INVESTIGATING THE SOLUTIONS TO NON-LINEAR SECOND ORDER DIFFERENTIAL EQUATIONS

The main focus of this paper is that in which the nonlinearity does not occur in the highest differentiated term.This paper will further discuss one observed method. The method to be presented has the particular advantage that its wide scope and application, yet it is constrained to differential equations that are associated with nonconservative systems.We wish to extend the results of [2] to all real numbers in the domain of x. The Ermakov-Pinney method of lineraization was employed to obtain solvable form of the equation. An implicit solution of the nonlinear differential equation y00 + P(x)y = qm(x)=ym is found to be y = jw[(C1 R dx w2 + C2)2 + C3]j 1 1mjj + C4 if qm(x) = w(x)m3. Where w is the combination of two linearly independent solutions u and v, such the w(x) = au(x) + bv(x), as well as \u27 = R w(x)2dx. Where C1,C2,C3, and C4 are arbitrary constants

Estimaciones de la fuerza de mordida y su relación con las características de la dieta

La fuerza de mordida (FM) es un parámetro biomecánico que indica la cantidad de fuerza que se aplica durante la masticación de un determinado tipo de alimento. En este trabajo se compararon las FM de seis poblaciones de humanos modernos que difieren en las características de sus dietas. A partir de fotografías de la base del cráneo se digitalizaron puntos morfológicos que determinan la forma de los músculos masticadores y permiten las estimaciones de los brazos de carga y resistencia para el cálculo de la FM. Los resultados indican que existen diferencias en la FM de los grupos clasificados como dieta dura (DD) y los asignados a la una dieta blanda (DB) a nivel de la mordida de corte (incisivos centrales), pero no de la mordida trituradora (mordida bilateral). También queda en evidencia que las diferencias más grandes vienen dadas por las diferencias poblacionales, luego por el tipo de dieta (DD o DB) y finalmente por la diferencia entre sexos, todas estas diferencias son también más evidentes en la mordida de corte que en la trituradora. Finalmente, algunas distinciones entre individuos de distintos sexos, indicarían que la división de trabajo trajo aparejada una diferencia en el consumo de alimentos.The bite force is a biomechanical parameter that indicates the amount of force applied during the mastication of a type of food. In this paper, we compared the bite force of six modern human populations which differ in the diets characteristics. Morphological points were digitized on skull base photographs, determining the shape of the masticatory muscles and allowing estimates of load and resistance arms in order to measure the bite force. The results indicate differences in the bite force between groups with a hard diet and those with a soft diet as regards the cutting bite (central incisors), but not the crushing one (bilateral bite). Also, the greatest differences are due to population differences in the first place, followed by the type of diet (hard or soft ones) and, finally, the difference between sexes. These differences are also more evident in the cutting bite than in the crushing one. Finally, some distinctions between males and females would indicate that the division of work entailed differences in food consumption.Fil: Paschetta, Carolina Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Nacional Patagónico; ArgentinaFil: Gonzalez Jose, Rolando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Nacional Patagónico; Argentin

Body shape: Implications in the study of obesity and related traits

Basado en el creciente avance de técnicas de computación que permiten describir o predecir características a partir de diferentes representaciones de datos, y tomando como punto de partida la creciente epidemia de obesidad y sobrepeso decretada por la Organización Mundial de la Salud (OMS). Se propone un método de segmentación 3D de escaneos corporales que, junto con técnicas de morfometría geométrica, permite cuantificar la distribución del tejido adiposo en el abdomen. Específicamente, se analizó un conjunto de circunferencias del cuerpo a partir de landmarks posicionados anatómicamente. Posteriormente se calculó un análisis de componentes principales para comparar las variables de forma con los datos antropométricos (peso, altura y circunferencia de cintura y cadera). Los indicadores de forma generados a partir de este nuevo enfoque se correlacionan con el comportamiento de los marcadores clásicos: Índice de Masa Corporal, Índice Cintura Cadera, Índice Cintura Talla.Based on the growing advancement of computer techniques that allow describing or predicting characteristics from different data representations and taking as a starting point the growing obesity and overweight epidemic decreed by the World Health Organization. A method of 3D segmentation of body scans is proposed that, together with geometric morphometric techniques, allows to quantify the distribution of adipose tissue in the abdomen. Specifically, a set of body circumferences was analyzed, each one defined from anatomically positioned landmarks. Subsequently, a principal component analysis was calculated to compare the shape variables with the anthropometric data (weight, height and waist and hip circumference). The shape indicators generated from this new approach are correlated with the behavior of the classic markers: Body Mass Index, Waist-Hip Index, Waist-Height Index.Fil: Navarro, Jose Pablo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Delrieux, Claudio Augusto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca; ArgentinaFil: Gonzalez-Jose, Rolando. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina5ta Jornadas de Intercambio y Difusión de los Resultados de Investigaciones de los Doctorandos en IngenieríaBuenos AiresArgentinaUniversidad Tecnológica Naciona

