Vaccine breakthrough hypoxemic COVID-19 pneumonia in patients with auto-Abs neutralizing type I IFNs

Life-threatening `breakthrough' cases of critical COVID-19 are attributed to poor or waning antibody response to the SARS- CoV-2 vaccine in individuals already at risk. Pre-existing autoantibodies (auto-Abs) neutralizing type I IFNs underlie at least 15% of critical COVID-19 pneumonia cases in unvaccinated individuals; however, their contribution to hypoxemic breakthrough cases in vaccinated people remains unknown. Here, we studied a cohort of 48 individuals ( age 20-86 years) who received 2 doses of an mRNA vaccine and developed a breakthrough infection with hypoxemic COVID-19 pneumonia 2 weeks to 4 months later. Antibody levels to the vaccine, neutralization of the virus, and auto- Abs to type I IFNs were measured in the plasma. Forty-two individuals had no known deficiency of B cell immunity and a normal antibody response to the vaccine. Among them, ten (24%) had auto-Abs neutralizing type I IFNs (aged 43-86 years). Eight of these ten patients had auto-Abs neutralizing both IFN-a2 and IFN-., while two neutralized IFN-omega only. No patient neutralized IFN-ss. Seven neutralized 10 ng/mL of type I IFNs, and three 100 pg/mL only. Seven patients neutralized SARS-CoV-2 D614G and the Delta variant (B.1.617.2) efficiently, while one patient neutralized Delta slightly less efficiently. Two of the three patients neutralizing only 100 pg/mL of type I IFNs neutralized both D61G and Delta less efficiently. Despite two mRNA vaccine inoculations and the presence of circulating antibodies capable of neutralizing SARS-CoV-2, auto-Abs neutralizing type I IFNs may underlie a significant proportion of hypoxemic COVID-19 pneumonia cases, highlighting the importance of this particularly vulnerable population

Études expérimentale et numérique du colmatage de filtre plissé

Pleated filters are widely used in air treatments because of the advantageous effective surface to overall dimension ratio they offer. Their major drawback though resides in their reduced lifetime which still needs to be controlled. Indeed, when clogging, the pressure drop considerably increases, the filtration flow is then no longer maintained which might lead to the deterioration of the media. It is then crucial to characterize the evolution of the pressure drop under operating conditions in order to best design these equipments. Part of our work consisted in studying how the operating conditions influence the geometry of the deposit. To do so, we used Single-Photon Emission Computed Tomography (SPECT), a non-destructive imaging technique that keeps intact the particle structuring. The visualization of aerosol deposit at the beginning of the filtration process allows observing preferential particle deposition on the whole height of the pleat. A numerical approach was used to study the permeability of bimodal fibrous media and we experimentally studied the local velocity as well as the biphasic flow inside pleated filter media. Comparison between experiments and simulations allowed us to validate the Geodict code for a wide range of media properties and velocities. Regarding bimodal fibrous media, the fast data acquisition has allowed testing several existing models which resulted in classifying them in a unique way. If the experimental results on the initial deposition in pleated filters are encouraging, those related to beforehand clogging point to several improvements regarding the technique we usedL'utilisation de filtres plissés dans le domaine du traitement de l'air est extrêmement fréquente en raison de leur simplicité d'utilisation et de maintenance. Néanmoins, au cours du colmatage, la perte de charge augmente considérablement avec le dépôt de particules. Par conséquent le débit de filtration n'est plus maintenu et une détérioration des médias peut se produire. Il est essentiel de caractériser cette évolution en fonction des conditions opératoires pour mieux concevoir ces équipements. Les travaux ont consisté en une étude expérimentale de l'influence des conditions opératoires sur la géométrie du dépôt par des observations en Tomographie d'Émission MonoPhotonique. Une approche numérique a consisté, dans un premier temps, en une étude de la perméabilité de médias bien caractérisés afin de valider le code GeoDict. Dans un deuxième temps, une étude de la vitesse de l'air a été entreprise sur les médias plissés. La confrontation des résultats numériques avec les données expérimentales nous a permis une validation du code dans les gammes de propriétés des médias et de vitesses typiques. Concernant les médias bimodaux, l'acquisition rapide de données a permis de tester différentes corrélations analytiques afin de classifier les modèles existants d'une manière qui facilite leur utilisation. Si les résultats expérimentaux obtenus sur la localisation du dépôt préférentiel initial dans les filtres plissés sont encourageants, notamment vis-à-vis des simulations d'écoulement réalisées avec GeoDict, ceux issus des acquisitions sur les filtres précolmatés sont à prendre avec prudence et suggèrent d'apporter un certain nombre d'amélioration à notre techniqu

