176 research outputs found
Performance of the electromagnetic and hadronic prototype segments of the ALICE Forward Calorimeter
We present the performance of a full-length prototype of the ALICE Forward
Calorimeter (FoCal). The detector is composed of a silicon-tungsten
electromagnetic sampling calorimeter with longitudinal and transverse
segmentation (FoCal-E) of about 20 and a hadronic
copper-scintillating-fiber calorimeter (FoCal-H) of about 5.
The data were taken between 2021 and 2023 at the CERN PS and SPS beam lines
with hadron (electron) beams up to energies of 350 (300) GeV. Regarding
FoCal-E, we report a comprehensive analysis of its response to minimum ionizing
particles across all pad layers. The longitudinal shower profile of
electromagnetic showers is measured with a layer-wise segmentation of 1.
As a projection to the performance of the final detector in electromagnetic
showers, we demonstrate linearity in the full energy range, and show that the
energy resolution fulfills the requirements for the physics needs.
Additionally, the performance to separate two-showers events was studied by
quantifying the transverse shower width. Regarding FoCal-H, we report a
detailed analysis of the response to hadron beams between 60 and 350 GeV. The
results are compared to simulations obtained with a Geant4 model of the test
beam setup, which in particular for FoCal-E are in good agreement with the
data. The energy resolution of FoCal-E was found to be lower than 3% at
energies larger than 100 GeV. The response of FoCal-H to hadron beams was found
to be linear, albeit with a significant intercept that is about factor 2 larger
than in simulations. Its resolution, which is non-Gaussian and generally larger
than in simulations, was quantified using the FWHM, and decreases from about
16% at 100 GeV to about 11% at 350 GeV. The discrepancy to simulations, which
is particularly evident at low hadron energies, needs to be further
investigated.Comment: 55 pages (without acronyms), 45 captioned figure
A study of the radiation tolerance of cvd diamond to 70 mev protons, fast neutrons and 200 mev pions
We measured the radiation tolerance of commercially available diamonds grown by the Chemical Vapor Deposition process by measuring the charge created by a 120 GeV hadron beam in a 50 μm pitch strip detector fabricated on each diamond sample before and after irradiation. We irradiated one group of samples with 70 MeV protons, a second group of samples with fast reactor neutrons (defined as energy greater than 0.1 MeV), and a third group of samples with 200 MeV pions, in steps, to (8.8±0.9) × 10 protons/cm, (1.43±0.14) × 10 neutrons/cm, and (6.5±1.4) × 1014 pions/cm, respectively. By observing the charge induced due to the separation of electron–hole pairs created by the passage of the hadron beam through each sample, on an event-by-event basis, as a function of irradiation fluence, we conclude all datasets can be described by a first-order damage equation and independently calculate the damage constant for 70 MeV protons, fast reactor neutrons, and 200 MeV pions. We find the damage constant for diamond irradiated with 70 MeV protons to be 1.62±0.07(stat)±0.16(syst)× 10−18 cm/(pμm), the damage constant for diamond irradiated with fast reactor neutrons to be 2.65±0.13(stat)±0.18(syst)× 10−18 cm/(nμm), and the damage constant for diamond irradiated with 200 MeV pions to be 2.0±0.2(stat)±0.5(syst)× 10−18 cm/(πμm). The damage constants from this measurement were analyzed together with our previously published 24 GeV proton irradiation and 800 MeV proton irradiation damage constant data to derive the first comprehensive set of relative damage constants for Chemical Vapor Deposition diamond. We find 70 MeV protons are 2.60 ± 0.29 times more damaging than 24 GeV protons, fast reactor neutrons are 4.3 ± 0.4 times more damaging than 24 GeV protons, and 200 MeV pions are 3.2 ± 0.8 more damaging than 24 GeV protons. We also observe the measured data can be described by a universal damage curve for all proton, neutron, and pion irradiations we performed of Chemical Vapor Deposition diamond. Finally, we confirm the spatial uniformity of the collected charge increases with fluence for polycrystalline Chemical Vapor Deposition diamond, and this effect can also be described by a universal curve
Inclusive and multiplicity dependent production of electrons from heavy-flavour hadron decays in pp and p-Pb collisions
