4,473 research outputs found

    Multimode interference devices for focusing in microfluidic channels

    No full text
    Low-cost, compact, automated optical microsystems for chemical analysis, such as microflow cytometers for identification of individual biological cells, require monolithically integrated microlenses for focusing in microfluidic channels, to enable high-resolution scattering and fluorescence measurements. The multimode interference device (MMI), which makes use of self-imaging in multimode waveguides, is shown to be a simple and effective alternative to the microlens for microflow cytometry. The MMIs have been designed, realized, and integrated with microfluidic channels in a silica-based glass waveguide material system. Focal spot sizes of 2.4 µm for MMIs have been measured at foci as far as 43.7 µm into the microfluidic channel

    Electrostatic Patch Effect in Cylindrical Geometry. I. Potential and Energy between Slightly Non-Coaxial Cylinders

    Full text link
    We study the effect of any uneven voltage distribution on two close cylindrical conductors with parallel axes that are slightly shifted in the radial and by any length in the axial direction. The investigation is especially motivated by certain precision measurements, such as the Satellite Test of the Equivalence Principle (STEP). By energy conservation, the force can be found as the energy gradient in the vector of the shift, which requires determining potential distribution and energy in the gap. The boundary value problem for the potential is solved, and energy is thus found to the second order in the small transverse shift, and to lowest order in the gap to cylinder radius ratio. The energy consists of three parts: the usual capacitor part due to the uniform potential difference, the one coming from the interaction between the voltage patches and the uniform voltage difference, and the energy of patch interaction, entirely independent of the uniform voltage. Patch effect forces and torques in the cylindrical configuration are derived and analyzed in the next two parts of this work.Comment: 26 pages, 1 Figure. Submitted to Classical and Quantum Gravit

    Bioconversion of potatoes residues or surplus potatoes to ethanol under non axenic conditions [abstract]

    Get PDF
    Biofuels can offer an alternative to fossil fuels in the context of climate change and fossil reserves depletion. With 3 million tons of potatoes produced in 2007 and a high yield per hectare of 47 tons, Belgium is the 19th largest producer in the world. The residual and surplus potatoes could be used to produce bioethanol by fermentation. We examined the feasibility of a simple ethanol fermentation process under non axenic conditions. The substrate was pretreated with commercial amylases or by adding as low as 10% FM (Fresh Matter) barley malt. It was then fermented with Saccharomyces cerevisiae. Ethanol and volatile fatty acids were analyzed by GC-FID and soluble sugars were analyzed with the Anthrone method. Starch from potatoes was hydrolyzed to soluble sugars. Hydrolysis seems to continue with 10% FM of barley malt after 48 h while the hydrolysis stopped or decelerated with commercial enzymes. With 10% FM of malt, 3 h of hydrolysis and 7 days of fermentation, an ethanol concentration of 42 g.l-1 was obtained and the conversion yield was 139 gethanol.kg-1 DM. The fermentation conversion yield of soluble sugars to ethanol was > 82% and the endogenous competition was limited. However, starch hydrolyzing seems to be a limiting step under the conditions tested. Commercial enzymes did not provide better results under the same conditions

    Lidar measurements and Umkehr observations of the ozone vertical distribution at the Observatoire de Haute Provence

    Get PDF
    This paper compares results of lidar and Umkehr measurements, made during 1985-1991, which include 110 coincidences. The Umkehr ozone profiles were retrieved using the conventional Umkehr method (Gotz et al., 1934; Mateer and Dutsch, 1964), the short Umkehr method (De Luisi, 1979), and the recently developed new-conventional Umkehr method (Mateer and De Luisi, 1992) in which the conventional method is referred to as the '1964 algorithm' and the new-conventional method as the '1991 algorithm'. Results obtained show good agreement between the ozone profiles derived using the new-conventional Umkehr method and lidar ozone profiles, emphasizing the influence of the temperature dependence of the ozone cross-sections on the Umkehr ozone retrievals

    Gully Formation at the Haughton Impact Structure (Arctic Canada) Through the Melting of Snow and Ground Ice, with Implications for Gully Formation on Mars