Experimental and numerical study of pleated filters clogging

L'utilisation de filtres plissés dans le domaine du traitement de l'air est extrêmement fréquente en raison de leur simplicité d'utilisation et de maintenance. Néanmoins, au cours du colmatage, la perte de charge augmente considérablement avec le dépôt de particules. Par conséquent le débit de filtration n'est plus maintenu et une détérioration des médias peut se produire. Il est essentiel de caractériser cette évolution en fonction des conditions opératoires pour mieux concevoir ces équipements. Les travaux ont consisté en une étude expérimentale de l'influence des conditions opératoires sur la géométrie du dépôt par des observations en Tomographie d'Émission MonoPhotonique. Une approche numérique a consisté, dans un premier temps, en une étude de la perméabilité de médias bien caractérisés afin de valider le code GeoDict. Dans un deuxième temps, une étude de la vitesse de l'air a été entreprise sur les médias plissés. La confrontation des résultats numériques avec les données expérimentales nous a permis une validation du code dans les gammes de propriétés des médias et de vitesses typiques. Concernant les médias bimodaux, l'acquisition rapide de données a permis de tester différentes corrélations analytiques afin de classifier les modèles existants d'une manière qui facilite leur utilisation. Si les résultats expérimentaux obtenus sur la localisation du dépôt préférentiel initial dans les filtres plissés sont encourageants, notamment vis-à-vis des simulations d'écoulement réalisées avec GeoDict, ceux issus des acquisitions sur les filtres précolmatés sont à prendre avec prudence et suggèrent d'apporter un certain nombre d'amélioration à notre techniquePleated filters are widely used in air treatments because of the advantageous effective surface to overall dimension ratio they offer. Their major drawback though resides in their reduced lifetime which still needs to be controlled. Indeed, when clogging, the pressure drop considerably increases, the filtration flow is then no longer maintained which might lead to the deterioration of the media. It is then crucial to characterize the evolution of the pressure drop under operating conditions in order to best design these equipments. Part of our work consisted in studying how the operating conditions influence the geometry of the deposit. To do so, we used Single-Photon Emission Computed Tomography (SPECT), a non-destructive imaging technique that keeps intact the particle structuring. The visualization of aerosol deposit at the beginning of the filtration process allows observing preferential particle deposition on the whole height of the pleat. A numerical approach was used to study the permeability of bimodal fibrous media and we experimentally studied the local velocity as well as the biphasic flow inside pleated filter media. Comparison between experiments and simulations allowed us to validate the Geodict code for a wide range of media properties and velocities. Regarding bimodal fibrous media, the fast data acquisition has allowed testing several existing models which resulted in classifying them in a unique way. If the experimental results on the initial deposition in pleated filters are encouraging, those related to beforehand clogging point to several improvements regarding the technique we use

