Martensitic transformation in V_3Si single crystal: ^51V NMR evidence for coexistence of cubic and tetragonal phases

The Martensitic transformation (MT) in A15 binary-alloy superconductor V_3Si is a second-order, displacive structural transition from cubic to tetragonal symmetry, at temperature T_m a few K above the superconducting transition temperature T_c = 17 K. Though studied extensively, the MT has not yet been conclusively linked with a transition to superconductivity, and remains relevant, e.g. due to renewed interest in soft phonon modes, while V_3Si continues to be of interest, e.g. due to similarities with Fe-As superconductors. Previous NMR studies on the MT in V_3Si have mainly been on powder samples, and with little emphasis on temperature dependence during the transformation. Here we study a high-quality single crystal, where quadrupolar splitting and Knight shift of NMR spectra for ^51V allowed us to distinguish between spectra from transverse chains of V as a function of temperature. Our data revealed that the MT is not abrupt, but rather there is a microscopic coexistence of untransformed cubic phase and transformed tetragonal phase over a few K below and above T_m, and that the Martensitic lengthening of one axis occurs predominantly in a plane perpendicular to the crystal growth axis, as twinned domains

On narrowing coated conductor film: emergence of granularity-induced field hysteresis of transport critical current

Critical current density Jc in polycrystalline or granular superconducting material is known to be hysteretic with applied field H due to the focusing of field within the boundary between adjacent grains. This is of concern in the so-called coated conductors wherein superconducting film is grown on a granular, but textured surface of a metal substrate. While previous work has mainly been on Jc determined using induced or magnetization currents, the present work utilizes transport current via an applied potential in strip geometry. It is observed that the effect is not as pronounced using transport current, probably due to a large difference in criterion voltage between the two types of measurements. However, when the films are narrowed by patterning into 200-, 100-, or 80-micron, the hysteresis is clearly seen, because of the forcing of percolation across higher-angle grain boundaries. This effect is compared for films grown on ion-beam-assisted-deposited (IBAD) YSZ substrate and those grown on rolling-assisted-biaxially-textures substrates (RABiTS) which have grains that are about ten times larger. The hysteresis is more pronounced for the latter, which is more likely to have a weak grain boundary spanning the width of the microbridge. This is also of concern to applications in which coated conductors will be striated in order to reduce of AC losses.Comment: text-only: 10 pages, plus 5 figures on 5 page

Properties of recent IBAD-MOCVD Coated Conductors relevant to their high field, low temperature magnet use

BaZrO3 (BZO) nanorods are now incorporated into production IBAD-MOCVD coated conductors. Here we compare several examples of both BZO-free and BZO-containing coated conductors using critical current (Ic) characterizations at 4.2 K over their full angular range up to fields of 31 T. We find that BZO nanorods do not produce any c-axis distortion of the critical current density Jc(theta) curve at 4.2 K at any field, but also that pinning is nevertheless strongly enhanced compared to the non-BZO conductors. We also find that the tendency of the ab-plane Jc(theta) peak to become cusp-like is moderated by BZO and we define a new figure of merit that may be helpful for magnet design - the OADI (Off-Axis Double Ic), which clearly shows that BZO broadens the ab-plane peak and thus raises Jc 5-30{\deg} away from the tape plane, where the most critical approach to Ic occurs in many coil designs. We describe some experimental procedures that may make critical current Ic tests of these very high current tapes more tractable at 4.2 K, where Ic exceeds 1000 A even for 4 mm wide tape with only 1 micron thickness of superconductor. A positive conclusion is that BZO is very beneficial for the Jc characteristics at 4.2 K, just as it is at higher temperatures, where the correlated c-axis pinning effects of the nanorods are much more obvious

Theoretical Description of Nearly Discontinuous Transition in Superconductors with Paramagnetic Depairing

Based on a theoretical argument and Monte Carlo simulations of a Ginzburg-Landau model derived microscopically, it is argued that, in type-II superconductors where {\it both} the paramagnetic {\it and} orbital depairings are important, a strong first-order transition (FOT) at $H_{c2}$ expected in the mean field (MF) approximation never occurs in real systems and changes due to the fluctuation into a crossover. The present result explains why a {\it nearly} discontinuous crossover at $H_{c2}$ with {\it no} intrinsic hysteresis is observed only in a clean superconducting material with a singlet pairing and a high condensation energy such as CeCoIn$_5$.Comment: Publication version. See cond-mat/0306060 regarding a corresponding long pape

Through-thickness superconducting and normal-state transport properties revealed by thinning of thick film ex situ YBa2Cu3O7-x coated conductors

A rapid decrease in the critical current density (Jc) of YBa2Cu3O7-x (YBCO) films with increasing film thickness has been observed for multiple YBCO growth processes. While such behavior is predicted from 2D collective pinning models under certain assumptions, empirical observations of the thickness dependence of Jc are believed to be largely processing dependent at present. To investigate this behavior in ex situ YBCO films, 2.0 and 2.9 um thick YBCO films on ion beam assisted deposition (IBAD) - yttria stabilized zirconia (YSZ) substrates were thinned and repeatedly measured for rho(T) and Jc(H). The 2.9 um film exhibited a constant Jc(77K,SF) through thickness of ~1 MA/cm2 while the 2.0 um film exhibited an increase in Jc(77K,SF) as it was thinned. Neither film offered evidence of significant dead layers, suggesting that further increases in critical current can be obtained by growing thicker YBCO layers.Comment: To appear in Applied Physics Letter

Growth of superconducting Hg-1212 very-thin films

High quality epitaxial HgBa2CaCu2O6+delta (Hg- High 1212) films with thickness less than 100 nm have been successfully synthesized using cation-exchange process. The films show the superconducting transition up to similar to 118 K which is close to the intrinsic value of 124 K for Hg-1212 phase, and critical current densities up to 1.1x10(7)A/cm(2) at 5 K, 1.14x10(6)A/cm(2) at 77 K and 2.59x10(5)A/cm(2) at 100 K in zero field

Flux quanta driven by high-density currents in low-impurity V3Si and LuNi2B2C: free flux flow and flux-core size effect

High density direct currents (DC) are used to drive flux quanta via the Lorentz force towards a highly ordered "free flux flow" (FFF) dynamic state, made possible by the weak-pinning environment of high-quality, single-crystal samples of two low-Tc superconducting compounds, V3Si and LuNi2B2C. We report the effect of the magnetic field-dependent fluxon core size on flux flow resistivity rho_f. Much progress has been made in minimizing the technical challenges associated with the use of high currents. Attainment of a FFF phase is indicated by the saturation at highest currents of flux-flow dissipation levels that are well below the normal state resistance and have field-dependent values. The field dependence of the corresponding rho_f is shown to be consistent with a prediction based on a model for the decrease of flux core size at higher fields in weak-coupling BCS s-wave materials.Comment: More empirical treatment of the magnetoresistive correction of V3Si data by additional measurement and analysis (involving two new coauthors, Favreau and Henderson). End result is the same, making for a stronger manuscrip

Magnetotransport in the Normal State of La1.85Sr0.15Cu(1-y)Zn(y)O4 Films

We have studied the magnetotransport properties in the normal state for a series of La1.85Sr0.15Cu(1-y)Zn(y)O4 films with values of y, between 0 and 0.12. A variable degree of compressive or tensile strain results from the lattice mismatch between the substrate and the film, and affects the transport properties differently from the influence of the zinc impurities. In particular, the orbital magnetoresistance (OMR) varies with y but is strain-independent. The relations for the resistivity and the Hall angle and the proportionality between the OMR and tan^2 theta are followed about 70 K. We have been able to separate the strain and impurity effects by rewriting the above relations, where each term is strain-independent and depends on y only. We also find that changes in the lattice constants give rise to closely the same fractional changes in other terms of the equation.The OMR is more strongly supressed by the addition of impurities than tan^2 theta. We conclude that the relaxation ratethat governs Hall effect is not the same as for the magnetoresistance. We also suggest a correspondence between the transport properties and the opening of the pseudogap at a temperature which changes when the La-sr ratio changes, but does not change with the addition of the zinc impurities

Loss of ATM kinase activity leads to embryonic lethality in mice

Ataxia telangiectasia (A-T) mutated (ATM) is a key deoxyribonucleic acid (DNA) damage signaling kinase that regulates DNA repair, cell cycle checkpoints, and apoptosis. The majority of patients with A-T, a cancer-prone neurodegenerative disease, present with null mutations in Atm. To determine whether the functions of ATM are mediated solely by its kinase activity, we generated two mouse models containing single, catalytically inactivating point mutations in Atm. In this paper, we show that, in contrast to Atm-null mice, both D2899A and Q2740P mutations cause early embryonic lethality in mice, without displaying dominant-negative interfering activity. Using conditional deletion, we find that the D2899A mutation in adult mice behaves largely similar to Atm-null cells but shows greater deficiency in homologous recombination (HR) as measured by hypersensitivity to poly (adenosine diphosphate-ribose) polymerase inhibition and increased genomic instability. These results may explain why missense mutations with no detectable kinase activity are rarely found in patients with classical A-T. We propose that ATM kinase-inactive missense mutations, unless otherwise compensated for, interfere with HR during embryogenesis