Vertebral morphology in extant porpoises: Radiation and functional implications

Vertebral morphology has profound biomechanical implications and plays an important role in adaptation to different habitats and foraging strategies for cetaceans. Extant porpoise species (Phocoenidae) display analogous evolutionary patterns in both hemispheres associated with convergent evolution to coastal versus oceanic environments. We employed 3D geometric morphometrics to study vertebral morphology in five porpoise species with contrasting habitats: the coastal Indo-Pacific finless porpoise (Neophocaena phocaenoides); the mostly coastal harbor porpoise (Phocoena phocoena) and Burmeister's porpoise (Phocoena spinipinnis); and the oceanic spectacled porpoise (Phocoena dioptrica) and Dall's porpoise (Phocoenoides dalli). We evaluated the radiation of vertebral morphology, both in size and shape, using multivariate statistics. We supplemented data with samples of an early-radiating delphinoid species, the narwhal (Monodon monoceros); and an early-radiating delphinid species, the white-beaked dolphin (Lagenorhynchus albirostris). Principal component analyses were used to map shape variation onto phylogenies, and phylogenetic constraints were investigated through permutation tests. We established links between vertebral morphology and movement patterns through biomechanical inferences from morphological presentations. We evidenced divergence in size between species with contrasting habitats, with coastal species tending to decrease in size from their estimated ancestral state, and oceanic species tending to increase in size. Regarding vertebral shape, coastal species had longer centra and shorter neural processes, but longer transverse processes, while oceanic species tended to have disk-shaped vertebrae with longer neural processes. Within Phocoenidae, the absence of phylogenetic constraints in vertebral morphology suggests a high level of evolutionary lability. Overall, our results are in accordance with the hypothesis of speciation within the family from a coastal ancestor, through adaptation to particular habitats. Variation in vertebral morphology in this group of small odontocetes highlights the importance of environmental complexity and particular selective pressures for the speciation process through the development of adaptations that minimize energetic costs during locomotion and prey capture.Fil: Marchesi, María Constanza. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Centro para el Estudio de Sistemas Marinos; ArgentinaFil: Galatius, Anders. University Aarhus; DinamarcaFil: Zaffino, Martina. Universidad Nacional de la Patagonia "San Juan Bosco"; ArgentinaFil: Coscarella, Mariano Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Centro para el Estudio de Sistemas Marinos; Argentina. Universidad Nacional de la Patagonia "San Juan Bosco"; ArgentinaFil: Gonzalez-Jose, Rolando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentin

Reconstruction of Iberian ceramic potteries using generative adversarial networks

