1,428 research outputs found
Task III Report: Water Use Estimation and Forecasting for the Kentucky River Basin
We estimate aggregate monthly water use for summer, peak demand and nonsummer off-peak demand periods for the Kentucky River Basin. Using Kentucky Division of Water use data, U.S. Census data for county demographic and economic conditions, and U.S. Weather Service data for weather conditions we estimate use for the 1970-1993 period. Our model allows for idiosyncratic effects of each of the 27 counties in the sample. We find factors such as population and manufacturing employment affect use and temperature and rainfall in current and preceding months effect use during the summer, peak period. The model predicts well within the sample period. Population forecasts, both moderate and high growth series, from the Kentucky Data Center are used along with manufacturing employment forecasts for water use forecasts. Water use forecasts are made for years out to 2020 under 1930 drought conditions for comparison with water supply estimates. The use estimates are made assuming pricing and other demand estimate policies remain constant. For Pool 9 under 1930 weather conditions and high (moderate) population growth, water use is forecast to be 70 (55) MGD which is 220 gallons per person per day. For the Basin aggregate water use is forecast to be 129 (110) MGD. An Excel 5.0 spreadsheet was developed to make forecasts for various assumptions concerning: population, growth, and employment the degree to which new users come on line to water and sewer systems, and weather conditions
Artificial turf: chemical flux and development of silicone wristband partitioning coefficients
This work uses passive samplers to identify PAHs and OPAHs not previously associated with artificial turf, and to provide the first quantitative measure of in situ flux of semi-volatile contaminants on artificial turf fields. Both air (1.5-m height) and turf air (immediately above turf surface) were sampled using two sampling materials: low-density polyethylene and silicone. Utilizing a broad targeted screen, we assess both artificial turf and samples of crumb rubber for over 1530 chemicals including pesticides, phthalates, and personal care products. We report the presence of 25 chemicals that have not yet been reported in artificial turf literature, including some with known human effects. The samplers were also quantitatively analyzed for polycyclic aromatic hydrocarbons yielding gas-phase concentrations at breathing height and surface level—the first such report on an artificial turf outdoor field. Turf pore-air and air chemicals were highly correlated at all sites, and particularly at the recently installed indoor site. Flux of chemicals between air and turf surface appear to follow field age although more research is needed to confirm this trend. The thermal extraction process and silicone passive samplers used are suitable for larger-scale environmental sampling campaigns that aim for less solvent and sample processing. By co-deploying silicone passive samplers and conventional low-density polyethylene, partitioning coefficients are derived that can be used for future silicone passive air sampling environmental assessment. This study provides an initial demonstration that passive samplers can be used to quantify volatile and semi-volatile organic chemicals from artificial turf.publishedVersio
Winter 1993 observations of oceanography and sediment transport at the LEO-15 site
The NOAA National Underseas Research Program at Rutgers University is establishing a Long-term Ecosystem
Observatory off New Jersey in 15 meters of water. As part of a bottom boundary layer study at this site, WHOI deployed a bottom
instrument frame during the winter of 1993-94. The bottom instrument carried a current meter, a vertical array of optical
back scattering sensors, temperature, pressure and conductivity sensors and an Acoustical Backscattering Sensor. The deployment
was partially successful as the acoustic system failed. The other instrumentation worked well for 3 weeks returning data on winter
conditions at the site. The extreme winter waves ended the experiment by tipping the instrument over on its side. The optical
instrumentation was calibrated with sediment from the site, and the results from the experiment presented.Funding was provided by the National Oceanic and Atmospheric Administration through Contract No. 4-25020 to Rutgers/SUNY National Underseas Research Program
Evaluating the Waterfowl Breeding Population and Habitat Survey for Scaup
Potential bias in breeding population estimates of certain duck species from the Waterfowl Breeding Population and Habitat Survey (WBPHS) has been a concern for decades. The WBPHS does not differentiate between lesser (Aythya affinis) and greater (A. marila) scaup, but lesser scaup comprise 89% of the combined scaup population and their population estimates are suspected to be biased. We marked female lesser scaup (i.e., marked scaup) in the Mississippi and Atlantic Flyways, Canada and United States, with implantable satellite transmitters to track their spring migration through the traditional and eastern survey areas of the WBPHS, 2005–2010. Our goal was to use data independent of the WBPHS to evaluate whether breeding population estimates for scaup were biased and identify variables that might be used in the future to refine population estimates. We found that the WBPHS estimates of breeding scaup are biased because, across years, only 30% of our marked scaup had settled for the breeding period when the strata in which they settled were surveyed, 43% were available to be counted in multiple survey strata as their migration continued during the WBPHS, 32% settled outside the WBPHS area, the number of times a marked scaup was available to be counted by survey crews varied positively with the latitude that a marked scaup settled on breeding areas, the probability of a marked scaup being in a stratum while it was surveyed varied among years, and these probabilities were positively correlated with the traditional and eastern breeding population estimates for scaup. Annual population estimates derived from banding data provide a less biased and preferable method of monitoring scaup population status and trend. Development of models that include metrics such as survey stratum latitude and annual spring environmental conditions might potentially be used to improve scaup breeding population estimates derived from the WBPHS, but independent estimates from banding data would be important to evaluate such models
Hydrofocusing Bioreactor for Three-Dimensional Cell Culture
The hydrodynamic focusing bioreactor (HFB) is a bioreactor system designed for three-dimensional cell culture and tissue-engineering investigations on orbiting spacecraft and in laboratories on Earth. The HFB offers a unique hydrofocusing capability that enables the creation of a low-shear culture environment simultaneously with the "herding" of suspended cells, tissue assemblies, and air bubbles. Under development for use in the Biotechnology Facility on the International Space Station, the HFB has successfully grown large three-dimensional, tissuelike assemblies from anchorage-dependent cells and grown suspension hybridoma cells to high densities. The HFB, based on the principle of hydrodynamic focusing, provides the capability to control the movement of air bubbles and removes them from the bioreactor without degrading the low-shear culture environment or the suspended three-dimensional tissue assemblies. The HFB also provides unparalleled control over the locations of cells and tissues within its bioreactor vessel during operation and sampling
NASA Light Emitting Diode Medical Applications from Deep Space to Deep Sea
This work is supported and managed through the NASA Marshall Space Flight Center-SBIR Program. LED-technology developed for NASA plant growth experiments in space shows promise for delivering light deep into tissues of the body to promote wound healing and human tissue growth. We present the results of LED-treatment of cells grown in culture and the effects of LEDs on patients’ chronic and acute wounds. LED-technology is also biologically optimal for photodynamic therapy of cancer and we discuss our successes using LEDs in conjunction with light-activated chemotherapeutic drugs
The AzTEC mm-Wavelength Camera
AzTEC is a mm-wavelength bolometric camera utilizing 144 silicon nitride
micromesh detectors. Herein we describe the AzTEC instrument architecture and
its use as an astronomical instrument. We report on several performance metrics
measured during a three month observing campaign at the James Clerk Maxwell
Telescope, and conclude with our plans for AzTEC as a facility instrument on
the Large Millimeter Telescope.Comment: 13 pages, 15 figures, accepted for publication in Monthly Notice
Identification of a Novel Staphylococcus aureus Two-Component Leukotoxin Using Cell Surface Proteomics
Staphylococcus aureus is a prominent human pathogen and leading
cause of bacterial infection in hospitals and the community.
Community-associated methicillin-resistant S. aureus (CA-MRSA)
strains such as USA300 are highly virulent and, unlike hospital strains, often
cause disease in otherwise healthy individuals. The enhanced virulence of
CA-MRSA is based in part on increased ability to produce high levels of secreted
molecules that facilitate evasion of the innate immune response. Although
progress has been made, the factors that contribute to CA-MRSA virulence are
incompletely defined. We analyzed the cell surface proteome (surfome) of USA300
strain LAC to better understand extracellular factors that contribute to the
enhanced virulence phenotype. A total of 113 identified proteins were associated
with the surface of USA300 during the late-exponential phase of growth
in vitro. Protein A was the most abundant surface molecule
of USA300, as indicated by combined Mascot score following analysis of peptides
by tandem mass spectrometry. Unexpectedly, we identified a previously
uncharacterized two-component leukotoxin–herein named LukS-H and
LukF-G (LukGH)-as two of the most abundant surface-associated proteins of
USA300. Rabbit antibody specific for LukG indicated it was also freely secreted
by USA300 into culture media. We used wild-type and isogenic
lukGH deletion strains of USA300 in combination with human
PMN pore formation and lysis assays to identify this molecule as a leukotoxin.
Moreover, LukGH synergized with PVL to enhance lysis of human PMNs in
vitro, and contributed to lysis of PMNs after phagocytosis. We
conclude LukGH is a novel two-component leukotoxin with cytolytic activity
toward neutrophils, and thus potentially contributes to S.
aureus virulence
- …