815 research outputs found
Balança de Kibble o de Watt
Postprint (published version
The electrical noise level of the hydrophone and its drift with the changed of the environment parameters
Peer Reviewe
Processament de perfils de precipitaciĂł obtinguts amb radar Doppler
[cat] En la actualitat les dades obtingudes amb instruments de teledetecciĂł (mesures obtingudes a distĂ ncia) formen una part essencial en l’à mbit de la meteorologia. Aquestes dades s’obtenen amb diversos sensors de tipus passiu (com els radiòmetres) o actiu (com els radars meteorològics) instal·lats a la superfĂcie terrestre, en avions o en satèl·lits. Els radars meteorològics destinats a observar precipitaciĂł operen tĂpicament en longituds d’ona de 3 a 10 cm (bandes X, C i S), realitzen escombrats d’antena en el pla horitzontal i proporcionen una valuosa informaciĂł del camp de precipitaciĂł en un radi de l’ordre de 100 km, de gran importĂ ncia en la vigilĂ ncia i predicciĂł meteorològica a curt termini. La seva posta a punt i manteniment tĂ© associat un cost no negligible. TambĂ© existeixen radars perfiladors, amb antena fixa apuntant el zenit, que proporcionen perfils verticals de precipitaciĂł amb gran resoluciĂł temporal i espacial. Aquests equips sovint sĂłn portables i mĂ©s econòmics, i permeten realitzar estudis dels processos microfĂsics que donen lloc a la precipitaciĂł, complementant la informaciĂł dels radars meteorològics tradicionals. Aquesta tesi es centra en el processament d’observacions de radars perfiladors, concretament en dos tipus d’equips diferents que mitjançant l’efecte Doppler, poden observar la velocitat terminal de caiguda de les partĂcules de precipitaciĂł. La tesi s’estructura en tres blocs i es presenta com a compendi de quatre articles cientĂfics.
El primer i segon bloc de la tesi es dediquen al perfilador Doppler conegut com Micro Rain Rada, que opera en banda K (longitud d’ona de 1.2 cm) i permet observar precipitaciĂł. Al primer bloc es proposa un processament de les dades brutes (reflectivitat espectral) del MRR que contempla diferents algoritmes per detectar pics meteorològics en el senyal, reducciĂł del soroll, i diverses millores per detectar de forma robusta moviments ascendents. A partir d’aquest processament inicial es calculen diversos parĂ metres derivats, que permeten estudiar la banda de fusiĂł o “banda brillant” amb una metodologia innovadora. Es presenta un estudi concret, aplicat a un MRR instal·lat a la Facultat de FĂsica de la Universitat de Barcelona al costat de l’estaciĂł de radiosondatge del Servei Meteorològic de Catalunya, que s’utilitza com a referència per a la caracteritzaciĂł de la banda brillant. La segona part Ă©s un altre estudi aplicat a observacions de MRR durant la campanya Cerdanya-2017 on es proposa una nova metodologia per a classificar diferents tipus de precipitaciĂł (com ara pluja, plugim, neu o calamarsa). La metodologia es verifica amb observacions independents de disdròmetre, model Parsivel, (instal·lat al costat del MRR), que proporciona una classificaciĂł automĂ tica de tipus de precipitaciĂł.
El tercer i darrer bloc de la tesi es centra en el processament d’observacions d’un perfilador de vent Doppler polsat de banda UHF (longitud d’ona d’uns 20 cm), model PCL1300 del fabricant francès Degreane. L’equip estĂ configurat per a funcionar amb cinc feixos per a optimitzar l’estimaciĂł de perfils de vent (components horitzontal i vertical). En aquest cas, com en els altres dos blocs anteriors, tambĂ© es proposa un processat de les dades brutes, però atenent la freqüència de treball, l’equip detecta tant moviments de l’aire com la presència de partĂcules de precipitaciĂł. El processament, a banda d’obtenir el perfil de vent, tambĂ© Ă©s capaç de detectar la precipitaciĂł i estimar el tipus de precipitaciĂł. Es presenta un estudi amb observacions d’un PCL1300 de MĂ©tĂ©o- France durant la campanya Cerdanya-2017, on tambĂ© s’usen dades de MRR i disdròmetre (Parsivel) per a contrastar la nova metodologia proposada.
El resultat de cada bloc abordat en aquesta tesis Ă©s un programari d’accĂ©s lliure, disponible al repositori GitHub, perquè la comunitat cientĂfica pugui reutilitzar-lo fĂ cilment en estudis posteriors.[eng] The first and second blocks of the thesis are devoted to the frequency modulated continuous wave (FMCW) vertically pointing Doppler radar profiler known as Micro Rain Radar from the German manufacturer Metek, which operates in K-band (wavelength of 1.2 cm) and allows precipitation observation. The first block proposes a processing of the raw data (spectral reflectivity) of the MRR that includes different algorithms to detect meteorological peaks in the signal, noise reduction, and several improvements to robustly detect upward movements of the air. From this initial processing, several derived parameters are calculated, which allow the study of the melting band or "bright band" with an innovative methodology. A specific study is presented, applied to a MRR installed at the Faculty of Physics of the University of Barcelona next to the radiosounding station of the Meteorological Service of Catalonia, which is used as a reference for the characterisation of the bright band. The second block is another study applied to MRR observations during the Cerdanya-2017 campaign.
The third and last block of the thesis focuses on the processing of observations from a UHF- band pulsed Doppler wind profiler (wavelength about 20 cm), model PCL1300 from the French manufacturer Degreane. The equipment is configured to operate with five beams to optimise the estimation of wind profiles (horizontal and vertical components). In this case, as in the other two previous blocks, processing of the raw data is also proposed, but taking into account the operating frequency, the equipment detects both air movements and the presence of precipitation. The processing, in addition to obtaining the wind profile, is also capable of detecting precipitation and estimating the type of precipitation. A study with observations from a PCL1300 wind profiler of Météo-France, during the Cerdagne-2017 campaign is presented, where MRR and disdrometer (Parsivel) data are also used to validate the new proposed methodology and also it has been used to validate the methodology in the first and second block.
The result of each block addressed in this thesis is an open access software, available in the GitHub repository
L’experiment del cub. Segona part:: cà lcul de la constant de Planick
Lligam entre la fĂsica quĂ ntica i les mesures macroscòpiquesPostprint (published version
Optical fibers to measure temperature vertical profile at sea
The paper is focus in the use the optical fiber to measure the temperature
in various heigh at the same time to get a temperature vertical variation. The
temperature measurements are puntual while the Bragg gratings located in the
fiber.Peer Reviewe
Underwater seismometer validation
This work verifies and validates the calibration in a marine geophone by
means of a hyperbaric chamber before and after the pressure underwater laboratory
test. The objective is to characterise the transfer function according to the
frequency of coupling between the geophone and the sediment. It is possible to observe
the geophone coupling variations through the sediment after the test inside
the water pressure at the equivalent of 200 metres depth.Peer Reviewe
Acoustic measurements
Peer Reviewe
Underwater seismometer validation
This work verifies and validates the calibration in a marine geophone by
means of a hyperbaric chamber before and after the pressure underwater laboratory
test. The objective is to characterise the transfer function according to the
frequency of coupling between the geophone and the sediment. It is possible to observe
the geophone coupling variations through the sediment after the test inside
the water pressure at the equivalent of 200 metres depth.Peer ReviewedPostprint (published version
- …