding, immediately undergoing subsequent angiography; 42 (85%) had pelvic fractures, but no venous bleeding was disclosed. MPMCTA of 45 bodies revealed arterial (n = 33, 73%) and venous (n = 35, 78%) bleeding and pelvic fractures (n = 41, 91%). Pelvic fracture locations were significantly correlated with ten arterial and six venous bleeding sites in dead bodies, with five arterial bleeding sites in polytrauma patients. In dead bodies, arterial haemorrhage was significantly correlated with the severity of pelvic fracture according to Tile classification (p = 0.01), unlike venous bleeding (p = 0.34). In severe pelvic injury, certain acute bleeding sites were significantly correlated with underlying pelvic fracture locations. MPMCTA revealed more venous lesions than MDCT in polytrauma patients. Future investigations should evaluate the proportional contribution of venous bleeding to overall pelvic haemorrhage as well as its clinical significance

A fatal case of oxygen embolism in a hospital

This case reports on a 68-year-old man who was found dead in hospital next to his bed. Before this, he had been treated with intravenous antibiotics for pneumonia. The body was found with a peripheral venous catheter connected to a nasal cannula delivering oxygen (O2) from the wall. Extensive medico–legal examinations were performed, including post-mortem computed tomography (CT), complete conventional autopsy, histological and immunohistochemistry analysis, toxicological analysis and post-mortem chemistry. Additionally, CT-guided gas sampling was performed at multiple sites to collect samples for gas analysis. During the external examination, massive subcutaneous emphysema was visible over the entire surface of the body. The CT scan revealed the presence of gas throughout the vascular system, and in the subcutaneous and muscular tissues. The autopsy confirmed the presence of lobar pneumonia and multiple gas bubbles in the vascular system. The gas analysis results showed a subnormal concentration of oxygen, confirming the suspected pure O2 embolism. Moreover, the carbon dioxide (CO2) concentration in the gas sample from the heart was elevated to a level similar to those found in scuba diving fatalities. This could come from degassing of dissolved CO2 that accumulated and was trapped in the cardiac cavity. Based on the results of the different exams performed, and especially the gas analysis results, it was concluded that the cause of death was O2 embolism