Screw dynamo in a time-dependent pipe flow

The kinematic dynamo problem is investigated for the flow of a conducting fluid in a cylindrical, periodic tube with conducting walls. The methods used are an eigenvalue analysis of the steady regime, and the three-dimensional solution of the time-dependent induction equation. The configuration and parameters considered here are close to those of a dynamo experiment planned in Perm, which will use a torus-shaped channel. We find growth of an initial magnetic field by more than 3 orders of magnitude. Marked field growth can be obtained if the braking time is less than 0.2 s and only one diverter is used in the channel. The structure of the seed field has a strong impact on the field amplification factor. The generation properties can be improved by adding ferromagnetic particles to the fluid in order to increase its relative permeability,but this will not be necessary for the success of the dynamo experiment. For higher magnetic Reynolds numbers, the nontrivial evolution of different magnetic modes limits the value of simple `optimistic' and `pessimistic' estimates.Comment: 10 pages, 12 figure

Methane Flux in Cropland and Adjacent Riparian Buff ers with Different Vegetation Covers

While water quality functions of conservation buffers established adjacent to cropped fields have been widely documented, the relative contribution of these re-established perennial plant systems to greenhouse gases has not been completely documented. In the case of methane (CH(4)), these systems have the potential to serve as sinks of CH(4) or may provide favorable conditions for CH(4) production. This study quantifies CH(4) flux from soils of riparian buffer systems comprised of three vegetation types and compares these fluxes with those of adjacent crop fields. We measured soil properties and diel and seasonal variations of CH(4) flux in 7 to 17 yr-old re-established riparian forest buffers, warm-season and cool-season grass filters, and an adjacent crop field located in the Bear Creek watershed in central Iowa. Forest buffer and grass filter soils had significantly lower bulk density (P \u3c 0.01); and higher pH (P \u3c 0.01), total carbon (TC) (P \u3c 0.01), and total nitrogen (TN) (P \u3c 0.01) than crop field soils. There was no significant relationship between CH(4) flux and soil moisture or soil temperature among sites within the range of conditions observed. Cumulative CH(4) flux was -0.80 kg CH(4)-C ha(-1) yr(-1) in the cropped field, -0.46 kg CH(4)-C ha(-1) yr(-1) within the forest buffers, and 0.04 kg CH(4)-C ha(-1) yr(-1) within grass filters, but difference among vegetation covers was not significant. Results suggest that CH(4) flux was not changed after establishment of perennial vegetation on cropped soils, despite significant changes in soil properties

Multifractal stationary random measures and multifractal random walks with log-infinitely divisible scaling laws

We define a large class of continuous time multifractal random measures and processes with arbitrary log-infinitely divisible exact or asymptotic scaling law. These processes generalize within a unified framework both the recently defined log-normal Multifractal Random Walk (MRW) [Bacry-Delour-Muzy] and the log-Poisson "product of cynlindrical pulses" [Barral-Mandelbrot]. Our construction is based on some ``continuous stochastic multiplication'' from coarse to fine scales that can be seen as a continuous interpolation of discrete multiplicative cascades. We prove the stochastic convergence of the defined processes and study their main statistical properties. The question of genericity (universality) of limit multifractal processes is addressed within this new framework. We finally provide some methods for numerical simulations and discuss some specific examples.Comment: 24 pages, 4 figure

Synchronization of Hamiltonian motion and dissipative effects in optical lattices: Evidence for a stochastic resonance

We theoretically study the influence of the noise strength on the excitation of the Brillouin propagation modes in a dissipative optical lattice. We show that the excitation has a resonant behavior for a specific amount of noise corresponding to the precise synchronization of the Hamiltonian motion on the optical potential surfaces and the dissipative effects associated with optical pumping in the lattice. This corresponds to the phenomenon of stochastic resonance. Our results are obtained by numerical simulations and correspond to the analysis of microscopic quantities (atomic spatial distributions) as well as macroscopic quantities (enhancement of spatial diffusion and pump-probe spectra). We also present a simple analytical model in excellent agreement with the simulations

A functional model, eigenvalues, and finite singular critical points for indefinite Sturm-Liouville operators

Eigenvalues in the essential spectrum of a weighted Sturm-Liouville operator are studied under the assumption that the weight function has one turning point. An abstract approach to the problem is given via a functional model for indefinite Sturm-Liouville operators. Algebraic multiplicities of eigenvalues are obtained. Also, operators with finite singular critical points are considered.Comment: 38 pages, Proposition 2.2 and its proof corrected, Remarks 2.5, 3.4, and 3.12 extended, details added in subsections 2.3 and 4.2, section 6 rearranged, typos corrected, references adde

Scalable transactions in the cloud: partitioning revisited

Lecture Notes in Computer Science, 6427Cloud computing is becoming one of the most used paradigms to deploy highly available and scalable systems. These systems usually demand the management of huge amounts of data, which cannot be solved with traditional nor replicated database systems as we know them. Recent solutions store data in special key-value structures, in an approach that commonly lacks the consistency provided by transactional guarantees, as it is traded for high scalability and availability. In order to ensure consistent access to the information, the use of transactions is required. However, it is well-known that traditional replication protocols do not scale well for a cloud environment. Here we take a look at current proposals to deploy transactional systems in the cloud and we propose a new system aiming at being a step forward in achieving this goal. We proceed to focus on data partitioning and describe the key role it plays in achieving high scalability.This work has been partially supported by the Spanish Government under grant TIN2009-14460-C03-02 and by the Spanish MEC under grant BES-2007-17362 and by project ReD Resilient Database Clusters (PDTC/EIA-EIA/109044/2008)

Standard Model baryogenesis through four-fermion operators in braneworlds

We study a new baryogenesis scenario in a class of braneworld models with low fundamental scale, which typically have difficulty with baryogenesis. The scenario is characterized by its minimal nature: the field content is that of the Standard Model and all interactions consistent with the gauge symmetry are admitted. Baryon number is violated via a dimension-6 proton decay operator, suppressed today by the mechanism of quark-lepton separation in extra dimensions; we assume that this operator was unsuppressed in the early Universe due to a time-dependent quark-lepton separation. The source of CP violation is the CKM matrix, in combination with the dimension-6 operators. We find that almost independently of cosmology, sufficient baryogenesis is nearly impossible in such a scenario if the fundamental scale is above 100 TeV, as required by an unsuppressed neutron-antineutron oscillation operator. The only exception producing sufficient baryon asymmetry is a scenario involving out-of-equilibrium c quarks interacting with equilibrium b quarks.Comment: 39 pages, 5 figures v2: typos, presentational changes, references and acknowledgments adde

Perspectives on multiscale modelling and experiments to accelerate materials development for fusion

Prediction of material performance in fusion reactor environments relies on computational modelling, and will continue to do so until the first generation of fusion power plants come on line and allow long-term behaviour to be observed. In the meantime, the modelling is supported by experiments that attempt to replicate some aspects of the eventual operational conditions. In 2019, a group of leading experts met under the umbrella of the IEA to discuss the current position and ongoing challenges in modelling of fusion materials and how advanced experimental characterisation is aiding model improvement. This review draws from the discussions held during that workshop. Topics covering modelling of irradiation-induced defect production and fundamental properties, gas behaviour, clustering and segregation, defect evolution and interactions are discussed, as well as new and novel multiscale simulation approaches, and the latest efforts to link modelling to experiments through advanced observation and characterisation techniques.MRG, SLD, and DRM acknowledge funding by the RCUK Energy Programme [grant number EP/T012250/1]. Part of this work has been carried out within the framework of the EUROFusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. JRT acknowledges funding from the US Department of Energy (DOE) through grant DE-SC0017899. ZB, LY,BDW, and SJZ acknowledge funding through the US DOE Fusion Energy Sciences grant DE-SC0006661ZB, LY and BDW also were partially supported from the US DOE Office of Science, Office of Fusion Energy Sciences and Office of Advanced Scientific Computing Research through the Scientific Discovery through Advanced Computing (SciDAC) project on Plasma-Surface Interactions. JMa acknowledges support from the US-DOEs Office of Fusion Energy Sciences (US-DOE), project DE-SC0019157. Pacific Northwest National Laboratory is operated by Battelle Memorial Institute for the US Department of Energy (DOE) under contract DE-AC05-76RL01830. YO and YZ were supported as part of the Energy Dissipation to Defect Evolution (EDDE), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under contract number DE-AC05-00OR22725. TS and TT are supported by JSPS KAKENHI Grant Number 19K05338

Spallation reactions. A successful interplay between modeling and applications

The spallation reactions are a type of nuclear reaction which occur in space by interaction of the cosmic rays with interstellar bodies. The first spallation reactions induced with an accelerator took place in 1947 at the Berkeley cyclotron (University of California) with 200 MeV deuterons and 400 MeV alpha beams. They highlighted the multiple emission of neutrons and charged particles and the production of a large number of residual nuclei far different from the target nuclei. The same year R. Serber describes the reaction in two steps: a first and fast one with high-energy particle emission leading to an excited remnant nucleus, and a second one, much slower, the de-excitation of the remnant. In 2010 IAEA organized a worskhop to present the results of the most widely used spallation codes within a benchmark of spallation models. If one of the goals was to understand the deficiencies, if any, in each code, one remarkable outcome points out the overall high-quality level of some models and so the great improvements achieved since Serber. Particle transport codes can then rely on such spallation models to treat the reactions between a light particle and an atomic nucleus with energies spanning from few tens of MeV up to some GeV. An overview of the spallation reactions modeling is presented in order to point out the incomparable contribution of models based on basic physics to numerous applications where such reactions occur. Validations or benchmarks, which are necessary steps in the improvement process, are also addressed, as well as the potential future domains of development. Spallation reactions modeling is a representative case of continuous studies aiming at understanding a reaction mechanism and which end up in a powerful tool.Comment: 59 pages, 54 figures, Revie