    Get PDF
    The formation of gullies on Mars has been the topic of active debate and scientific study since their first discovery by Malin and Edgett in 2000. Several mechanisms have been proposed to account for gully formation on Mars, from dry mass movement processes, release of water or brine from subsurface aquifers, and the melting of near-surface ground ice or snowpacks. In their global documentation of martian gullies, report that gullies are confined to ~2783S and ~2872N latitudes and span all longitudes. Gullies on Mars have been documented on impact crater walls and central uplifts, isolated massifs, and on canyon walls, with crater walls being the most common situation. In order to better understand gully formation on Mars, we have been conducting field studies in the Canadian High Arctic over the past several summers, most recently in summer 2018 and 2019 under the auspices of the Canadian Space Agency-funded Icy Mars Analogue Program. It is notable that the majority of previous studies in the Arctic and Antarctica, including our recent work on Devon Island, have focused on gullies formed on slopes generated by regular endogenic geological processes and in regular bedrock. How-ever, as noted above, meteorite impact craters are the most dominant setting for gullies on Mars. Impact craters provide an environment with diverse lithologies including impact-generated and impact-modified rocks and slope angle, and thus greatly variable hill slope processes could occur within a localized area. Here, we investigate the formation of gullies within the Haughton impact structure and compare them to gullies formed in unimpacted target rock in the nearby Thomas Lee Inle

    Ozone and temperature trends

    Get PDF
    An update of the extensive reviews of the state of knowledge of measured ozone trends published in the Report of the International Ozone Trends Panel is presented. The update contains a review of progress since these reports, including reviewing of the ozone records, in most cases through March 1991. Also included are some new, unpublished reanalyses of these records including a complete reevaluation of 29 stations located in the former Soviet Union. The major new advance in knowledge of the measured ozone trend is the existence of independently calibrated satellite data records from the Total Ozone Mapping Spectrometer (TOMS) and Stratospheric Aerosol and Gas Experiment (SAG) instruments. These confirm many of the findings, originally derived from the Dobson record, concerning northern mid-latitude changes in ozone. We now have results from several instruments, whereas the previously reported changes were dependent on the calibration of a single instrument. This update will compare the ozone records from many different instruments to determine whether or not they provide a consistent picture of the ozone change that has occurred in the atmosphere. The update also briefly considers the problem of stratospheric temperature change. As in previous reports, this problem received significantly less attention, and the report is not nearly as complete. This area needs more attention in the future

    Atmospheric neutron measurements with the SONTRAC science model

    Get PDF
    –The SOlar Neutron TRACking (SONTRAC) telescope was originally developed to measure the energy spectrum and incident direction of neutrons produced in solar flares, in the energy range 20 - 250 MeV. While developed primarily for solar physics, the SONTRAC detector may be employed in virtually any application requiring both energy measurement and imaging capabilities. The SONTRAC Science Model (SM) is presently being operated at the University of New Hampshire (UNH) as a ground-based instrument to investigate the energy spectrum, zenith and azimuth angle dependence of the cosmic-ray induced sea-level atmospheric neutron flux. SONTRAC measurements are based on the non-relativistic double scatter of neutrons off ambient protons within a block of scintillating fibers. Using the n-p elastic double-scatter technique, it is possible to uniquely determine the neutron’s energy and direction on an event-by-event basis. The 3D SM consists of a cube of orthogonal plastic scintillating fiber layers with 5 cm sides, read out by two CCD cameras. Two orthogonal imaging chains allow full 3D reconstruction of scattered proton tracks

    L008 Défaut de différenciation veino-lymphatique embyonnaire par modulation de l’ARN interférence

