Agency Theory Issues in the Food Processing Industry

The objective is to identify significant determinants of performance for food processing firms over the 1992 to 2003 time period, focusing particularly on the issue of family control. Variables measuring firm effects such as asset size, governance, income distribution, and risk are used to explain return on equity. This study builds upon previous research by including a measure of income distribution in the food processing industry. Governance variables are found to be significant determinants of return on equity. The results found no evidence of agency problems in family-controlled firms during this time period.agribusiness, institutional economics, organizational economics, Agribusiness, Food Consumption/Nutrition/Food Safety, Production Economics, D23, G34, Q13, Q14,

Process Sensitivity, Performance, and Direct Verification Testing of Adhesive Locking Features

Phase I: The use of adhesive locking features or liquid locking compounds (LLCs) (e.g., Loctite) as a means of providing a secondary locking feature has been used on NASA programs since the Apollo program. In many cases Loctite was used as a last resort when (a) self-locking fasteners were no longer functioning per their respective drawing specification, (b) access was limited for removal & replacement, or (c) replacement could not be accomplished without severe impact to schedule. Long-term use of Loctite became inevitable in cases where removal and replacement of worn hardware was not cost effective and Loctite was assumed to be fully cured and working. The NASA Engineering & Safety Center (NESC) and United Space Alliance (USA) recognized the need for more extensive testing of Loctite grades to better understand their capabilities and limitations as a secondary locking feature. These tests, identified as Phase I, were designed to identify processing sensitivities, to determine proper cure time, the correct primer to use on aerospace nutplate, insert and bolt materials such as A286 and MP35N, and the minimum amount of Loctite that is required to achieve optimum breakaway torque values. The .1900-32 was the fastener size tested, due to wide usage in the aerospace industry. Three different grades of Loctite were tested. Results indicate that, with proper controls, adhesive locking features can be successfully used in the repair of locking features and should be considered for design. Phase II: Threaded fastening systems used in aerospace programs typically have a requirement for a redundant locking feature. The primary locking method is the fastener preload and the traditional redundant locking feature is a self-locking mechanical device that may include deformed threads, non-metallic inserts, split beam features, or other methods that impede movement between threaded members. The self-locking resistance of traditional locking features can be directly verified during assembly by measuring the dynamic prevailing torque. Adhesive locking features or LLCs are another method of providing redundant locking, but a direct verification method has not been used in aerospace applications to verify proper installation when using LLCs because of concern for damage to the adhesive bond. The reliability of LLCs has also been questioned due to failures observed during testing with coupons for process verification, although the coupon failures have often been attributed to a lack of proper procedures. It is highly desirable to have a direct method of verifying the LLC cure or bond integrity. The purpose of the Phase II test program was to determine if the torque applied during direct verification of an adhesive locking feature degrades that locking feature. This report documents the test program used to investigate the viability of such a direct verification method. Results of the Phase II testing were positive, and additional investigation of direct verification of adhesive locking features is merited

Research and education in management of large-scale technical programs

A research effort is reported which was conducted by NASA in conjunction with Drexel University, and which was aimed at an improved understanding of large scale systems technology and management

Cosmic-Ray Positrons: Are There Primary Sources?

Cosmic rays at the Earth include a secondary component originating in collisions of primary particles with the diffuse interstellar gas. The secondary cosmic rays are relatively rare but carry important information on the Galactic propagation of the primary particles. The secondary component includes a small fraction of antimatter particles, positrons and antiprotons. In addition, positrons and antiprotons may also come from unusual sources and possibly provide insight into new physics. For instance, the annihilation of heavy supersymmetric dark matter particles within the Galactic halo could lead to positrons or antiprotons with distinctive energy signatures. With the High-Energy Antimatter Telescope (HEAT) balloon-borne instrument, we have measured the abundances of positrons and electrons at energies between 1 and 50 GeV. The data suggest that indeed a small additional antimatter component may be present that cannot be explained by a purely secondary production mechanism. Here we describe the signature of the effect and discuss its possible origin.Comment: 15 pages, Latex, epsfig and aasms4 macros required, to appear in Astroparticle Physics (1999

Gender-related differences in infrarenal aortic aneurysm morphologic features: Issues relevant to Ancure and Talent endografts

