Development of Vibration Piezoelectric Harvesters by the Optimum Design of Cantilever Structures

Piezoelectric energy harvesting is a way of converting waste mechanical energy into usable electrical form. The selection of mechanical devices for conversion of mechanical to electrical energy is a significant part of vibration energy harvesting. The articles provide designing and optimization of a cantilever piezoelectric energy harvester. At first, is the selection of best mechanical device for energy harvesting application. A cantilever without proof mass is then analyzed for the selection of substrate, and piezoelectric material also plays a key role in the performance of the device. Aluminum is selected as a substrate, while zinc oxide acts as the piezoelectric layer. Addition of proof mass reduces the resonant frequency of the device to about 51 Hz as compared to 900 Hz for an aluminum cantilever beam. An electromechanical study shows an active conversion of mechanical input energy to electrical output energy. Power frequency response functions of the resultant structure are able to generate 0.47 mW power having 6.8 μA current at 1 g input acceleration

Variation of Sensitivity of a MEMS Capacitive Accelerometer Based Microphone with Suspension System Topology

The present research seeks to improve a highly sensitive MEMS capacitive accelerometer as a probable completely implantable hearing aid microphone. The research analyses the effect of different suspension system topologies on accelerometer efficiency. The topology of folded beam suspension is considered to be the most suitable for the proposed system. The design factors such as weight, height and resonant frequency are considered to make the accelerometer an effective biomedical system which can be completely implanted with COMSOL MULTIPHYSICS 4.2 the optimized system is simulated and validated. The accelerometer occupies 1mm2 of sensing area and achieves a nominal capacitance of 5.30 pF and an optimized capacitive sensitivity of 6.89fF

Electroceutical fabric lowers zeta potential and eradicates coronavirus infectivity upon contact

Coronavirus with intact infectivity attached to PPE surfaces pose significant threat to the spread of COVID-19. We tested the hypothesis that an electroceutical fabric, generating weak potential difference of 0.5 V, disrupts the infectivity of coronavirus upon contact by destabilizing the electrokinetic properties of the virion. Porcine respiratory coronavirus AR310 particles (105) were placed in direct contact with the fabric for 1 or 5 min. Following one minute of contact, zeta potential of the porcine coronavirus was significantly lowered indicating destabilization of its electrokinetic properties. Size-distribution plot showed appearance of aggregation of the virus. Testing of the cytopathic effects of the virus showed eradication of infectivity as quantitatively assessed by PI-calcein and MTT cell viability tests. This work provides the rationale to consider the studied electroceutical fabric, or other materials with comparable property, as material of choice for the development of PPE in the fight against COVID-19

Finite-element modeling of piezoelectric energy harvesters using lead-based and lead-free materials for voltage generation

Piezoelectric energy harvesters are capable of sensing mechanical vibrations and converting them into usable energy to empower low-power microsystems. In this work, a novel seesaw cantilever structure-based broadband piezoelectric energy harvester has been designed using both lead-based and lead-free piezoelectric material. It has been observed that along with its structure dimensions and piezo material properties, a harvester’s load also determines its performance. An optimum load would yield maximum harvester power. The optimum value of a resistor generating peak power has been described in this work. The harvester is capable of producing a peak power of around 23 mW across a 0.14 MΩ load