Measurements of the production of electrons from heavy-flavour hadron decays in pp collisions at root s = 13 TeV at midrapidity with the ALICE detector are presented down to a transverse momentum (p(T)) of 0.2 GeV/c and up to p(T) = 35 GeV/c, which is the largest momentum range probed for inclusive electron measurements in ALICE. In p-Pb collisions, the production cross section and the nuclear modification factor of electrons from heavy-flavour hadron decays are measured in the p(T) range 0.5 < p(T) < 26 GeV/c at root s(NN) = 8.16 TeV. The nuclear modification factor is found to be consistent with unity within the statistical and systematic uncertainties. In both collision systems, first measurements of the yields of electrons from heavy-flavour hadron decays in different multiplicity intervals normalised to the multiplicity-integrated yield (self-normalised yield) at midrapidity are reported as a function of the self-normalised charged-particle multiplicity estimated at midrapidity. The self-normalised yields in pp and p-Pb collisions grow faster than linear with the self-normalised multiplicity. A strong p(T) dependence is observed in pp collisions, where the yield of high-p(T) electrons increases faster as a function of multiplicity than the one of low-p(T) electrons. The measurement in p-Pb collisions shows no p(T) dependence within uncertainties. The self-normalised yields in pp and p-Pb collisions are compared with measurements of other heavy-flavour, light-flavour, and strange particles, and with Monte Carlo simulations
First measurement of Λc+ production down to pT=0 in pp and p-Pb collisions at sNN=5.02 TeV
The production of prompt Lambda+c baryons has been measured at midrapidity in the transverse momentum interval 0 < pT < 1 GeV/c for the first time, in pp and p–Pb collisions at a center-of-mass energy per nucleon-nucleon
collision √s NN = 5.02 TeV. The measurement was performed in the decay channel Lambda+c → pK0S by applying new decay reconstruction techniques using a Kalman-Filter vertexing algorithm and adopting a machine-learning
approach for the candidate selection. The pT -integrated Lambda+c production cross sections in both collision systems were determined and used along with the measured yields in Pb–Pb collisions to compute the pT -integrated
nuclear modification factors R pPb and R AA of Lambda+c baryons, which are compared to model calculations that
consider nuclear modification of the parton distribution functions. The Lambda+c /D0 baryon-to-meson yield ratio is
reported for pp and p–Pb collisions. Comparisons with models that include modified hadronization processes are
presented, and the implications of the results on the understanding of charm hadronization in hadronic collisions
are discussed. A significant (3.7σ ) modification of the mean transverse momentum of Lambda+c baryons is seen in p–Pb collisions with respect to pp collisions, while the pT -integrated Lambda+c /D0 yield ratio was found to be consistent between the two collision systems within the uncertainties
Light (anti)nuclei production in Pb-Pb collisions at sNN=5.02 TeV
The measurement of the production of deuterons, tritons and 3 He and their antiparticles in Pb-Pb collisions
at √s NN = 5.02 TeV is presented in this article. The measurements are carried out at midrapidity (|y| <
0.5) as a function of collision centrality using the ALICE detector. The pT -integrated yields, the coalescence
parameters and the ratios to protons and antiprotons are reported and compared with nucleosynthesis models. The
comparison of these results in different collision systems at different center-of-mass collision energies reveals a
suppression of nucleus production in small systems. In the Statistical Hadronisation Model framework, this can
be explained by a small correlation volume where the baryon number is conserved, as already shown in previous
fluctuation analyses. However, a different size of the correlation volume is required to describe the proton yields
in the same data sets. The coalescence model can describe this suppression by the fact that the wave functions
of the nuclei are large and the fireball size starts to become comparable and even much smaller than the actual
nucleus at low multiplicities
Measurement of the non-prompt D-meson fraction as a function of multiplicity in proton-proton collisions at = 13 TeV
The fractions of non-prompt (i.e. originating from beauty-hadron decays) D0
and D+ mesons with respect to the inclusive yield are measured as a function of the
charged-particle multiplicity in proton-proton collisions at a centre-of-mass energy of √s =
13 TeV with the ALICE detector at the LHC. The results are reported in intervals of
transverse momentum (pT) and integrated in the range 1 < pT < 24 GeV/c. The fraction
of non-prompt D0 and D+ mesons is found to increase slightly as a function of pT in
all the measured multiplicity intervals, while no significant dependence on the charged-
particle multiplicity is observed. In order to investigate the production and hadronisation
mechanisms of charm and beauty quarks, the results are compared to PYTHIA 8 as well
as EPOS 3 and EPOS 4 Monte Carlo simulations, and to calculations based on the colour
glass condensate including three-pomeron fusion
Accessing the strong interaction between Λ baryons and charged kaons with the femtoscopy technique at the LHC