Études expérimentale et numérique du colmatage de filtre plissé

L'utilisation de filtres plissés dans le domaine du traitement de l'air est extrêmement fréquente en raison de leur simplicité d'utilisation et de maintenance. Néanmoins, au cours du colmatage, la perte de charge augmente considérablement avec le dépôt de particules. Par conséquent le débit de filtration n'est plus maintenu et une détérioration des médias peut se produire. Il est essentiel de caractériser cette évolution en fonction des conditions opératoires pour mieux concevoir ces équipements. Les travaux ont consisté en une étude expérimentale de l'influence des conditions opératoires sur la géométrie du dépôt par des observations en Tomographie d'Émission MonoPhotonique. Une approche numérique a consisté, dans un premier temps, en une étude de la perméabilité de médias bien caractérisés afin de valider le code GeoDict. Dans un deuxième temps, une étude de la vitesse de l'air a été entreprise sur les médias plissés. La confrontation des résultats numériques avec les données expérimentales nous a permis une validation du code dans les gammes de propriétés des médias et de vitesses typiques. Concernant les médias bimodaux, l'acquisition rapide de données a permis de tester différentes corrélations analytiques afin de classifier les modèles existants d'une manière qui facilite leur utilisation. Si les résultats expérimentaux obtenus sur la localisation du dépôt préférentiel initial dans les filtres plissés sont encourageants, notamment vis-à-vis des simulations d'écoulement réalisées avec GeoDict, ceux issus des acquisitions sur les filtres précolmatés sont à prendre avec prudence et suggèrent d'apporter un certain nombre d'amélioration à notre techniquePleated filters are widely used in air treatments because of the advantageous effective surface to overall dimension ratio they offer. Their major drawback though resides in their reduced lifetime which still needs to be controlled. Indeed, when clogging, the pressure drop considerably increases, the filtration flow is then no longer maintained which might lead to the deterioration of the media. It is then crucial to characterize the evolution of the pressure drop under operating conditions in order to best design these equipments. Part of our work consisted in studying how the operating conditions influence the geometry of the deposit. To do so, we used Single-Photon Emission Computed Tomography (SPECT), a non-destructive imaging technique that keeps intact the particle structuring. The visualization of aerosol deposit at the beginning of the filtration process allows observing preferential particle deposition on the whole height of the pleat. A numerical approach was used to study the permeability of bimodal fibrous media and we experimentally studied the local velocity as well as the biphasic flow inside pleated filter media. Comparison between experiments and simulations allowed us to validate the Geodict code for a wide range of media properties and velocities. Regarding bimodal fibrous media, the fast data acquisition has allowed testing several existing models which resulted in classifying them in a unique way. If the experimental results on the initial deposition in pleated filters are encouraging, those related to beforehand clogging point to several improvements regarding the technique we usedMETZ-SCD (574632105) / SudocNANCY1-Bib. numérique (543959902) / SudocNANCY2-Bibliotheque electronique (543959901) / SudocNANCY-INPL-Bib. électronique (545479901) / SudocSudocFranceF

Aerosol deposit characterization in pleated filter via single-emission computed tomography

International audiencePleated filters are widely used for many industrial applications in air treatments due to their high effective surface area for a low overall dimension. Nevertheless, their lifetime still needs to be controlled. In fact, during clogging, the pressure drop considerably increases with cake deposition. It is crucial to characterize the evolution of pressure drop regarding to the operating conditions and filter characteristics. The visualization of aerosol deposit at the beginning of the filtration process allows observing preferential particle deposition on the whole height of pleat. To keep the particle structuring intact, a non-destructive method are used. The exploitation of Single-photon emission computed tomography (SPECT) and resulted images is performed

Simulations of filter media performances from microtomography-based computational domain. Experimental and analytical comparison

International audienceIn this work, synchrotron X-ray microtomography was used to produce high spatial resolution images of one fibrous filter, made of binderless monodispersed fiberglass. Based on these images, representative computational domains were created using the import interface of the GeoDict software. Both flow and collection efficiency simulations were then carried out using the CFD modules of GeoDict. In parallel, permeability and collection efficiency measurements were performed on the same media, to provide an experimental comparison. A very good agreement was found between the experimental and simulated permeability values. However, simulated efficiency values tend to underestimate the experimental ones. In the second part of the paper, an image analysis program based on Matlab (R) was used to determine the structural properties of the fibrous structures, namely the thickness, the solid volume fraction and the fiber size distribution. These data were introduced into analytical models that successfully predict the permeability and collection efficiency values

Combination of Single-Photon Emission and X-Ray Computed Tomography to visualize aerosol deposition in pleated filter

International audienc

Effect of mixing sequence on the curing of amine-hardened epoxy/alumina nanocomposites as assessed by optical refractometry

