10 research outputs found
Recommended from our members
Multi-Satellite Orbit Determination Using Interferometric Observables with RF Localization Applications
Very long baseline interferometry (VLBI) specifically same-beam interferometry (SBI), and dual-satellite geolocation are two fields of research not previously connected. This is due to the different application of each field, SBI is used for relative interplanetary navigation of two satellites while dual-satellite geolocation is used to locate the source of a radio frequency (RF) signal. In this dissertation however, we leverage both fields to create a novel method for multi-satellite orbit determination (OD) using time difference of arrival (TDOA) and frequency difference of arrival (FDOA) measurements. The measurements are double differenced between the satellites and the stations, in so doing, many of the common errors are canceled which can significantly improve measurement precision.
Provided with this novel OD technique, the observability is first analyzed to determine the benefits and limitations of this method. In all but a few scenarios the measurements successfully reduce the covariance when examining the Cramér-Rao Lower Bound (CRLB). Reduced observability is encountered with geostationary satellites as their motion with respect to the stations is limited, especially when only one baseline is used. However, when using satellite pairs with greater relative motion with respect to the stations, even satellites that are close to, but not exactly in a geostationary orbit can be estimated accurately. We find that in a strong majority of cases the OD technique provides lower uncertainties and solutions far more accurate than using conventional OD observables such as range and range-rate while also not being affected by common errors and biases. We specifically examine GEO-GEO, GEO-MEO, and GEO-LEO dual-satellite estimation cases. The work is further extended by developing a relative navigation scenario where the chief satellite is assumed to have perfect knowledge, or some small amount of uncertainty considered but not estimated, while estimating the deputy satellite state with respect to the chief. Once again the results demonstrate that the TDOA and FDOA OD results are favorable with faster dynamics over classical measurements.
This dissertation not only explores the OD side, but also gaps in geolocation research. First the mapping of ephemeris uncertainty to the geolocation covariance to provide a more realistic covariance was implemented. Furthermore, the geolocation solution was improved by appending a probabilistic altitude constraint to the posterior covariance, significantly reducing the projected geolocation uncertainty ellipse. The feasibility of using the geolocation setup to passively locate a LEO satellite was also considered. Finally the simulated results were verified using a long-arc of real data. The use of FDOA for small-body navigation and gravity recovery was also examined as an extended application
OSIRIS-REx Orbit Determination Performance During the Navigation Campaign
The OSIRIS-REx mission Navigation Campaign consists of three sub-phases: Approach,Preliminary Survey, and Orbital A. Approach was designed for initial characterization ofBennu while matching Bennu's heliocentric velocity. Preliminary Survey provided the firstspacecraft-based estimate of Bennu's mass. This phase consisted of five target flybys witha close approach distance of about 7 km. Orbital A was a two-month phase devoted to theNavigation Team learning the close proximity operations dynamics and environment aroundBennu and transitioning from center-finding optical navigation to landmark feature-basednavigation. This paper provides a detailed summary of the orbit determination performancethroughout the Navigation Campaign
Early Navigation Performance of the OSIRIS-REx Approach to Bennu
The New Frontiers-class OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, Security-Regolith Explorer) mission is the first American endeavor to return a sample from an asteroid. In preparation for retrieving the sample, OSIRIS-REx is conducting a campaign of challenging proximity-operations maneuvers and scientific observations, bringing the spacecraft closer and closer to the surface of near-Earth asteroid (101955) Bennu. Ultimately, the spacecraft will enter a 900-meter-radius orbit about Bennu and conduct a series of reconnaissance flybys of candidate sample sites before being guided into contact with the surface for the Touch and Go sample collection event. Between August and December 2018, the OSIRIS-REx team acquired the first optical observations of Bennu and used them for navigation. We conducted a series of maneuvers with the main engine, Trajectory Correction Maneuver, and Attitude Control System thruster sets to slow the OSIRIS-REx approach to Bennu and achieve rendezvous on December 3, 2018. This paper describes the trajectory design, navigation conops, and key navigation results from the Approach phase of the OSIRIS-REx mission
Recommended from our members
Ephemeris and hazard assessment for near-Earth asteroid (101955) Bennu based on OSIRIS-REx data
