1,123 research outputs found
Three-dimensional cultured glioma cell lines
Three-dimensional glioma spheroids were produced in vitro with size and histological differentiation previously unattained. The spheroids were grown in liquid media suspension in a Johnson Space Center (JSC) Rotating Wall Bioreactor without using support matrices such as microcarrier beads. Spheroid volumes of greater than 3.5 cu mm and diameters of 2.5 mm were achieved with a viable external layer or rim of proliferating cells, a transitional layer beneath the external layer with histological differentiation, and a degenerative central region with a hypoxic necrotic core. Cell debris was evident in the degenerative central region. The necrotics centers of some of the spheroids had hyaline droplets. Granular bodies were detected predominantly in the necrotic center
Pre-Columbian land use and its modern legacy in the Purus-Madeira Interfluve, Central Amazonia
To combat environmental degradation and change, it is imperative that the rainforests are protected and sustainable land use practices are developed in Amazonia. A better understanding of the role of humans in shaping Amazonian environments and the extent to which the forests have been resilient to anthropogenic disturbance is critical to determining the current state of these ecosystems. This research provides the first reconstruction of late pre-Columbian to early post-Columbian land use and its environmental legacy in the Purus-Madeira Interfluve, Central Amazonia. Soil profile samples were collected across a transect approximately 600 km in length between Manaus and Humaitá, covering a large ecological gradient from dense canopy forests to open canopy forests, as well as dry, upland areas (terra firme) and small riverine settings. Archaeobotanical phytolith and terrestrial palaeoecological samples were analysed from four contexts: (i) primary forests; (ii) oligarchic forests dominated by economically useful trees in the terra firme rainforest on natural soils; (iii) an anthropogenic forest with Brazil nut trees on anthropogenic soil; and (iv) a previously undocumented archaeological site next to the Brazil nut stand. The outcome of this study provides evidence that the extent of the preColumbian environmental impact was larger than previously thought, and this shows that humans managed these forests in various ways to varying intensities. The data, therefore, helps to identify the long-term role of human-environment interactions in Central Amazonia and provides valuable information for future environmental and land use regulation policies
Recommended from our members
Freeform Bioprinting of Liver Encapsulated in Alginate Hydrogels Tissue Constructs for Pharmacokinetic Study
An in vitro model that can be realistically and inexpensively used to predict human response to
various drug administration and toxic chemical exposure is needed. By fabricating a microscale
3D physiological tissue construct consisting of an array of channels and tissue-embedded
chambers, one can selectively develop various biomimicking mammalian tissues for a number of
pharmaceutical applications, for example, experimental pharmaceutical screening for drug
efficacy and toxicity along with apprehending the disposition and metabolic profile of a
candidate drug. This paper addresses issues relating to the development and implementation of a
bioprinting process for freeform fabrication of a 3D cell-encapsulated hydrogel-based tissue
construct, the direct integration onto a microfluidic device for pharmacokinetic study, and the
underlying engineering science for the fabrication of a 3D microscale tissue chamber as well as
its application in pharmacokinetic study. To this end, a prototype 3D microfluidic tissue chamber
embedded with liver cells encapsulated within a hydrogel matrix construct is bioprinted as a
physiological in vitro model for pharmacokinetic study. The developed fabrication processes are
further validated and parameters optimized by assessing cell viability and liver cell phenotype, in
which metabolic and synthetic liver functions are quantitated.Mechanical Engineerin
Hydrofocusing Bioreactor Produces Anti-Cancer Alkaloids
A methodology for growing three-dimensional plant tissue models in a hydrodynamic focusing bioreactor (HFB) has been developed. The methodology is expected to be widely applicable, both on Earth and in outer space, as a means of growing plant cells and aggregates thereof under controlled conditions for diverse purposes, including research on effects of gravitation and other environmental factors upon plant growth and utilization of plant tissue cultures to produce drugs in quantities greater and at costs lower than those of conventional methodologies. The HFB was described in Hydro focus - ing Bioreactor for Three-Dimensional Cell Culture (MSC-22358), NASA Tech Briefs, Vol. 27, No. 3 (March 2003), page 66. To recapitulate: The HFB offers a unique hydrofocusing capability that enables the creation of a low-shear liquid culture environment simultaneously with the herding of suspended cells and tissue assemblies and removal of unwanted air bubbles. The HFB includes a rotating cell-culture vessel with a centrally located sampling port and an internal rotating viscous spinner attached to a rotating base. The vessel and viscous spinner can be made to rotate at the same speed and direction or different speeds and directions to tailor the flow field and the associated hydrodynamic forces in the vessel in order to obtain low-shear suspension of cells and control of the locations of cells and air bubbles. For research and pharmaceutical-production applications, the HFB offers two major benefits: low shear stress, which promotes the assembly of cells into tissue-like three-dimensional constructs; and randomization of gravitational vectors relative to cells, which affects production of medicinal compounds. Presumably, apposition of plant cells in the absence of shear forces promotes cell-cell contacts, cell aggregation, and cell differentiation. Only gentle mixing is necessary for distributing nutrients and oxygen. It has been postulated that inasmuch as cells in the simulated microgravitation of an HFB do not need to maintain the same surface forces as in normal Earth gravitation, they can divert more energy sources to growth and differentiation and, perhaps, to biosynthesis of greater quantities of desired medicinal compounds. Because one can adjust the HFB to vary effective gravitation, one can also test the effects of intermediate levels of gravitation on biosynthesis of various products. The potential utility of this methodology for producing drugs was demonstrated in experiments in which sandalwood and Madagascar periwinkle cells were grown in an HFB. The conditions in the HFB were chosen to induce the cells to form into aggregate cultures that produced anti-cancer indole alkaloids in amounts greater than do comparable numbers of cells of the same species cultured according to previously known methodologies. The observations made in these experiments were interpreted as suggesting that the aggregation of the cells might be responsible for the enhancement of production of alkaloids
