388 research outputs found
Tracking ocean wave spectrum from SAR images
An end to end algorithm for recovery of ocean wave spectral peaks from Synthetic Aperture Radar (SAR) images is described. Current approaches allow precisions of 1 percent in wave number, and 0.6 deg in direction
Searching for keV Sterile Neutrino Dark Matter with X-ray Microcalorimeter Sounding Rockets
High-resolution X-ray spectrometers onboard suborbital sounding rockets can
search for dark matter candidates that produce X-ray lines, such as decaying
keV-scale sterile neutrinos. Even with exposure times and effective areas far
smaller than XMM-Newton and Chandra observations, high-resolution, wide
field-of-view observations with sounding rockets have competitive sensitivity
to decaying sterile neutrinos. We analyze a subset of the 2011 observation by
the X-ray Quantum Calorimeter instrument centered on Galactic coordinates l =
165, b = -5 with an effective exposure of 106 seconds, obtaining a limit on the
sterile neutrino mixing angle of sin^2(2 theta) < 7.2e-10 at 95% CL for a 7 keV
neutrino. Better sensitivity at the level of sin^2(2 theta) ~ 2.1e-11 at 95\%
CL for a 7 keV neutrino is achievable with future 300-second observations of
the galactic center by the Micro-X instrument, providing a definitive test of
the sterile neutrino interpretation of the reported 3.56 keV excess from galaxy
clusters.Comment: 13 pages, 13 figures, submitted to Ap
The fundamental parameters of the roAp star 10 Aql
Due to the strong magnetic field and related abnormal surface layers existing
in rapidly oscillating Ap stars, systematic errors are likely to be present
when determining their effective temperatures, which potentially compromises
asteroseismic studies of these pulsators. Using long-baseline interferometry,
our goal is to determine accurate angular diameters of a number of roAp targets
to provide a temperature calibration for these stars. We obtained
interferometric observations of 10 Aql with the visible spectrograph VEGA at
the CHARA array. We determined a limb-darkened angular diameter of
0.275+/-0.009 mas and deduced a linear radius of 2.32+/-0.09 R_sun. We
estimated the star's bolometric flux and used it, in combination with its
parallax and angular diameter, to determine the star's luminosity and effective
temperature. For two data sets of bolometric flux we derived an effective
temperature of 7800+/-170 K and a luminosity of 18+/-1 L_sun or of 8000+/-210 K
and 19+/-2 L_sun. We used these fundamental parameters together with the large
frequency separation to constrain the mass and the age of 10 Aql, using the
CESAM stellar evolution code. Assuming a solar chemical composition and
ignoring all kinds of diffusion and settling of elements, we obtained a mass of
1.92 M_sun and an age of 780 Gy or a mass of 1.95 M_sun and an age of 740 Gy,
depending on the considered bolometric flux. For the first time, we managed to
determine an accurate angular diameter for a star smaller than 0.3 mas and to
derive its fundamental parameters. In particular, by only combining our
interferometric data and the bolometric flux, we derived an effective
temperature that can be compared to those derived from atmosphere models. Such
fundamental parameters can help for testing the mechanism responsible for the
excitation of the oscillations observed in the magnetic pulsating stars
Fundamental Properties of Cool Stars with Interferometry
We present measurements of fundamental astrophysical properties of nearby,
low-mass, K- and M-dwarfs from our DISCOS survey (DIameterS of COol Stars). The
principal goal of our study is the determination of linear radii and effective
temperatures for these stars. We calculate their radii from angular diameter
measurements using the CHARA Array and Hipparcos distances. Combined with
bolometric flux measurements based on literature photometry, we use our angular
diameter results to calculate their effective surface temperatures. We present
preliminary results established on an assortment of empirical relations to the
stellar effective temperature and radius that are based upon these
measurements. We elaborate on the discrepancy seen between theoretical and
observed stellar radii, previously claimed to be related to stellar activity
and/or metallicity. Our preliminary conclusion, however, is that convection
plays a larger role in the determination of radii of these late-type stars.