Several aspects of past culture, including historical trends, are inferred from time-based patterns observed in archaeological artifacts belonging to different periods. The presence and variation of these objects provides important clues about the Neolithic revolution and given their relative abundance in most archaeological sites, ceramic potteries are significantly helpful in this purpose. Nonetheless, most available pottery is fragmented, leading to missing morphological information. Currently, the reassembly of fragmented objects from a collection of thousands of mixed fragments is a daunting and time-consuming task done almost exclusively by hand, which requires the physical manipulation of the fragments. To overcome the challenges of manual reconstruction and improve the quality of reconstructed samples, we present IberianGAN, a customized Generative Adversarial Network (GAN) tested on an extensive database with complete and fragmented references. We trained the model with 1072 samples corresponding to Iberian wheel-made pottery profiles belonging to archaeological sites located in the upper valley of the Guadalquivir River (Spain). Furthermore, we provide quantitative and qualitative assessments to measure the quality of the reconstructed samples, along with domain expert evaluation with archaeologists. The resulting framework is a possible way to facilitate pottery reconstruction from partial fragments of an original piece.Fil: Navarro, Jose Pablo. Universidad Nacional de la Patagonia "San Juan Bosco". Facultad de Ingeniería - Sede Puerto Madryn. Departamento de Informática; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Cintas, Celia. Catholic University Of Eastern Africa; KeniaFil: Lucena, Manuel. Universidad de Jaén; EspañaFil: Fuertes, José Manuel. Universidad de Jaén; EspañaFil: Segura, Rafael. Universidad de Jaén; EspañaFil: Delrieux, Claudio Augusto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Ciencias e Ingeniería de la Computación. Universidad Nacional del Sur. Departamento de Ciencias e Ingeniería de la Computación. Instituto de Ciencias e Ingeniería de la Computación; Argentina. Universidad Nacional del Sur; ArgentinaFil: Gonzalez-Jose, Rolando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentin

Vertebral Morphology in Partially Sympatric Dolphins: A 3D Approach

In cetaceans, increased body flexibility is associated with increased maneuverability, this affects the animal’s swimming speed and foraging behavior. A more stable body form is associated with fast swimming and wide turns. One factor that affects the flexibility of a cetacean’s body is the structure and interaction of its vertebrae. Differences in vertebral morphology confer different muscular insertion sites and affect mechanical properties of swimming muscles. We studied vertebral morphology in four closely related and partially sympatric dolphin species from the Southern Hemisphere: Commerson’s dolphin (Cephalorhynchus commersonii), Peale’s dolphin (Lagenorhynchus australis), the dusky dolphin (Lagenorhynchus obscurus) and the hourglass dolphin (Lagenorhynchus cruciger). The former two species are usually considered coastal, associated with complex habitats where foraging strategies require greater maneuverability; they also show plasticity in their prey preferences. The latter two species are considered fastswimming cooperative feeders, with long distance movements reflecting prey availability in pelagic habitats. We employed three-dimensional (3D) geometric morphometric techniques and multivariate analyses to evaluate differences in vertebral morphology. Our analyses tested whether particular morphologies that limit or enhance flexibility were associated with preferred habitats and feeding strategies. We established links between morphology and behavioral patterns based on the biomechanical significance of specific vertebral morphological features. Principal component analyses (PCA) showed great differentiation between species in all the studied regions along the vertebral column. This was especially evident in the middle area, except in the case of dusky and hourglass dolphins which showed no discernible morphological difference in their mid-column vertebrae. PCA results were supported by statistically significant Mahalanobis distances (MD) between species. Species associated with complex habitats and behaviors possessed morphological features associated with greater flexibility of the column (i.e., spool-shaped vertebrae with short erect processes), whereas cooperative-feeder species possessed features associated with greater stability (i.e., disk-shaped vertebrae with long strongly bent processes). In these closely related and partially sympatric dolphins, vertebral morphology is distinctive and varies with the differential foraging strategies and habitat of each species. These findings reveal morphological plasticity among these dolphin species, highlighting the importance of behavioral complexity and of habitat use in the evolutionary development of morphological adaptations.Fil: Marchesi, María Constanza. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Centro para el Estudio de Sistemas Marinos; ArgentinaFil: Mora, Matias Sebastian. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Marinas y Costeras. Universidad Nacional de Mar del Plata. Facultad de Ciencias Exactas y Naturales. Instituto de Investigaciones Marinas y Costeras; ArgentinaFil: Dans, Silvana Laura. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Centro para el Estudio de Sistemas Marinos; ArgentinaFil: Coscarella, Mariano Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Centro para el Estudio de Sistemas Marinos; ArgentinaFil: Gonzalez-Jose, Rolando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentin

Outro estilo científico e tecnológico é possível

En junio de 2020 fue creada la Red de Pensamiento Latinoamericano en Ciencia, Tecnología y Sociedad (Red PLACTS). Conformada por integrantes del sector científico, tecnológico y universitario, impulsa una agenda que ponga el conocimiento, los recursos y el complejo CyT en proyectos destinados a resolver necesidades y problemas de nuestra sociedad. Se propone participar e incidir en las decisiones que se toman en la gestión de los organismos de CyT, contribuyendo con propuestas e ideas que apor-ten a construir un proyecto de país popular, igualitario, democrático, soberano, solidario, con perspectiva feminista y desde una mirada federal. Rescata y recupera en proyectos y acciones concretas los aportes de lo que fue históricamente el PLACTED (Pensamiento Latinoamericano en Ciencia, Tecnología, Desarrollo y Dependencia). En este primer docu-mento se describen las características principales de la dinámica tecnocientífica domi-nante a nivel global y se presentan algunas propuestas para impulsar un estilo científico tecnológico propio en nuestro país y la región.In June 2020, the Latin American Thought Network in Science, Technology and Society (PLACTS Network) was created. Made up of members of the scientific, technological and university sectors, it promotes an agenda that puts knowledge, resources and the S&T complex in projects aimed at solving the needs and problems of our society. It is proposed to participate and influence the decisions made in the management of S&T organizations, contributing with proposals and ideas that contribute to building a project of a popular, egalitarian, democratic, sovereign, supportive country, with a feminist perspective and from a perspective federal. It rescues and recovers in projects and concrete actions the contributions of what was historically PLACTED (Latin American Thought in Science, Technology, Development and Dependency). This first document describes the main characteristics of the dominant techno-scientific dynamics at a global level and presents some proposals to promote a technological scientific style of its own in our country and the regionEm junho de 2020, foi criada a Rede Latino-americana do Pensamento em Ciência, Tecnologia e Sociedade (Rede PLACTS). Composto por membros dos setores científico, tecnológico e universitário, promove uma agenda que coloca o conhecimento, os recursos e o complexo da C&T em projetos que visam a resolução das necessidades e dos problemas da nossa sociedade. Propõe-se participar e influenciar as decisões tomadas na gestão das organizações de C&T, contribuindo com propostas e ideias que contribuam para a construção de um projeto de país popular, igualitário, democrático, soberano, solidário, com uma perspectiva feminista e sob uma perspectiva Federal. Resgata e resgata em projetos e ações concretas as contribuições do que foi historicamente PLACTED (Pensamento Latino-Americano em Ciência, Tecnologia, Desenvolvimento e Dependência). Neste primeiro documento são descritas as principais características da dinâmica técnico-científica dominante a nível global e apresentadas algumas propostas para promover um estilo científico tecnológico próprio no nosso país e na região.Fil: Red de Pensamiento Latinoamericano en Ciencia, Tecnología y Sociedad. Universidad Nacional de La Plata; ArgentinaFil: Gonzalez-Jose, Rolando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentin

Iron bioaccessibility and sensory analysis of extruded cereals fortified with different Fe sources

To increase iron (Fe) intake in Fe deficiency-risk groups the combination of Fe source and food-vehicle must be chosen in order to minimize inhibitory effects of food matrix. Fe dialyzability and sensory properties were tested in six model systems (MS) made with extruded cereals fortified with different Fe sources such as FeNaEDTA, FeSO4 and EDTA/FeSO4 among others and with or without the addition of milk. Proximate composition and phytate content were also evaluated. Results showed that Fe dialyzability from samples fortified with FeNaEDTA was less affected by the presence of inhibitory factors such as phytates and milk. The addition of FeSO4 to the extrudates showed sensory differences. Furthermore, fortification with EDTA/FeSO4 or FeNaEDTA showed no sensory differences compared with unfortified or Feº (elemental iron) fortified matrix, with the advantage of increased iron bioaccessibility.Fil: Cagnasso, Carolina Elisa. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Calviño, Amalia Mirta. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Lopez, Laura Beatriz. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Cellerino, Karina. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Dyner, Luis Marcelo. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Binaghi, Maria Julieta. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; ArgentinaFil: Rodriguez, Viviana. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; ArgentinaFil: Drago, Silvina Rosa. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional del Litoral. Facultad de Ingeniería Química. Instituto de Tecnología de los Alimentos; ArgentinaFil: Gonzalez, Rolando Jose. Universidad Nacional del Litoral. Facultad de Ingeniería Química. Instituto de Tecnología de los Alimentos; ArgentinaFil: Valencia, Mirta Eva. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; Argentin

