Manufacturing and testing of 3D-printed polymer isogrid lattice cylindrical shell structures

This article focuses on the use of fused deposition modeling (FDM) technology to manufacture and test polymer isogrid lattice cylindrical shell (LCS) structures with equilateral triangular unit-cells using non-professional and conventional 3D printing software and hardware. A parametric and automated 3D model for these structures is created in SolidWorks using the Visual Basic (VBA) programming language. Different configurations of the isogrid LCS structure are modeled, manufactured, and tested in order to determine the compressive structural strength and stiffness, as well as to investigate structural instability. The experimental results are used to deduce the inherent limitations of 3D printing, including the inhomogeneities, imperfections, and non-isotropic nature of FDM, as well as the effect of the configurations on local buckling behavior. The results suggest that coupling between local and global buckling has an impact on the compressive stiffness and strength of LCS structures, reducing the accuracy of structural designs neglecting these effects.F71E-503E-DE74 | AD?LIO MANUEL DE SOUSA CAVADASN/

Microstructure and mechanical properties of a microalloyed steel after thermal treatments.

The properties of a microalloyed steel, with Nb and V in its composition, were studied, after different intercritical thermal treatments and at different austenitizing and tempering temperatures. The mechanical properties of the specimens were measured in a Vickers hardness tester, and their microstructures were analyzed by optical microscopy, with the aid of a digital image processor. After austenitizing at 1100 ?C and tempering at 625 ?C, the samples showed significantly higher tempering resistance, reflected by their retention of high hardness, which may be associated with a secondary hardening precipitation of Nb carbon nitrides. In the sample with dualphase microstructure, the martensite volume fraction varied from 18.2 to 26.3% and the ferrite grain size remained unchanged, upon the variation of the time length of the intercritical treatments. Tempered samples showed Vickers hardness (HVN) varying from 327 to 399, and dualphase samples showed HVN from 362 to 429

nutrition and performance in football

Nutrition is an undeniable part of promoting health and performance among football (soccer) players. Nevertheless, nutritional strategies adopted in elite football can vary significantly depending on culture, habit and practical constraints and might not always be supported by scientific evidence. Therefore, a group of 28 Portuguese experts on sports nutrition, sports science and sports medicine sought to discuss current practices in the elite football landscape and review the existing evidence on nutritional strategies to be applied when supporting football players. Starting from understanding football?s physical and physiological demands, five different moments were identified: preparing to play, match-day, recovery after matches, between matches and during injury or rehabilitation periods. When applicable, specificities of nutritional support to young athletes and female players were also addressed. The result is a set of practical recommendations that gathered consensus among involved experts, highlighting carbohydrates periodisation, hydration and conscious use of dietary supplements.D915-7373-ED16 | Cesar LeaoN/

Update on the approach to smoking in patients with respiratory diseases.

Smoking is the leading cause of respiratory disease (RD). The harmful effects of smoking on the respiratory system begin in utero and influence immune responses throughout childhood and adult life. In comparison with ?healthy? smokers, smokers with RD have peculiarities that can impede smoking cessation, such as a higher level of nicotine dependence; nicotine withdrawal; higher levels of exhaled carbon monoxide; low motivation and low self-efficacy; greater concern about weight gain; and a high prevalence of anxiety and depression. In addition, they require more intensive, prolonged treatment. It is always necessary to educate such individuals about the fact that quitting smoking is the only measure that will reduce the progression of RD and improve their quality of life, regardless of the duration and severity of the disease. Physicians should always offer smoking cessation treatment. Outpatient or inpatient smoking cessation treatment should be multidisciplinary, based on behavioral interventions and pharmacotherapy. It will thus be more effective and cost-effective, doubling the chances of success

