La bicicleta como transporte sostenible en México

De acuerdo a los datos publicados por el Banco Mundial (actualización 31 de octubre del 2012), México presentó una tendencia hacia la baja a pesar de esto, aún sigue siendo considerable sus emisiones de CO2 actualmente es de 3.98 ton per cápita. Esto contribuye al efecto invernadero y a su vez desequilibrios en nuestros ecosistemas. Siendo así uno de los eventos que aportan efectos al cambio climático. A partir de este planteamiento se busca llevar a cabo propuestas viables y que motiven a la creación de un sistema que sea respetuoso con el medio ambiente con un desarrollo económico local y eficientizar la infraestructura existente además de mejorar la imagen urbana así como promover la salud a través del uso de la bicicleta, así mismo tener una ciudad más competitiva con reducciones de emisiones de carbono que abone a la reducción del cambio climático. Para contribuir en su mitigación, se impulsa la realización del Plan de Movilidad Ciclista de Ensenada, con el fin de mejorar la calidad de vida de la población y mejorar las condiciones actuales de los problemas medioambientales al participar en la reducción de CO2 y promover el uso de la bicicleta como medio de transporte no motorizado. El proyecto, en su primera fase, consiste en retirar 166 aparcamientos dispuestos a lo largo del Boulevard Costero de la zona turística en aparcamientos públicos, y así usar este espacio para desarrollar una ruta de la ciclovía. Comprobamos que uno de los medios de transporte más vendidos en México (no así en el 2012) es el Nissan Tsuru 2008, por ser un auto económico y de bajo mantenimiento. Analizamos la emisión del CO2, considerándolo como un vehículo de rango medio en la eficiencia de emisión de gases contaminantes, y si consideramos que el 34.14% (como valor representativo) de los autos que ya no estarían estacionados en esa vialidad se sustituyen por uso de bicicleta, obtenemos que la reducción de emisiones de CO2 durante un año al implementar la primera fase del Plan de Movilidad Ciclista, es de 71,76 tonelada

On the use of sniffers for spectrum occupancy measurements of Bluetooth low energy primary channels

The methods usually employed to measure channel occupancy show limitations in the context of Bluetooth Low Energy (BLE) advertisements. We propose and analyze the use of BLE sniffers as light and portable low-cost spectrum occupancy meters to be used in scenarios where real time signal analyzers are not adequate. For the measurement technique to be successful, several low-level effects must be considered. The paper argues about on-air time, receiving blind times due to processing and intra system interference, buffer saturation and frequency anchoring. Hence, a compensation procedure based on collision rate estimation is proposed. Results with the refined method show that occupancies of 40% can be measured with an overestimation error whose percentile 95% is 5 percentage points. This is reduced to 1.9 points when the occupancy is 15%. The sniffers perform in real time and are shown to correctly track short term load variations. The strategy has been successfully used to characterize occupancy in highly variable and loaded scenarios such as subway platforms and a shopping mall. Values up to 25% have been observed, which implies a relevant packet error rate. Hence, the tool can be used to make agile audits and configure the parameters that control communication redundancy in new or existing networks

Reconstructing the parameter space of non-analytical cosmological fixed points

Dynamical system theory is a widely used technique in the analysis of cosmological models. Within this framework, the equations describing the dynamics of a model are recast in terms of dimensionless variables, which evolve according to a set of autonomous first-order differential equations. The fixed points of this autonomous set encode the asymptotic evolution of the model. Usually, these points can be written as analytical expressions for the variables in terms of the parameters of the model, which allows a complete characterization of the corresponding parameter space. However, a thoroughly analytical treatment is impossible in some cases. In this work, we give an example of a dark energy model, a scalar field coupled to a vector field in an anisotropic background, where not all the fixed points can be analytically found. Then, we put forward a general scheme that provides a numerical description of the parameter space. This allows us to find interesting accelerated attractors of the system with no analytical representation. This work may serve as a template for the numerical analysis of highly complicated dynamical systems.Comment: 13 pages, 13 figures, 1 table. Changes match the published versio

PSM-DMO: power save mode and discontinuous BLE mesh operation

The Bluetooth Low Energy (BLE) mesh profile, standardized by the Bluetooth Special Interest Group (SIG), has an increasing interest in IoT solutions. However, the standard assumes that relay and friend nodes should be continuously scanning the channel awaiting any incoming transmissions. This could be very inefficient in terms of energy consumption, particularly in application scenarios where the backbone of the mesh network cannot be powered and traffic is infrequent. Hence, we present a novel strategy, named PSM-DMO, that minimizes the scan periods and thus, significantly reduces the overall energy consumption of the mesh network. PSM-DMO is defined as a new and optional feature for the currently published BLE mesh specifications, coexists with the standard operation, and is implemented without modifying the core of the specification. The proposal, that ensures the reliability of the mesh operation, can be used in BLE sensor networks that can tolerate a certain transmission delay. PSM-DMO replaces the continuous scan by a periodic but asynchronous polling process whereby the relay and sink nodes interrogate their neighbors about the existence of data to receive or to retransmit through the network. Nodes only go into scan mode during the period of time the mesh network will be involved in the transmission and dissemination. This period is estimated by the node which is the source of data, it is announced to its neighbors and it is propagated consecutively by all the relay nodes until the destination. PSM-DMO allows a theoretical reduction in the energy consumption of relay nodes up to 99.24 %

Influence of gaseous pollutants and their synergistic effects on the aging of reflector materials for concentrating solar thermal technologies

ABSTRACT: Concentrating solar thermal technologies have experienced an important boost in the last few years. Besides the production of electricity, they are particularly useful for the supply of industrial process heat. The industrial atmospheres affecting these solar plants typically contain gaseous pollutants that are likely to promote corrosion on the components of the solar facility, specifically solar reflectors, thereby compromising their optimal performance and the overall system efficiency. Seven accelerated aging tests were designed to study the effects of three air pollutants (H2S, SO2 and NO2) on the durability of two commercially available reflector types (silvered glass and aluminum), both in single-gas tests and in multicomponent gas mixtures. Additionally, the same material types were exposed outdoors at five representative polluted sites, including industrial, urban and coastal environments. Reflectance and optical microscope monitoring corroborated which degree of corrosion was developed on a specific type of reflector in the different tests with gaseous pollutants, as well as the synergistic effects of gas combinations. For example, tests with sulfur were harmful for silvered-glass reflectors (up to a total of 16 corrosion spots), whereas aluminum was particularly affected by tests with NO2 (numerous micro spots of around 50 pm size). Moreover, comparisons of the corrosion patterns found in accelerated-aging and outdoor exposures revealed which laboratory test reproduced the different real polluted atmospheres in the most realistic way, which is the main goal of this work. For instance, the degradation found at Site 2 was reproduced by Test NO2+SO2, with an acceleration factor of 27.info:eu-repo/semantics/publishedVersio

Ensayos de envejecimiento acelerado de reflectores solares sometidos a radiación UV y corrosión

CIES2020 - XVII Congresso Ibérico e XIII Congresso Ibero-americano de Energia SolarRESUMEN: La energía termosolar de concentración desempeña un rol fundamental en la transición energética prevista para los próximos años. La generación energética de esta tecnología depende enormemente del comportamiento óptico de los reflectores; si éste se ve mermado, el rendimiento de toda la planta solar se verá afectado. En consecuencia, utilizar un reflector adecuado puede suponer la diferencia entre el éxito o el fracaso de un proyecto. Para ciertas aplicaciones de esta energía, es necesario situar la planta solar en zonas cercanas a la costa donde la corrosividad y la dosis de radiación UV son muy elevadas. Por lo tanto, es necesario evaluar la durabilidad de los reflectores en dichos ambientes. Para ello, se han expuesto varias muestras de reflectores en Almería (España) para identificar los principales mecanismos de degradación que tienen lugar en los materiales. Además, se han realizado con éxito varios ensayos de envejecimiento acelerado que reproducen adecuadamente los principales mecanismos de degradación observados en intemperie, pero en un tiempo mucho menor. En particular, se ensayaron en condiciones aceleradas tres tipos de reflectores para evaluar su durabilidad frente a la corrosión y degradación UV.ABSTRACT: Concentrating solar thermal energy plays a fundamental role in the energetic transition planned for the next years. The energetic generation of this technology hugely depends on the optical behavior of the solar reflectors; if it decreases, the performance of the whole solar plant will be affected. Consequently, the use of a proper reflector might suppose the difference between the success or the failure of a project. For some solar thermal energy applications, it is required to place the solar plant near to the coast where the corrosivity and the UV doses are extremely high. Hence, it is necessary to assess the durability of the reflectors in these climates. For that purpose, several reflector samples were exposed in Almería (Spain) in order to identify the main degradation mechanisms. Furthermore, various accelerated aging tests which suitably reproduce the degradation mechanisms observed in Almería in a short period of time, were carried out. In particular, the durability of three different reflector materials against the corrosion and the UV degradation was studied in accelerated aging conditions.info:eu-repo/semantics/publishedVersio

Reversión de sedantes agonistas alfa-2-adrenérgicos en el perro

En el presente Artículo de Revisión se aporta una información amplia sobre los productos de LISO más frecuente en la reversión de los efectos sedantes de los agonistas alfa-2-adrenérgicos empleados en el perro: xilacina, medetomidina y romifidina. Se refieren los detalles farmacológicos, dosificación, efectos y aplicaciones de los siguientes productos: yohimbina, 4-aminopiridina, doxapram y atipamezol

The Bulgeless Seyfert/LINER Galaxy NGC 3367: Disk, Bar, Lopsidedness and Environment