AbstractPurpose: The purpose of this study was to determine whether gender-related anatomic variables may reduce applicability of aortic endografting in women. Methods: Data on all patients evaluated at our institution for endovascular repair of their abdominal aortic aneurysm were collected prospectively. Ancure (Endovascular Technologies (EVT)/Guidant Corporation, Menlo Park, Calif) and Talent (World Medical/Medtronic Corporation, Sunrise, Fla) endografts were used. Preoperative imaging included contrast-enhanced computed tomography and arteriography or magnetic resonance angiography. Results: One hundred forty-one patients were evaluated (April 1998–December 1999), 19 women (13.5%) and 122 men (86.5%). Unsuitable anatomy resulted in rejection of 63.2% of the women versus only 33.6% of the men (P = .026). Maximum aneurysm diameter in women and men were similar (women, 56.94 ± 8.23 mm; men, 59.29 ± 13.22 mm; P = .5). The incidence of iliac artery tortuosity was similar across gender (women, 36.8%; men, 54.9%; P = .2). The narrowest diameter of the larger external iliac artery in women was significantly smaller (7.29 ± 2.37 mm) than in men (8.62 ± 2.07 mm; P = .02). The proximal neck length was significantly shorter in women (10.79 ± 12.5 mm) than in men (20.47 ± 19.5 mm; P = .02). The proximal neck width was significantly wider in women (30.5 ± 2.4 mm) than in men (27.5 ± 2.5 mm; P = .013). Proximal neck angulation (>60 degrees) was seen in a significantly higher proportion of women (21%) than men (3.3%; P = .012). Of the patients accepted for endografting, a significantly higher proportion of women required an iliofemoral conduit for access (women, 28.6%; men, 1.2%; P = .016). Conclusion: Gender-related differences in infrarenal aortic aneurysm morphologic features may preclude widespread applicability of aortic endografting in women, as seen by our experience with the Ancure and Talent devices. In addition to a significantly reduced iliac artery size, women are more likely to have a shorter, more dilated, more angulated proximal aortic neck. (J Vasc Surg 2001;33:S77-84.

EWPD Constraints on Flavor Symmetric Vector Fields

Electroweak precision data constraints on flavor symmetric vector fields are determined. The flavor multiplets of spin one that we examine are the complete set of fields that couple to quark bi-linears at tree level while not initially breaking the quark global flavor symmetry group. Flavor safe vector masses proximate to, and in some cases below, the electroweak symmetry breaking scale are found to be allowed. Many of these fields provide a flavor safe mechanism to explain the t tbar forward backward anomaly, and can simultaneously significantly raise the allowed values of the Standard Model Higgs mass consistent with electroweak precision data.Comment: Matches version published in JHE

Evaluation of an emergency department lean process improvement program to reduce length of stay

Study objective In recent years, lean principles have been applied to improve wait times in the emergency department (ED). In 2009, an ED process improvement program based on lean methods was introduced in Ontario as part of a broad strategy to reduce ED length of stay and improve patient flow. This study seeks to determine the effect of this program on ED wait times and quality of care. Methods We conducted a retrospective cohort study of all ED visits at program and control sites during 3 program waves from April 1, 2007, to June 30, 2011, in Ontario, Canada. Time series analyses of outcomes before and after the program and difference-in-differences analyses comparing changes in program sites with control sites were conducted. Results In before-after models among program sites alone, 90th percentile ED length of stay did not change in wave 1 (–14 minutes [95% confidence interval {CI} –47 to 20]) but decreased after wave 2 (–87 [95% CI –108 to –66]) and wave 3 (–33 [95% CI –50 to –17]); median ED length of stay decreased after wave 1 (–18 [95% CI –24 to –12]), wave 2 (–23 [95% CI –27 to –19]), and wave 3 (–15 [95% CI –18 to –12]). In all waves, decreases were observed in time to physician assessment, left-without-being-seen rates, and 72-hour ED revisit rates. In the difference-in-difference models, in which changes in program sites were compared with controls, the program was associated with no change in 90th percentile ED length of stay in wave 2 (17 [95% CI –0.2 to 33]) and increases in wave 1 (23 [95% CI 0.9 to 45]) and wave 3 (31 [95% CI 10 to 51]), modest reductions in median ED length of stay in waves 2 and 3 alone, and a decrease in time to physician assessment in wave 3 alone. Conclusion Although the program reduced ED waiting times, it appeared that its benefits were diminished or disappeared when compared with that of control sites, which were exposed to system-wide initiatives such as public reporting and pay for performance. This study suggests that further evaluation of the effectiveness of lean methods in the ED is warranted before widespread implementation