Deformation and spallation of shocked Cu bicrystals with Σ3 coherent and symmetric incoherent twin boundaries

We perform molecular dynamics simulations of Cu bicrystals with two important grain boundaries (GBs), Σ3 coherent twin boundaries (CTB), and symmetric incoherent twin boundaries (SITB) under planar shock wave loading. It is revealed that the shock response (deformation and spallation) of the Cu bicrystals strongly depends on the GB characteristics. At the shock compression stage, elastic shock wave can readily trigger GB plasticity at SITB but not at CTB. The SITB can induce considerable wave attenuation such as the elastic precursor decay via activating GB dislocations. For example, our simulations of a Cu multilayer structure with 53 SITBs (∼1.5-μm thick) demonstrate a ∼80% elastic shock decay. At the tension stage, spallation tends to occur at CTB but not at SITB due to the high mobility of SITB. The SITB region transforms into a threefold twin via a sequential partial dislocation slip mechanism, while CTB preserves its integrity before spallation. In addition, deformation twinning is a mechanism for inducing surface step during shock tension stage. The drastically different shock response of CTB and SITB could in principle be exploited for, or benefit, interface engineering and materials design

Left-right loading dependence of shock response of (111)//(112) Cu bicrystals: Deformation and spallation

We investigate with molecular dynamics the dynamic response of Cu bicrystals with a special asymmetric grain boundary (GB), (111)//(112)〈110〉, and its dependence on the loading directions. Shock loading is applied along the GB normal either from the left or right to the GB. Due to the structure asymmetry, the bicrystals demonstrate overall strong left-right loading dependence of its shock response, including compression wave features, compression and tensile plasticity, damage characteristics (e.g., spall strength), effective wave speeds and structure changes, except that spallation remains dominated by the GB damage regardless of the loading directions. The presence or absence of transient microtwinning also depends on the loading directions

Shock compression and spallation of single crystal tantalum

We present molecular dynamics simulations of shock-induced plasticity and spall damage in single crystal Ta described by a recently developed embedded-atom-method (EAM) potential and a volumedependent qEAM potential. We use impact or Hugoniotstat simulations to investigate the Hugoniots, deformation and spallation. Both EAM and qEAM are accurate in predicting, e.g., the Hugoniots and γ - surfaces. Deformation and spall damage are anisotropic for Ta single crystals. Our preliminary results show that twinning is dominant for [100] and [110] shock loading, and dislocation, for [111]. Spallation initiates with void nucleation at defective sites from remnant compressional deformation or tensile plasticity. Spall strength decreases with increasing shock strength, while its rate dependence remains to be explored

Accelerating the dynamics of infrequent events: Combining hyperdynamics and parallel replica dynamics to treat epitaxial layer growth

During the growth of a surface, morphology-controlling diffusion events occur over time scales that far exceed those accessible to molecular dynamics (MD) simulation. Kinetic Monte Carlo offers a way to reach much longer times, but suffers from the fact that the dynamics are correct only if all possible diffusion events are specified in advance. This is difficult due to the concerted nature of many of the recently discovered surface diffusion mechanisms and the complex configurations that arise during real growth. Here the authors describe two new approaches for this type of problem. The first, hyperdynamics, is an accelerated MD method, in which the trajectory is run on a modified potential energy surface and time is accumulated as a statistical property. Relative to regular MD, hyperdynamics can give computational gains of more than 10{sup 2}. The second method offers a way to parallelize the dynamics efficiently for systems too small for conventional parallel MD algorithms. Both methods exploit the infrequent-event nature of the diffusion process. After an introductory description of these methods, the authors present preliminary results from simulations combining the two approaches to reach near-millisecond time scales on systems relevant to epitaxial metal growth

Patient satisfaction with anaesthesia care: development of a psychometric questionnaire and benchmarking among six hospitals in Switzerland and Austria†‡

Background. We describe the development and comparison of a psychometric questionnaire on patient satisfaction with anaesthesia care among six hospitals. Methods. We used a rigorous protocol: generation of items, construction of the pilot questionnaire, pilot study, statistical analysis (construct validity, factor analysis, reliability analysis), compilation of the final questionnaire, main study, repeated analysis of construct validity and reliability. We compared the mean total problem score and the scores for the dimensions: ‘Information/Involvement in decision‐making', and ‘Continuity of personal care by anaesthetist'. The influence of potential confounding variables was tested (multiple linear regression). Results. The average problem score from all hospitals was 18.6%. Most problems are mentioned in the dimensions ‘Information/Involvement in decision‐making' (mean problem score: 30.9%) and ‘Continuity of personal care by anaesthetist' (mean problem score: 32.2%). The overall assessment of the quality of anaesthesia care was good to excellent in 98.7% of cases. The most important dimension was ‘Information/Involvement in decision‐making'. The mean total problem score was significantly lower for two hospitals than the total mean for all hospitals (significantly higher at two hospitals) (P<0.05). Amongst the confounding variables considered, age, sex, subjective state of health, type of anaesthesia and level of education had an influence on the total problem score and the two dimensions mentioned. There were only marginal differences with and without the influence of the confounding variables for the different hospitals. Conclusions. A psychometric questionnaire on patient satisfaction with anaesthesia care must cover areas such as patient information, involvement in decision‐making, and contact with the anaesthetist. The assessment using summed scores for dimensions is more informative than a global summed rating. There were significant differences between hospitals. Moreover, the high problem scores indicate a great potential for improvement at all hospitals. Br J Anaesth 2002; 89: 863-7