NGC3367 is a nearby isolated active galaxy that shows a radio jet, a strong bar and evidence of lopsidedness. We present a quantitative analysis of the stellar and gaseous structure of the galaxy disk and a search for evidence of recent interaction based on new UBVRI Halpha and JHK images and on archival Halpha Fabry-Perot and HI VLA data. From a coupled 1D/2D GALFIT bulge/bar/disk decomposition an (B/D ~ 0.07-0.1) exponential pseudobulge is inferred in all the observed bands. A NIR estimate of the bar strength = 0.44 places NGC 3367 bar among the strongest ones. The asymmetry properties were studied using (1) optical and NIR CAS indexes (2) the stellar (NIR) and gaseous (Halpha, HI) A_1 Fourier mode amplitudes and (3) the HI integrated profile and HI mean intensity distribution. While the average stellar component shows asymmetry values close to the average found in the Local Universe for isolated galaxies, the young stellar component and gas values are largely decoupled showing significantly larger A_1 mode amplitudes suggesting that the gas has been recently perturbed. Our search for (1) faint stellar structures in the outer regions (up to u_R ~ 26 mag arcsec^{-2}), (2) (Halpha) star-forming satellite galaxies and (3) regions with different colors (stellar populations) along the disk all failed. Such an absence is interpreted using recent numerical simulations to constrain a tidal event with an LMC like galaxy to some dynamical times in the past or to a current very low mass, gas rich accretion. We conclude that a cold accretion mode (gas and small/dark galaxies) may be responsible of the nuclear activity and peculiar (young stars and gas) morphology regardless of the highly isolated environment. Black hole growth in bulgeless galaxies may be triggered by cosmic smooth mass accretion.Comment: 27 pages, 12 figures, accepted for publication in The Astronomical Journa

Optimizing CIGB-300 intralesional delivery in locally advanced cervical cancer

Background:We conducted a phase 1 trial in patients with locally advanced cervical cancer by injecting 0.5 ml of the CK2-antagonist CIGB-300 in two different sites on tumours to assess tumour uptake, safety, pharmacodynamic activity and identify the recommended dose.Methods:Fourteen patients were treated with intralesional injections containing 35 or 70 mg of CIGB-300 in three alternate cycles of three consecutive days each before standard chemoradiotherapy. Tumour uptake was determined using 99 Tc-radiolabelled peptide. In situ B23/nucleophosmin was determined by immunohistochemistry.Results:Maximum tumour uptake for CIGB-300 70-mg dose was significantly higher than the one observed for 35 mg: 16.1±8.9 vs 31.3±12.9 mg (P=0.01). Both, AUC 24h and biological half-life were also significantly higher using 70 mg of CIGB-300 (P<0.001). Unincorporated CIGB-300 diffused rapidly to blood and was mainly distributed towards kidneys, and marginally in liver, lungs, heart and spleen. There was no DLT and moderate allergic-like reactions were the most common systemic side effect with strong correlation between unincorporated CIGB-300 and histamine levels in blood. CIGB-300, 70 mg, downregulated B23/nucleophosmin (P=0.03) in tumour specimens.Conclusion:Intralesional injections of 70 mg CIGB-300 in two sites (0.5 ml per injection) and this treatment plan are recommended to be evaluated in phase 2 studies.Fil: Sarduy, M. R.. Medical-surgical Research Center; CubaFil: García, I.. Centro de Ingeniería Genética y Biotecnología; CubaFil: Coca, M. A.. Clinical Investigation Center; CubaFil: Perera, A.. Clinical Investigation Center; CubaFil: Torres, L. A.. Clinical Investigation Center; CubaFil: Valenzuela, C. M.. Centro de Ingeniería Genética y Biotecnología; CubaFil: Baladrón, I.. Centro de Ingeniería Genética y Biotecnología; CubaFil: Solares, M.. Hospital Materno Ramón González Coro; CubaFil: Reyes, V.. Center For Genetic Engineering And Biotechnology Havana; CubaFil: Hernández, I.. Isotope Center; CubaFil: Perera, Y.. Centro de Ingeniería Genética y Biotecnología; CubaFil: Martínez, Y. M.. Medical-surgical Research Center; CubaFil: Molina, L.. Medical-surgical Research Center; CubaFil: González, Y. M.. Medical-surgical Research Center; CubaFil: Ancízar, J. A.. Centro de Ingeniería Genética y Biotecnología; CubaFil: Prats, A.. Clinical Investigation Center; CubaFil: González, L.. Centro de Ingeniería Genética y Biotecnología; CubaFil: Casacó, C. A.. Clinical Investigation Center; CubaFil: Acevedo, B. E.. Centro de Ingeniería Genética y Biotecnología; CubaFil: López Saura, P. A.. Centro de Ingeniería Genética y Biotecnología; CubaFil: Alonso, Daniel Fernando. Universidad Nacional de Quilmes; ArgentinaFil: Gómez, R.. Elea Laboratories; ArgentinaFil: Perea Rodríguez, S. E.. Center For Genetic Engineering And Biotechnology Havana; Cuba. Centro de Ingeniería Genética y Biotecnología; Cub