    Get PDF
    L’ARN interférence, mécanisme de régulation de l’expression des gènes, est médiée par les siARNs et les microARNs, ARN non-codants de 20 à 22 nucléotides affectant la régulation post-transcriptionnelle d’ARNm cibles avec lesquels ils s’apparient.La RNase DICER est une enzyme centrale de la biosynthèse des siARNs et microARNs. Les souris dont le gène dicer est invalidé ont un phénotype complexe, et meurent très tôt pendant le développement, notamment à cause d’un défaut d’angiogenèse.Afin d’étudier l’ARN interférence au cours de l’angiogenèse embryonnaire, des souris dont le gène dicer est floxé (mutant conditionnel) sont croisées avec des souris exprimant la recombinase Cre, de manière constitutive, sous le contrôle du promoteur du gène tie2, dirigeant ainsi son expression dans les cellules endothéliales (CE) et les cellules hématopiétiques.Nos résultats montrent que l’invalidation de dicer sous le contrôle du promoteur du gène tie2 entraine une mortalité embryonnaire suite à un œdème et des hémorragies au treizième jour du développement (E13,5). L’analyse histologique montre des vaisseaux lymphatiques remplis de sang, suggérant une mauvaise séparation du réseau sanguin et lymphatique. Cette hypothèse est étudiée par marquage des vaisseaux lymphatiques (LYVE-1) et des vaisseaux sanguins (PECAM) sur embryon entier et peaux isolées à différents stades précédant la mort.Ces embryons présentent également un problème de développement du foie, probablement dû à l’activité du promoteur tie2 dans les lignées hématopoiétiques. La mise en culture de ces foies fœtaux à E13,5 révèle une atteinte des précurseurs hématopoétiques.L’étude de ces précurseurs à des stades plus précoces (E8,5) est en cours au laboratoire.Nos résultats démontrent donc un rôle important de l’ARN interférence dans le contrôle épigénétique de l’angiogenèse et de la lymphangiogenèse embryonnaire mais également dans le développement de l’hématopoièse, suggérant son implication dans la différenciation veino-lymphangiogenèse, dont les mécanismes moléculaires seront discutés

    Solar H2_2 evolution in water with modified diketopyrrolopyrrole dyes immobilised on molecular Co and Ni catalyst–TiO2_2 hybrids

    Get PDF
    A series of diketopyrrolopyrrole (DPP) dyes with a terminal phosphonic acid group for attachment to metal oxide surfaces were synthesised and the effect of side chain modification on their properties investigated. The organic photosensitisers feature strong visible light absorption (λ\lambda = 400 to 575 nm) and electrochemical and fluorescence studies revealed that the excited state of all dyes provides sufficient driving force for electron injection into the TiO2_2 conduction band. The performance of the DPP chromophores attached to TiO2_2 nanoparticles for photocatalytic H2_2 evolution with co-immobilised molecular Co and Ni catalysts was subsequently studied, resulting in solar fuel generation with a dye-sensitised semiconductor nanoparticle system suspended in water without precious metal components. The performance of the DPP dyes in photocatalysis did not only depend on electronic parameters, but also on properties of the side chain such as polarity, steric hinderance and hydrophobicity as well as the specific experimental conditions and the nature of the sacrificial electron donor. In an aqueous pH 4.5 ascorbic acid solution with a phosphonated DuBois-type Ni catalyst, a DPP-based turnover number (TONDPP_{DPP}) of up to 205 was obtained during UV-free simulated solar light irradiation (100 mW cm2^{-2} , AM 1.5G, λ\lambda > 420 nm) after 1 day. DPP-sensitised TiO2_2 nanoparticles were also successfully used in combination with a hydrogenase or platinum instead of the synthetic H2_2 evolution catalysts and the platinum-based system achieved a TONDPP_{DPP} of up to 2660, which significantly outperforms an analogous system using a phosphonated Ru tris(bipyridine) dye (TONRu_{Ru} = 431). Finally, transient absorption spectroscopy was performed to study interfacial recombination and dye regeneration kinetics revealing that the different performances of the DPP dyes are most likely dictated by the different regeneration efficiencies of the oxidised chromophores.Support by the Christian Doppler Research Association (Austrian Federal Ministry of Science, Research and Economy and National Foundation for Research, Technology and Development), the OMV Group and the Ministry of Education (Singapore) is gratefully acknowledged. RG is grateful to FRQNT for a Postdoctoral Fellowship and JRD thanks the European Science Foundation project Intersolar (291482) for support
    corecore