High performance refractometry has been proven to be a useful tool to elucidate the isothermal curing process of nanocomposites. As a model system an amine-hardening epoxy filled with non-surface-treated alumina nanoparticles was selected. The tremendous resolution of this experimental technique is used to study morphological changes within nanocomposites via the refractive index. It is shown that these morphological changes are not simply due to the curing process but also depend on the sequence of mixing the nanoparticles either first into the resin or first into the hardener. Independent of the resin/hardener composition, the type of the mixing sequence discriminates systematically between two distinct refractive index curves produced by the curing process. The difference between the two refractive index curves increases monotonically with curing time, which underlines the importance of the initial molecular environment of the nanoparticles

Influence of Nanoparticles on the Coupling Between Optical Dipoles in Epoxy-Silica Nanocomposites During Network Formation

High-performance refractometry and infrared spectroscopy are combined in order to elucidate the gelation process and the glass transition during the network formation of epoxies and epoxy-based nanocomposites. Whereas infrared spectroscopy yields the chemical conversion due to the opening of oxirane rings during the covalent network formation, high-performance refractometry is extremely sensitive to the accompanying changes of the arrangement of the molecular network. In accordance with the Lorentz-Lorenz relationship, the evolution of the refractive index seems to reflect that of the mass density during polymerization of the epoxy-based systems within the limits of a few percent. The slight deviations from the Lorentz-Lorenz relationship, which occur during the gelation of the epoxy-based systems, are attributed to long-ranged dipole-dipole interactions, which respond at optical frequencies. This point of view is supported by the fact that chemically inert silica nanoparticles embedded in the pure epoxy matrix as disturbances for these dipole-dipole interactions are able to diminish or even to suppress totally this excess contribution of the refractive index

Matériaux du spinozisme

Spinoza cite peu ses prédécesseurs, mais la critique s’est attachée à montrer l’insertion de la pensée et de l’écriture spinozistes dans différentes traditions. Ce dossier analyse donc comment Spinoza remanie et réécrit ce qu’il trouve devant lui. Autrement dit, il s’agit de comprendre comment, pour lui, ces « héritages » sont en fait des matériaux à retravailler : comment le système spinoziste traite-t-il les questions du suicide, de l’expérience historique, de la toute-puissance divine et de la finitude humaine ? Ainsi, le problème du suicide oblige à penser la destruction de soi-même dans une philosophie qui analyse l’individu à partir d’un conatus qui paraît exclure toute possibilité de contradiction interne. De même, la réflexion politique de Spinoza, comme celle de Hobbes, s’appuie sur des exemples empruntés aux historiens latins, ce qui implique la constitution de modèles historiques. La toute-puissance divine est pensée par l’infléchissement de la catégorie de causalité, qui permet de donner un autre sens à l’infini et aux rapports entre essence divine et lois de la nature. La réflexion sur la finitude fonde une pensée de l’existence sur un contenu issu de l’expérience humaine la plus commune – ce qui permet de comprendre la signification de l’attention portée par Spinoza aux récits religieux : elle renvoie non seulement aux nécessités de la controverse sur l’Écriture, mais aussi au fait que ces récits alimentent sa méditation sur les formes de vie. Spinoza rarely quotes his predecessors, but scholars have focused on showing how Spinozist thought and writing fits into different traditions. This dossier therefore analyses how Spinoza reshapes and rewrites what he finds before him. In other words, this involves ascertaining how, for him, these “legacies” are in fact materials to be reworked: how does the Spinozist system deal with questions of suicide, historical experience, divine omnipotence and human finitude? So the problem of suicide forces us to think of the destruction of the self within the framework of a philosophy which bases its analysis of the individual on a conatus which seems to exclude any possibility of internal contradiction. Similarly, Spinoza’s political reflection, like that of Hobbes, is based on examples borrowed from Latin historians, which involves the creation of historical models. Divine omnipotence is conceived through the reorientation of the category of causality, which makes it possible to give another meaning to the infinite and to the relationship between the divine essence and the laws of nature. Reflection on finitude bases the idea of existence on material stemming from the most common human experience – which helps to explain why Spinoza gave such attention to religious narratives: that attention relates not only to the necessities of Scriptural debate but also to the fact that these narratives fuel his reflections on the different forms of life