The interaction between Λ baryons and kaons/antikaons is a crucial ingredient for the strangeness S=0 and S=-2 sector of the meson–baryon interaction at low energies. In particular, the Lambda-Kbar might help in understanding the origin of states such as the Csi(1620), whose nature and properties are still under debate. Experimental data on Lambda-K and Lambda-Kbar systems are scarce, leading to large uncertainties and tension between the available theoretical predictions constrained by such data. In this Letter we present the measurements of Λ–KK− and Λ–KK+ correlations obtained in the high-multiplicity triggered data sample in pp collisions at sqrt(s) = 13 TeV recorded by ALICE at the LHC. The correlation function for both pairs is modeled using the Lednický–Lyuboshits analytical formula and the corresponding scattering parameters are extracted. The Λ–KK+ correlations show the presence of several structures at relative momenta k* above 200 MeV/c, compatible with the Ω baryon, the , and resonances decaying into Λ–K− pairs. The low k* region in the Λ–KK+ also exhibits the presence of the state, expected to strongly couple to the measured pair. The presented data allow to access the ΛK+ and ΛK− strong interaction with an unprecedented precision and deliver the first experimental observation of the decaying into ΛK−
First measurement of prompt and non-prompt D⁎+ vector meson spin alignment in pp collisions at s=13 TeV
This letter reports the first measurement of spin alignment, with respect to the helicity axis, for D*+ vector mesons and their charge conjugates from charm-quark hadronisation (prompt) and from beauty-meson decays (non-prompt) in hadron collisions. The measurements were performed at midrapidity (|y| D0 (-> K- pi+) pi+ decay products, in the D*+ rest frame, with respect to the D*+ momentum direction in the pp centre of mass frame. The rho_00 value for prompt D*+ mesons is consistent with 1/3, which implies no spin alignment. However, for non-prompt D*+ mesons an evidence of rho_00 larger than 1/3 is found. The measured value of the spin density element is in the interval, which is consistent with a Pythia 8 Monte Carlo simulation coupled with the EvtGen package, which implements the helicity conservation in the decay of D*+ meson from beauty mesons. In non-central heavy-ion collisions, the spin of the D*+ mesons may be globally aligned with the direction of the initial angular momentum and magnetic field. Based on the results for pp collisions reported in this letter it is shown that alignment of non-prompt D*+ mesons due to the helicity conservation coupled to the collective anisotropic expansion may mimic the signal of global spin alignment in heavy-ion collisions
Enhanced Deuteron Coalescence Probability in Jets
: The transverse-momentum (p_{T}) spectra and coalescence parameters B_{2} of (anti)deuterons are measured in p-p collisions at sqrt[s]=13 TeV for the first time in and out of jets. In this measurement, the direction of the leading particle with the highest p_{T} in the event (p_{T}^{lead}>5 GeV/c) is used as an approximation for the jet axis. The event is consequently divided into three azimuthal regions, and the jet signal is obtained as the difference between the toward region, that contains jet fragmentation products in addition to the underlying event (UE), and the transverse region, which is dominated by the UE. The coalescence parameter in the jet is found to be approximately a factor of 10 larger than that in the underlying event. This experimental observation is consistent with the coalescence picture and can be attributed to the smaller average phase-space distance between nucleons in the jet cone as compared with the underlying event. The results presented in this Letter are compared to predictions from a simple nucleon coalescence model, where the phase-space distributions of nucleons are generated using pythia8 with the Monash 2013 tuning, and to predictions from a deuteron production model based on ordinary nuclear reactions with parametrized energy-dependent cross sections tuned on data. The latter model is implemented in pythia8.3. Both models reproduce the observed large difference between in-jet and out-of-jet coalescence parameters, although the almost flat trend of the B_{2}^{Jet} is not reproduced by the models, which instead give a decreasing trend
New design approach of Front-End Electronics for high-accuracy time measurement systems
International audienceThis paper discusses a detailed design approach to determine the optimal input impedance () and bandwidth (BW) for current preamplifiers in Front End Electronics (FEE) of high-accuracy time measurement systems used in particle detection. Our study shows the effect of including the parasitic interconnection inductances of bonding wires between the detector and the FEE. We explain also the development of a new mathematical model for the estimation of the timing jitter of the current preamplifier in the case of using a low capacitor detector () as diamond. Tests and measurements of the response of a transimpedance amplifier (TIA) designed in a 130 nm 1P8M CMOS technology are used to demonstrates the accuracy of the design approach and the timing jitter estimation model
- …