Fatigue analysis-based numerical design of stamping tools made of cast iron

This work concerns stress and fatigue analysis of stamping tools made of cast iron with an essentially pearlitic matrix and containing foundry defects. Our approach consists at first, in coupling the stamping numerical processing simulations and structure analysis in order to improve the tool stiffness geometry for minimizing the stress state and optimizing their fatigue lifetime. The method consists in simulating the stamping process by considering the tool as a perfect rigid body. The estimated contact pressure is then used as boundary condition for FEM structure loading analysis of the tool. The result of this analysis is compared with the critical stress limit depending on the automotive model. The acceptance of this test allows calculating the fatigue lifetime of the critical zone by using the S–N curve of corresponding load ratio. If the prescribed tool life requirements are not satisfied, then the critical region of the tool is redesigned and the whole simulation procedures are reactivated. This method is applied for a cast iron EN-GJS-600-3. The stress-failure (S–N) curves for this material is determined at room temperature under push pull loading with different load ratios R0σmin/σmax0−2, R0−1 and R00.1. The effects of the foundry defects are determined by SEM observations of crack initiation sites. Their presence in tested specimens is associated with a reduction of fatigue lifetime by a factor of 2. However, the effect of the load ratio is more important

Use of the Richtmyer-Meshkov Instability to Infer Yield Stress at High-Energy Densities

We use the Richtmyer-Meshkov instability (RMI) at a metal-gas interface to infer the metal’s yield stress (Y) under shock loading and release. We first model how Y stabilizes the RMI using hydrodynamics simulations with a perfectly plastic constitutive relation for copper (Cu). The model is then tested with molecular dynamics (MD) of crystalline Cu by comparing the inferred Y from RMI simulations with direct stress-strain calculations, both with MD at the same conditions. Finally, new RMI experiments with solid Cu validate our simulation-based model and infer Y~0.47 GPa for a 36 GPa shock

A reduced model for shock and detonation waves. II. The reactive case

We present a mesoscopic model for reactive shock waves, which extends a previous model proposed in [G. Stoltz, Europhys. Lett. 76 (2006), 849]. A complex molecule (or a group of molecules) is replaced by a single mesoparticle, evolving according to some Dissipative Particle Dynamics. Chemical reactions can be handled in a mean way by considering an additional variable per particle describing a rate of reaction. The evolution of this rate is governed by the kinetics of a reversible exothermic reaction. Numerical results give profiles in qualitative agreement with all-atom studies

The social affordances of flashpacking: exploring the mobility nexus of travel and communication

The proliferation of digital devices and online social media and networking technologies has altered the backpacking landscape in recent years. Thanks to the ready availability of online communication, travelers are now able to stay in continuous touch with friends, family and other travelers while on the move. This article introduces the practice of ‘flashpacking’ to describe this emerging trend and interrogates the patterns of connection and disconnection that become possible as corporeal travel and social technologies converge. Drawing on the concepts of ‘assemblages’ and ‘affordances’, we outline several aspects of this new sociality: virtual mooring, following, collaborating, and (dis)connecting. The conclusion situates this discussion alongside broader questions about the shifting nature of social life in an increasingly mobile and mediated world and suggests directions for future research at the intersection of tourism and technology

Vertical-external-cavity surface-emitting lasers and quantum dot lasers

The use of cavity to manipulate photon emission of quantum dots (QDs) has been opening unprecedented opportunities for realizing quantum functional nanophotonic devices and also quantum information devices. In particular, in the field of semiconductor lasers, QDs were introduced as a superior alternative to quantum wells to suppress the temperature dependence of the threshold current in vertical-external-cavity surface-emitting lasers (VECSELs). In this work, a review of properties and development of semiconductor VECSEL devices and QD laser devices is given. Based on the features of VECSEL devices, the main emphasis is put on the recent development of technological approach on semiconductor QD VECSELs. Then, from the viewpoint of both single QD nanolaser and cavity quantum electrodynamics (QED), a single-QD-cavity system resulting from the strong coupling of QD cavity is presented. A difference of this review from the other existing works on semiconductor VECSEL devices is that we will cover both the fundamental aspects and technological approaches of QD VECSEL devices. And lastly, the presented review here has provided a deep insight into useful guideline for the development of QD VECSEL technology and future quantum functional nanophotonic devices and monolithic photonic integrated circuits (MPhICs).Comment: 21 pages, 4 figures. arXiv admin note: text overlap with arXiv:0904.369