Inbreeding, native American ancestry and child mortality:Linking human selection and paediatric medicine

The children of related parents show increased risk of early mortality. The Native American genome typically exhibits long stretches of homozygosity, and Latin Americans are highly heterogeneous regarding the individual burden of homozygosity, the proportion and the type of Native American ancestry. We analysed nationwide mortality and genome-wide genotype data from admixed Chileans to investigate the relationship between common causes of child mortality, homozygosity and Native American ancestry. Results from two-stage linear-Poisson regression revealed a strong association between the sum length of runs of homozygosity (SROH) above 1.5 Megabases (Mb) in each genome and mortality due to intracranial non-traumatic haemorrhage of foetus and newborn (5% increased risk of death per Mb in SROH, P = 1 × 10(−3)) and disorders related to short gestation and low birth weight (P = 3 × 10(−4)). The major indigenous populations in Chile are Aymara–Quechua in the north of the country and the Mapuche–Huilliche in the south. The individual proportion of Aymara–Quechua ancestry was associated with an increased risk of death due to anencephaly and similar malformations (P = 4 × 10(−5)), and the risk of death due to Edwards and Patau trisomy syndromes decreased 4% per 1% Aymara–Quechua ancestry proportion (P = 4 × 10(−4)) and 5% per 1% Mapuche–Huilliche ancestry proportion (P = 2 × 10(−3)). The present results suggest that short gestation, low birth weight and intracranial non-traumatic haemorrhage mediate the negative effect of inbreeding on human selection. Independent validation of the identified associations between common causes of child death, homozygosity and fine-scale ancestry proportions may inform paediatric medicine

body2vec: 3D Point Cloud Reconstruction for Precise Anthropometry with Handheld Devices

Current point cloud extraction methods based on photogrammetry generate large amounts of spurious detections that hamper useful 3D mesh reconstructions or, even worse, the possibility of adequate measurements. Moreover, noise removal methods for point clouds are complex, slow and incapable to cope with semantic noise. In this work, we present body2vec, a model-based body segmentation tool that uses a specifically trained Neural Network architecture. Body2vec is capable to perform human body point cloud reconstruction from videos taken on hand-held devices (smartphones or tablets), achieving high quality anthropometric measurements. The main contribution of the proposed workflow is to perform a background removal step, thus avoiding the spurious points generation that is usual in photogrammetric reconstruction. A group of 60 persons were taped with a smartphone, and the corresponding point clouds were obtained automatically with standard photogrammetric methods. We used as a 3D silver standard the clean meshes obtained at the same time with LiDAR sensors post-processed and noise-filtered by expert anthropological biologists. Finally, we used as gold standard anthropometric measurements of the waist and hip of the same people, taken by expert anthropometrists. Applying our method to the raw videos significantly enhanced the quality of the results of the point cloud as compared with the LiDAR-based mesh, and of the anthropometric measurements as compared with the actual hip and waist perimeter measured by the anthropometrists. In both contexts, the resulting quality of body2vec is equivalent to the LiDAR reconstruction.Fil: Trujillo Jiménez, Magda Alexandra. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Navarro, Pablo Eugenio. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentina. Universidad Nacional de la Patagonia "San Juan Bosco"; ArgentinaFil: Pazos, Bruno Alfredo. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; Argentina. Universidad Nacional de la Patagonia "San Juan Bosco"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Morales, Arturo Leonardo. Universidad Nacional de la Patagonia "San Juan Bosco"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentina. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; ArgentinaFil: Ramallo, Virginia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Paschetta, Carolina Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: de Azevedo, Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Ruderman, Anahí. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Perez, Luis Orlando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Delrieux, Claudio Augusto. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; ArgentinaFil: Gonzalez-Jose, Rolando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentin