Effects of Acetate on Cation Exchange Capacity of a Zn-Containing Montmorillonite:Physicochemical Significance and Metal Uptake

Fundamental properties such as cation exchange capacity (CEC), permanent charge, pH(PZC), and metal uptake of a Zn-containing montmorillonite are modified, in a predictable manner, by a mild chemical treatment using acetate. Acetate treatment allows a controllable increase of the CEC of montmorillonite up to 180 mequiv/100 g. The CEC of the clay is increasing for decreasing Zn content, with a slope of Delta[Zn/Delta[CEC] approximate to -2. X-ray powder diffraction analysis shows that the lamellar structure of the clay remains unaltered by the acetate treatment, while XPS substantiates the removal of Zn. H(+) uptake data show that the intrinsic protonation pK values and concentration of the variable charge sites ( SOH) are not modified by the acetate treatment. In contrast, the concentration of the permanent charge sites ( X(-)) increased linearly with Zn removal by acetate, leading to a significant H(+) and Cd(2+) uptake enhancement. A physical model is suggested where acetate removes Zn ions strongly bound in the clay, and this in turn modulates the permanent charge and the CEC of the clay

Graphene/Carbon Dot Hybrid Thin Films Prepared by a Modified Langmuir-Schaefer Method

The special electronic, optical, thermal, and mechanical properties of graphene resulting from its 2D nature, as well as the ease of functionalizing it through a simple acid treatment, make graphene an ideal building block for the development of new hybrid nanostructures with well-defined dimensions and behavior. Such hybrids have great potential as active materials in applications such as gas storage, gas/liquid separation, photocatalysis, bioimaging, optoelectronics, and nanosensing. In this study, luminescent carbon dots (C-dots) were sandwiched between oxidized graphene sheets to form novel hybrid multilayer films. Our thin-film preparation approach combines self-assembly with the Langmuir-Schaefer deposition and uses graphene oxide nanosheets as template for grafting C-dots in a bidimensional array. Repeating the cycle results in a facile and low-cost layer-by-layer procedure for the formation of highly ordered hybrid multilayers, which were characterized by photoluminescence, UV-visible, X-ray photoelectron, and Raman spectroscopies, as well as X-ray diffraction and atomic force microscopy.</p

Clay-fulleropyrrolidine nanocomposites

In this work, we describe the insertion of a water-soluble bisadduct fulleropyrrolidine derivative into the interlayer space of three layered smectite clays. The composites were characterized by a combination of powder X-ray diffraction, transmission electron microscopy, X-ray photoemission and FTIR spectroscopies, and laser flash photolysis measurements. The experiments, complemented by computer simulations, give insight into the formation process, structural details, and properties of the fullerene/clay nanocomposites. The reported composite materials constitute a new hybrid system, where C-60 differs from its crystals or its solutions, and open new perspectives for the design and construction of novel C-60-based organic/clay hybrid materials.</p

Electronic properties of germanane field-effect transistors

A new two dimensional (2D) material—germanane—has been synthesised recently with promising electrical and optical properties. In this paper we report the first realisation of germanane field-effect transistors fabricated from multilayer single crystal flakes. Our germanane devices show transport in both electron and hole doped regimes with on/off current ratio of up to 10e5(10e4) and carrier mobilities of 150  cm2 (Vs)−1(70 cm2 (Vs)−1) at 77 K (room temperature). A significant enhancement of the device conductivity under illumination with 650 nm red laser is observed. Our results reveal ambipolar transport properties of germanane with great potential for (opto)electronics applications

Carbon Nanotubes Encapsulating Superconducting Single-Crystalline Tin Nanowires

Superconducting low dimensional systems are the natural choice for fast and sensitive infrared detection, because of their quantum nature and the low-noise, cryogenic operation environment. On the other hand, monochromatic and coherent electron beams, emitted from superconductors and carbon-based nanostructured materials, respectively, are significant for the development of electron optical systems such as electron microscopes and electron-beam nanofabrication systems. Here we describe for the first time a simple method which yields carbon nanotubes encapsulating single crystalline superconducting tin nanowires by employing the catalytic chemical vapor deposition method over solid tin dioxide. The superconducting tin nanowires, with diameters 15-35 nm, are covered with well-graphitized carbon walls and show, due to their reduced diameters, a critical magnetic field (Hc) more than 30 times higher than the value of bulk metallic tin.

Mineralogical and geochemical analysis of Fe-phases in drill-cores from the Triassic Stuttgart Formation at Ketzin CO₂ storage site before CO₂ arrival

Reactive iron (Fe) oxides and sheet silicate-bound Fe in reservoir rocks may affect the subsurface storage of CO2 through several processes by changing the capacity to buffer the acidification by CO2 and the permeability of the reservoir rock: (1) the reduction of three-valent Fe in anoxic environments can lead to an increase in pH, (2) under sulphidic conditions, Fe may drive sulphur cycling and lead to the formation of pyrite, and (3) the leaching of Fe from sheet silicates may affect silicate diagenesis. In order to evaluate the importance of Fe-reduction on the CO2 reservoir, we analysed the Fe geochemistry in drill-cores from the Triassic Stuttgart Formation (Schilfsandstein) recovered from the monitoring well at the CO2 test injection site near Ketzin, Germany. The reservoir rock is a porous, poorly to moderately cohesive fluvial sandstone containing up to 2–4 wt% reactive Fe. Based on a sequential extraction, most Fe falls into the dithionite-extractable Fe-fraction and Fe bound to sheet silicates, whereby some Fe in the dithionite-extractable Fe-fraction may have been leached from illite and smectite. Illite and smectite were detected in core samples by X-ray diffraction and confirmed as the main Fe-containing mineral phases by X-ray absorption spectroscopy. Chlorite is also present, but likely does not contribute much to the high amount of Fe in the silicate-bound fraction. The organic carbon content of the reservoir rock is extremely low (<0.3 wt%), thus likely limiting microbial Fe-reduction or sulphate reduction despite relatively high concentrations of reactive Fe-mineral phases in the reservoir rock and sulphate in the reservoir fluid. Both processes could, however, be fuelled by organic matter that is mobilized by the flow of supercritical CO2 or introduced with the drilling fluid. Over long time periods, a potential way of liberating additional reactive Fe could occur through weathering of silicates due to acidification by CO2

Layer-by-Layer Assembly of Graphene-Based Hybrid Materials

This chapter attempts to provide a comprehensive and critical overview of the most recent developments on the use of Layer-by-Layer (LbL) and Langmuir-Blodgett (LB) techniques for the design and construction of novel graphene-based hybrids. The structural, physicochemical, electronic, mechanical, and tribological properties of these hybrid systems are discussed, while emphasis is placed on their potential applications in various fields such as electronics, sensors, and ion batteries