Evaluation of different Ni-semiconductor composites as electrodes for enhanced hydrogen evolution reaction

The use of earth-abundant materials for designing efficient and stable electrocatalysts is of paramount importance to facilitate large-scale production of hydrogen. In this work we developed a new series of electrodes based on Ni-semiconductor composites (Ni|SC) that are easy to synthesize (binder-free, economic and readily scalable method of synthesis), highly stable and active towards electrochemical hydrogen production under alkaline conditions. We showed the direct electrodeposition of composites (Ni|SC) from nickel-Watts plating baths modified by the addition of Nb2O5, Nb3(PO4)5, Bi2O3 and WO3 semiconductor particles. The electrodes were characterized by different techniques (electron and confocal microscopy, X-ray spectroscopy, X-ray diffraction, Raman spectroscopy, among others) before and after their electrochemical evaluation as catalysts for hydrogen evolution from water. In order to gain insights into their structure-activity relationship, the materials were also characterized by means of electrochemical analyses, i.e., cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. All catalysts have onset potential values around -1.1 V vs. SCE and similar Tafel slopes (ca. 120 mV dec-1) corresponding to the Volmer reaction as the rate determining step of the reaction. These catalysts show an increase of up to 115% (for Ni|WO3) of hydrogen production current compared to conventional Ni catalysts, in most cases preserving great chemical and structural stability after short ageing under alkaline conditions. The composite catalysts were synthesized on low-cost nickel-plated stainless-steel supports, which make them excellent alternatives for replacing massive nickel electrodes in conventional alkaline electrolyzers.Fil: Gomez, Melisa Julieta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; Argentina. University of Ottawa; CanadáFil: Benavente Llorente, Victoria. University of Ottawa; Canadá. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Hainer, Andrew. University of Ottawa. Faculty of Science; CanadáFil: Lacconi, Gabriela Ines. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Departamento de Fisicoquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Scaiano, Juan Cesar. University of Ottawa. Faculty of Science; CanadáFil: Franceschini, Esteban Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Departamento de Fisicoquímica; ArgentinaFil: Lanterna, Anabel Estela. University of Ottawa. Faculty of Science; Canadá. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; Argentin

Evaluation of the primary stability in dental implants placed in low density bone with a new drilling technique, Osseodensification:an in vitro study

Primary stability is an important key determinant of implant osseointegration. We investigated approaches to improve primary implant stability using a new drilling technique termed osseodensification (OD), which was compared with the conventional under-drilling (UD) method utilized for low-density bones. We placed 55 conical internal connection implants in each group, in 30 low-density sections of pig tibia. The implants were placed using twist drill bits in both groups; groups Under Drilling (UD) and Osseodensification (OD) included bone sections subjected to conventional UD and OD drilling, respectively. Before placing the implants, we randomized the bone sections that were to receive these implants to avoid sample bias. We evaluated various primary stability parameters, such as implant insertion torque and resonance frequency analysis (RFA) measurements. The results showed that compared with implants placed using the UD technique, those placed using the OD technique were associated with significantly higher primary stability. The mean insertion torque of the implants was 8.87±6.17 Ncm in group 1 (UD) and 21.72±17.14 Ncm in group 2 (OD). The mean RFA was 65.16±7.45 ISQ in group 1 (UD) and 69.75±6.79 ISQ in group 2 (OD). The implant insertion torque and RFA values were significantly higher in OD group than in UD. Therefore, compared with UD, OD improves primary stability in low-density bones (based on torque and RFA measurements)

Calculo del nivel de conciencia utilizando computación paralela

En patologías neurológicas existe un estado conocido como sindorme de “Locked-in” en el cual el paciente tiene conciencia pero es incapaz de comunicarse con el mundo exterior. Este trabajo en progreso, muestra una aplicación innovadora de computación paralela, para optimizar de la implementación del algoritmo de cálculo de conciencia propuesto por Tononi [2]. Describe el algoritmo del cálculo y propone una metodología innovadora para involucrar computación paralela en su implementación.

Calculo del nivel de conciencia utilizando computación paralela

En patologías neurológicas existe un estado conocido como sindorme de “Locked-in” en el cual el paciente tiene conciencia pero es incapaz de comunicarse con el mundo exterior. Este trabajo en progreso, muestra una aplicación innovadora de computación paralela, para optimizar de la implementación del algoritmo de cálculo de conciencia propuesto por Tononi [2]. Describe el algoritmo del cálculo y propone una metodología innovadora para involucrar computación paralela en su implementación.

Optimization of Innovative Three-Dimensionally-Structured Hybrid Vesicles to Improve the Cutaneous Delivery of Clotrimazole for the Treatment of Topical Candidiasis

New three-dimensionally-structured hybrid phospholipid vesicles, able to load clotrimazole in a high amount (10 mg/mL), were obtained for the first time in this work by significantly reducing the amount of water (≤10%), which was replaced with a mixture of glycerol and ethanol (≈90%). A pre-formulation study was carried out to evaluate the effect of both the composition of the hydrating medium and the concentration of the phospholipid on the physico-chemical properties of hybrid vesicles. Four different three-dimensionally-structured hybrid vesicles were selected as ideal systems for the topical application of clotrimazole. An extensive physico-chemical characterization performed using transmission electron microscopy (TEM), cryogenic transmission electron microscopy (cryo-TEM), 31P-NMR, and small-angle X-ray scattering (SAXS) displayed the formation of small, multi-, and unilamellar vesicles very close to each other, and was capable of forming a three-dimensional network, which stabilized the dispersion. Additionally, the dilution of the dispersion with water reduced the interactions between vesicles, leading to the formation of single unilamellar vesicles. The evaluation of the in vitro percutaneous delivery of clotrimazole showed an improved drug deposition in the skin strata provided by the three-dimensionally-structured vesicles with respect to the commercial cream (Canesten®) used as a reference. Hybrid vesicles were highly biocompatible and showed a significant antifungal activity in vitro, greater than the commercial cream Canesten®. The antimycotic efficacy of formulations was confirmed by the reduced proliferation of the yeast cells at the site of infection in vivo. In light of these results, clotrimazole-loaded, three-dimensionally-structured hybrid vesicles appear to be one of the most innovative and promising formulations for the treatment of candidiasis infections