Small bodies such as the near-Earth asteroid Bennu drift in their orbit due to thermal radiation forces (the Yarkovsky effect). Ground-based observations have indicated a nonzero probability of Bennu impacting Earth, depending on how its orbit evolves. Thus, among the goals of the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) mission to Bennu were to precisely measure the Yarkovsky effect and refine the impact hazard assessment for this body. Here we address these objectives. Using OSIRIS-REx spacecraft tracking data, we derive meter-level constraints on the distance between Earth and Bennu from January 2019 to October 2020. While these data greatly improve the knowledge of the trajectory of Bennu, they also require an unprecedented fidelity for the modeling of an asteroid’s trajectory. In particular, special care is needed to take into account the contribution of 343 small-body perturbers and the uncertainty in their masses. Radiation effects such as the Poynting–Robertson drag, so far only considered for interplanetary dust dynamics, now become a consideration for modeling the trajectory of a 500-m asteroid such as Bennu. By employing a thermophysical model based on OSIRIS-REx’s characterization of Bennu, we estimate a semimajor axis drift of−284.6 ± 0.2m/yr (signal-to-noise ratio∼1400) at epoch 2011 January 1 caused by the Yarkovsky effect. The largest source of modeling error is solar wind drag, which may lower the magnitude of the semimajor axis drift from the Yarkovsky effect by up to 0.16 m/yr. The Yarkovsky-related semimajor axis drift varies by roughly±1m/yr as the orbit of Bennu evolves due to planetary perturbations from 1900 to 2135. The Yarkovsky thermophysical model proves to be extremely accurate by predicting a bulk density estimate within 0.1% of that estimated through gravity science analysis. Compared to the information available before the OSIRIS-REx mission, the knowledge of the circumstances of the scattering Earth encounter that will occur in 2135 improves by a factor of 20, thus allowing us to rule out many previously possible impact trajectories. However, there remain some impact trajectories compatible with the data. Prior to the spacecraft encounter, the overall impact probability through 2200 was 3.7 × 10−4 (1 in 2700). As a result of our analysis, the cumulative impact probability through 2300 becomes 5.7 × 10−4 (1 in 1750) and the most significant individual impact solution is for September 2182, with an impact probability of 3.7 × 10−4 (1 in 2700). Both Bennu and (29075) 1950 DA have a Palermo scale value of −1.42 and share the distinction as the currently most hazardous object in the asteroid catalog
Het governancenetwerk van de Europese voetbalsport. Het introduceren van nieuwe governancebenaderingen om voetbal te sturen op EU-niveau
status: publishe
Het governancenetwerk van de Europese voetbalsport: Het introduceren van nieuwe goverancebenaderingen om voetbal te sturen op EU-niveau
Post-flight Evaluation of Lidar-based Digital Terrain Models for OSIRIS-REx Navigation at Bennu
The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft spent more than 2 yr characterizing near-Earth asteroid (101955) Bennu. The OSIRIS-REx Laser Altimeter (OLA) was responsible for producing the most accurate reconstruction of the asteroid’s surface—down to a global resolution of around 5 cm with a data precision of ±1.25 cm. However, the best-quality global OLA digital terrain model (DTM), version 21 (v21), was not available for navigation during proximity operations, nor was the utility of this model evaluated for processing images and altimeter data for navigation. The focus of this paper is the post-flight assessment of the final OLA v21 DTM, its performance for navigation-related analysis, and estimates of corrections needed for the DTM and measurement models. We created 15 cm resolution maplets for processing optical navigation (OpNav) data, and 5 cm resolution DTMs for processing altimeter data, to estimate a combined spacecraft trajectory over five phases of the mission. Our estimated corrections to the OLA instrument model produce altimeter data residuals with a precision of 7.12 cm (1 σ ; one standard deviation from the mean). The OpNav maplets produce image residuals at 0.2 px (1 σ ) and estimated landmark locations accurate to ±6 cm, outperforming DTM navigation-related performance requirements. Finally, our estimate of the global DTM scale is more precise and within 1.1 σ of previously reported values. We find that a slight discrepancy persists between the image and altimeter data, with image data suggesting that the DTM is too small by 0.049%, but nevertheless is exceptional for navigation
Stereophotoclinometry for OSIRIS-REx Spacecraft Navigation
We summarize a decade of effort by the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission team to build up the unique capabilities, processes, and procedures required to accomplish the unprecedented navigation performance required during proximity operations at asteroid (101955) Bennu. Stereophotoclinometry was a key technology used for digital terrain model (DTM) generation and landmark navigation, enabling estimation of spacecraft trajectories and Bennu’s geophysical parameters. We outline the concept of operations for OSIRIS-REx landmark navigation and the wide array of testing and verification efforts leading up to OSIRIS-REx’s arrival at Bennu. We relate the outcome of these efforts to the experiences during proximity operations. We discuss navigation and DTM performance during operations, including detailed lessons learned to carry forward for future missions