Canagliflozin and renal outcomes in type 2 diabetes and nephropathy

BACKGROUND Type 2 diabetes mellitus is the leading cause of kidney failure worldwide, but few effective long-term treatments are available. In cardiovascular trials of inhibitors of sodium–glucose cotransporter 2 (SGLT2), exploratory results have suggested that such drugs may improve renal outcomes in patients with type 2 diabetes. METHODS In this double-blind, randomized trial, we assigned patients with type 2 diabetes and albuminuric chronic kidney disease to receive canagliflozin, an oral SGLT2 inhibitor, at a dose of 100 mg daily or placebo. All the patients had an estimated glomerular filtration rate (GFR) of 30 to <90 ml per minute per 1.73 m2 of body-surface area and albuminuria (ratio of albumin [mg] to creatinine [g], >300 to 5000) and were treated with renin–angiotensin system blockade. The primary outcome was a composite of end-stage kidney disease (dialysis, transplantation, or a sustained estimated GFR of <15 ml per minute per 1.73 m2), a doubling of the serum creatinine level, or death from renal or cardiovascular causes. Prespecified secondary outcomes were tested hierarchically. RESULTS The trial was stopped early after a planned interim analysis on the recommendation of the data and safety monitoring committee. At that time, 4401 patients had undergone randomization, with a median follow-up of 2.62 years. The relative risk of the primary outcome was 30% lower in the canagliflozin group than in the placebo group, with event rates of 43.2 and 61.2 per 1000 patient-years, respectively (hazard ratio, 0.70; 95% confidence interval [CI], 0.59 to 0.82; P=0.00001). The relative risk of the renal-specific composite of end-stage kidney disease, a doubling of the creatinine level, or death from renal causes was lower by 34% (hazard ratio, 0.66; 95% CI, 0.53 to 0.81; P<0.001), and the relative risk of end-stage kidney disease was lower by 32% (hazard ratio, 0.68; 95% CI, 0.54 to 0.86; P=0.002). The canagliflozin group also had a lower risk of cardiovascular death, myocardial infarction, or stroke (hazard ratio, 0.80; 95% CI, 0.67 to 0.95; P=0.01) and hospitalization for heart failure (hazard ratio, 0.61; 95% CI, 0.47 to 0.80; P<0.001). There were no significant differences in rates of amputation or fracture. CONCLUSIONS In patients with type 2 diabetes and kidney disease, the risk of kidney failure and cardiovascular events was lower in the canagliflozin group than in the placebo group at a median follow-up of 2.62 years

Partially ordered porous structures on layer-by-layer polyaniline/poly (vinyl sulfate sodium) ultrathin films: easy fabrication of robust submicroscopic patterning.

The use of polyaniline (PANI) as a conductive material has steadily increased in recent years due to its interesting physicochemical properties, low manufacturing cost, and easy processing. This conductive material, associated with the diffraction properties of organized nanostructures in thin films, has excellent application potential in microelectronics and photonic devices. Initially, this work presents improvement routes for the breath figure method (a nanopatterning technique) in polystyrene (PS) films through the control of film deposition parameters and the presence of water in the polymer solution. Such improvements are then extended to the production of PANI nanostructures, in the form of pores, from patterned porous PS films. Consequently, PANI films with a partially ordered pore structure (mean pore diameter of ~100 nm) are produced in a facile and easily scalable method. ? 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 137, 48597

Isolation, molecular characterization and geoprocessing of enteropathogenic, enterotoxigenic, and Shiga toxin-producing Escherichia coli in drinking water sources from southeast Brazil.

In Brazil, safe drinking water is not widely available, and consequently waterborne diseases are still associated with high morbidity and mortality rates. Among waterborne bacteria, diarrheagenic Escherichia coli (DEC) should be highlighted. This study targeted the evaluation of enteropathogenic (EPEC), enterotoxigenic (ETEC), and shiga toxin-producing (STEC)/ enterohemorrhagic Escherichia coli in drinking water in Southeast Brazil and the georeferencing of generated data. A total of 1185 water samples were studied. Among them 7.8% and 4.1% gave positive results for total and fecal coliforms, respectively. By employing PCR, a total of 12 diarrheagenic E. coli (DEC) isolates (6 ETEC, 4 STEC, and 2 EPEC) from eight water samples (4, 2, and 2 positives for STEC, ETEC, and EPEC, respectively) were detected including samples collected in schools and a healthcare facility where particularly susceptible hosts are found. Data generated were submitted to georeferencing. A positive correlation (r 2 = 0.9) between DEC detection and the rainy period was observed. The presence of DEC in drinking water samples in the studied municipalities highlights the relevance of controlling the sources of human and animal fecal pollution, as well as the management of municipal wastewater sources in order to reduce potential risks to human health. Searching for DEC and georeferencing DEC positive sites may subsidize the proposal of corrective and preventive actions by environmental surveillance agencies

Cytotoxicity, anti-poliovirus activity and in silico biological evaluation of constituents from Maytenus gonoclada (Celastraceae).

Objective: The in silico free access web tools PASS online and ChemMapper were used to predict potential biological activities of compounds 1 to 8 isolated from Maytenus gonoclada (Celastraceae). The constituents 4?-O-methylepigalocatequin (6), tingenone (7) and proanthocyanidin A (8), and ethanolic extracts were subjected to in vitro cytotoxicity using VERO cells and anti-Poliovirus assays. Methods: QSAR and molecular superposition, correlating the average number of pharmacophores were used in the prediction studies. Cellular line VERO ATCC CCL-81 was used to determine anti-Poliovirus effect, observed by colorimetric (MTT) method. The annexing V/propidium iodide assay was used to determine the occurrence of apoptosis in the cytotoxicity assays. Results: The experimental results found for constituents 6-8 were in accordance with observed data obtained through PASS online and ChemMapper simulation. Conclusion: Compound 7 showed higher cytotoxic and apoptosis induction properties, and 6 and 8 presented anti-Poliovirus activity