Centrifugal adsorption system
A gas-liquid separator uses a helical passageway to impart a spiral motion to a fluid passing therethrough. The centrifugal force generated by the spiraling motion urges the liquid component of the fluid radially outward which forces the gas component radially inward. The gas component is then separated through a gas-permeable, liquid-impervious membrane and discharged through a central passageway. A filter material captures target substances contained in the fluid
Fluid bubble eliminator
A gas-liquid separator uses a helical passageway to impart a spiral motion to a fluid passing therethrough. The centrifugal fore generated by the spiraling motion urges the liquid component of the fluid radially outward which forces the gas component radially inward. The gas component is then filtered through a gas-permeable, liquid-impervious membrane and discharged through a central passageway
Rapid Engineering of Three-Dimensional, Multicellular Tissues With Polymeric Scaffolds
A process has been developed for the rapid tissue engineering of multicellular-tissue-equivalent assemblies by the controlled enzymatic degradation of polymeric beads in a low-fluid-shear bioreactor. In this process, the porous polymeric beads serve as temporary scaffolds to support the assemblies of cells in a tissuelike 3D configuration during the critical initial growth phases of attachment of anchorage-dependent cells, aggregation of the cells, and formation of a 3D extracellular matrix. Once the cells are assembled into a 3D array and enmeshed in a structural supportive 3D extracellular matrix (ECM), the polymeric scaffolds can be degraded in the low-fluid-shear environment of the NASA-designed bioreactor. The natural 3D tissuelike assembly, devoid of any artificial support structure, is maintained in the low-shear bioreactor environment by the newly formed natural cellular/ECM. The elimination of the artificial scaffold allows normal tissue structure and function
MODELING OF MOLECULAR INTERACTIONS: FROM PROTEIN-PROTEIN TO HALOGEN BOND
Part I - Microtubules are polymeric structures formed by the self
association of tubulin dimers. They are extremely dinamical structures, that
can undergo phases of growing and shrinking, playing a key role during cells
proliferation process. Due to its importance for mitosis, tubulin is the target
of many anticancer drugs currently in use or under clinical trial. The success
of these molecules, however, is limited by the onset of resistant tumor cells
during the treatment, so new resistance-proof compounds need to be developed.
We analyze the protein-protein interactions between protofilaments, also known
lateral as interaction, using free energy calculations. We were able to identify
the most important amino acids for tubulin-tubulin binding and to compare this
amino acids with experimental results. The main goal of this study is to
perform an atomistic description of the interactions.
Part II - Halogen bond is an important non-covalent interaction which
is receiving a growing attention in the study of protein-ligand complexes. Many
drugs are halogenated molecules and it has been recently shown that many
halogenated ligand establish halogen bonds with biomolecules. Halogen bond is
established between an halogn atom and a nucleophilic group due to the presence
of a region of positive electrostatic potential, \u3c3-hole. This
nucleophilic group can be an atom with lone pairs, for example N,O or S or it
can be a system of electrons of an aromatic ring. This kind of interaction
is identified as C-X/.
We developed and implented a method to properly evaluate the halogen bond
interaction during a docking simulation using Autodock software.
We also study study the effect of substituents on Ph-X/ systems with DFT
calculations with two different functional. We identified the best substituent
for both rings and compare the results
Method and Apparatus for a Miniature Bioreactor System for Long-Term Cell Culture
A bioreactor and method that permits continuous and simultaneous short, moderate, or long term cell culturing of one or more cell types or tissue in a laminar flow configuration is disclosed, where the bioreactor supports at least two laminar flow zones, which are isolated by laminar flow without the need for physical barriers between the zones. The bioreactors of this invention are ideally suited for studying short, moderate and long term studies of cell cultures and the response of cell cultures to one or more stressors such as pharmaceuticals, hypoxia, pathogens, or any other stressor. The bioreactors of this invention are also ideally suited for short, moderate or long term cell culturing with periodic cell harvesting and/or medium processing for secreted cellular components
Miniature Bioreactor System for Long-Term Cell Culture
A prototype miniature bioreactor system is designed to serve as a laboratory benchtop cell-culturing system that minimizes the need for relatively expensive equipment and reagents and can be operated under computer control, thereby reducing the time and effort required of human investigators and reducing uncertainty in results. The system includes a bioreactor, a fluid-handling subsystem, a chamber wherein the bioreactor is maintained in a controlled atmosphere at a controlled temperature, and associated control subsystems. The system can be used to culture both anchorage-dependent and suspension cells, which can be either prokaryotic or eukaryotic. Cells can be cultured for extended periods of time in this system, and samples of cells can be extracted and analyzed at specified intervals. By integrating this system with one or more microanalytical instrument(s), one can construct a complete automated analytical system that can be tailored to perform one or more of a large variety of assays
- …