Understanding the source of the radius disagreement is likely to impact other
areas of study for low-mass stars, such as the detection and characterization
of extrasolar planets in the habitable zones.Comment: Contribution to Proceedings of Cool Stars 16 Workshop; 8 pages in ASP
format; 9 figure
The fundamental parameters of the roAp star Equulei
Physical processes working in the stellar interiors as well as the evolution
of stars depend on some fundamental stellar properties, such as mass, radius,
luminosity, and chemical abundances. A classical way to test stellar interior
models is to compare the predicted and observed location of a star on
theoretical evolutionary tracks in a H-R diagram. This requires the best
possible determinations of stellar mass, radius, luminosity and abundances. To
derive its fundamental parameters, we observed the well-known rapidly
oscillating Ap star, Equ, using the visible spectro-interferometer
VEGA installed on the optical CHARA array. We computed the calibrated squared
visibility and derived the limb-darkened diameter. We used the whole energy
flux distribution, the parallax and this angular diameter to determine the
luminosity and the effective temperature of the star. We obtained a
limb-darkened angular diameter of 0.564~~0.017~mas and deduced a radius of
~=~2.20~~0.12~. Without considering the multiple
nature of the system, we derived a bolometric flux of erg~cm~s and an effective temperature of
7364~~235~K, which is below the effective temperature that has been
previously determined. Under the same conditions we found a luminosity of
~=~12.8~~1.4~. When the contribution of the closest
companion to the bolometric flux is considered, we found that the effective
temperature and luminosity of the primary star can be, respectively, up to
~100~K and up to ~0.8~L smaller than the values mentioned
above.These new values of the radius and effective temperature should bring
further constraints on the asteroseismic modelling of the star.Comment: Accepted by A&
TC21/RRas2 regulates glycoprotein VI–FcRγ‐mediated platelet activation and thrombus stability
Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/145353/1/jth14197.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/145353/2/jth14197_am.pd
Interferometric radii of bright Kepler stars with the CHARA Array: {\theta} Cygni and 16 Cygni A and B
We present the results of long-baseline optical interferometry observations
using the Precision Astronomical Visual Observations (PAVO) beam combiner at
the Center for High Angular Resolution Astronomy (CHARA) Array to measure the
angular sizes of three bright Kepler stars: {\theta} Cygni, and both components
of the binary system 16 Cygni. Supporting infrared observations were made with
the Michigan Infrared Combiner (MIRC) and Classic beam combiner, also at the
CHARA Array. We find limb-darkened angular diameters of 0.753+/-0.009 mas for
{\theta} Cyg, 0.539+/-0.007 mas for 16 Cyg A and 0.490+/-0.006 mas for 16 Cyg
B. The Kepler Mission has observed these stars with outstanding photometric
precision, revealing the presence of solar-like oscillations. Due to the
brightness of these stars the oscillations have exceptional signal-to-noise,
allowing for detailed study through asteroseismology, and are well constrained
by other observations. We have combined our interferometric diameters with
Hipparcos parallaxes, spectrophotometric bolometric fluxes and the
asteroseismic large frequency separation to measure linear radii ({\theta} Cyg:
1.48+/-0.02 Rsun, 16 Cyg A: 1.22+/-0.02 Rsun, 16 Cyg B: 1.12+/-0.02 Rsun),
effective temperatures ({\theta} Cyg: 6749+/-44 K, 16 Cyg A: 5839+/-42 K, 16
Cyg B: 5809+/-39 K), and masses ({\theta} Cyg: 1.37+/-0.04 Msun, 16 Cyg A:
1.07+/-0.05 Msun, 16 Cyg B: 1.05+/-0.04 Msun) for each star with very little
model dependence. The measurements presented here will provide strong
constraints for future stellar modelling efforts.Comment: 9 pages, 4 figures, and 5 tables, accepted for publication in Monthly
Notices of the Royal Astronomical Societ
Toward Direct Detection of Hot Jupiters with Precision Closure Phase: Calibration Studies and First Results from the CHARA Array
Direct detection of thermal emission from nearby hot Jupiters has greatly
advanced our knowledge of extrasolar planets in recent years. Since hot Jupiter
systems can be regarded as analogs of high contrast binaries, ground-based
infrared long baseline interferometers have the potential to resolve them and
detect their thermal emission with precision closure phase - a method that is
immune to the systematic errors induced by the Earth's atmosphere. In this
work, we present closure phase studies toward direct detection of nearby hot
Jupiters using the CHARA interferometer array outfitted with the MIRC
instrument. We carry out closure phase simulations and conduct a large number
of observations for the best candidate {\upsion} And. Our experiments suggest
the method is feasible with highly stable and precise closure phases. However,
we also find much larger systematic errors than expected in the observations,
most likely caused by dispersion across different wavelengths. We find that
using higher spectral resolution modes (e.g., R=150) can significantly reduce
the systematics. By combining all calibrators in an observing run together, we
are able to roughly recalibrate the lower spectral resolution data, allowing us
to obtain upper limits of the star-planet contrast ratios of {\upsion} And b
across the H band. The data also allow us to get a refined stellar radius of
1.625\pm0.011 R\odot. Our best upper limit corresponds to a contrast ratio of
2.1\times10^3:1 with 90% confidence level at 1.52{\mu}m, suggesting that we are
starting to have the capability of constraining atmospheric models of hot
Jupiters with interferometry. With recent and upcoming improvements of
CHARA/MIRC, the prospect of detecting emission from hot Jupiters with closure
phases is promising.Comment: 30 pages, including 9 figures and 4 tables. Published in PASP in
August 201
Time, spatial, and spectral resolution of the Halpha line-formation region of Deneb and Rigel with the VEGA/CHARA interferometer
BA-type supergiants are amongst the most optically-bright stars. They are
observable in extragalactic environments, hence potential accurate distance
indicators. Emission activity in the Halpha line of the BA supergiants Rigel
(B8Ia) and Deneb (A2Ia) is indicative of presence of localized time-dependent
mass ejections. Here, we employ optical interferometry to study the Halpha
line-formation region in these stellar environments. High spatial- (0.001
arcsec) and spectral- (R=30 000) resolution observations of Halpha were
obtained with the visible recombiner VEGA installed on the CHARA
interferometer, using the S1S2 array-baseline (34m). Six independent
observations were done on Deneb over the years 2008 and 2009, and two on Rigel
in 2009. We analyze this dataset with the 1D non-LTE radiative-transfer code
CMFGEN, and assess the impact of the wind on the visible and near-IR
interferometric signatures, using both Balmer-line and continuum photons. We
observe a visibility decrease in Halpha for both Rigel and Deneb, suggesting
that the line-formation region is extended (1.5-1.75 R*). We observe a
significant visibility decrease for Deneb in the SiII6371 line. We witness time
variations in the differential phase for Deneb, implying an inhomogeneous and
unsteady circumstellar environment, while no such variability is seen in
differential visibilities. Radiative-transfer modeling of Deneb, with allowance
for stellar-wind mass loss, accounts fairly well for the observed decrease in
the Halpha visibility. Based on the observed differential visibilities, we
estimate that the mass-loss rate of Deneb has changed by less than 5%
- …