48 research outputs found

    Thermodiffusion in model nanofluids by molecular dynamics simulations

    Full text link
    In this work, a new algorithm is proposed to compute single particle (infinite dilution) thermodiffusion using Non-Equilibrium Molecular Dynamics simulations through the estimation of the thermophoretic force that applies on a solute particle. This scheme is shown to provide consistent results for simple Lennard-Jones fluids and for model nanofluids (spherical non-metallic nanoparticles + Lennard-Jones fluid) where it appears that thermodiffusion amplitude, as well as thermal conductivity, decrease with nanoparticles concentration. Then, in nanofluids in the liquid state, by changing the nature of the nanoparticle (size, mass and internal stiffness) and of the solvent (quality and viscosity) various trends are exhibited. In all cases the single particle thermodiffusion is positive, i.e. the nanoparticle tends to migrate toward the cold area. The single particle thermal diffusion 2 coefficient is shown to be independent of the size of the nanoparticle (diameter of 0.8 to 4 nm), whereas it increases with the quality of the solvent and is inversely proportional to the viscosity of the fluid. In addition, this coefficient is shown to be independent of the mass of the nanoparticle and to increase with the stiffness of the nanoparticle internal bonds. Besides, for these configurations, the mass diffusion coefficient behavior appears to be consistent with a Stokes-Einstein like law

    Thermodiffusion in multicomponent n-alkane mixtures

    Get PDF
    Compositional grading within a mixture has a strong impact on the evaluation of the pre-exploitation distribution of hydrocarbons in underground layers and sediments. Thermodiffusion, which leads to a partial diffusive separation of species in a mixture due to the geothermal gradient, is thought to play an important role in determining the distribution of species in a reservoir. However, despite recent progress, thermodiffusion is still difficult to measure and model in multicomponent mixtures. In this work, we report on experimental investigations of the thermodiffusion of multicomponent n-alkane mixtures at pressure above 30 MPa. The experiments have been conducted in space onboard the Shi Jian 10 spacecraft so as to isolate the studied phenomena from convection. For the two exploitable cells, containing a ternary liquid mixture and a condensate gas, measurements have shown that the lightest and heaviest species had a tendency to migrate, relatively to the rest of the species, to the hot and cold region, respectively. These trends have been confirmed by molecular dynamics simulations. The measured condensate gas data have been used to quantify the influence of thermodiffusion on the initial fluid distribution of an idealised one dimension reservoir. The results obtained indicate that thermodiffusion tends to noticeably counteract the influence of gravitational segregation on the vertical distribution of species, which could result in an unstable fluid column. This confirms that, in oil and gas reservoirs, the availability of thermodiffusion data for multicomponent mixtures is crucial for a correct evaluation of the initial state fluid distribution

    Isomorphs in model molecular liquids

    Get PDF
    Isomorphs are curves in the phase diagram along which a number of static and dynamic quantities are invariant in reduced units. A liquid has good isomorphs if and only if it is strongly correlating, i.e., the equilibrium virial/potential energy fluctuations are more than 90% correlated in the NVT ensemble. This paper generalizes isomorphs to liquids composed of rigid molecules and study the isomorphs of two systems of small rigid molecules, the asymmetric dumbbell model and the Lewis-Wahnstrom OTP model. In particular, for both systems we find that the isochoric heat capacity, the excess entropy, the reduced molecular center-of-mass self part of the intermediate scattering function, the reduced molecular center-of-mass radial distribution function to a good approximation are invariant along an isomorph. In agreement with theory, we also find that an instantaneous change of temperature and density from an equilibrated state point to another isomorphic state point leads to no relaxation. The isomorphs of the Lewis-Wahnstrom OTP model were found to be more approximative than those of the asymmetric dumbbell model, which is consistent with the OTP model being less strongly correlating. For both models we find "master isomorphs", i.e., isomorphs have identical shape in the virial/potential energy phase diagram.Comment: 20 page

    European Space Agency experiments on thermodiffusion of fluid mixtures in space

    Get PDF
    Abstract.: This paper describes the European Space Agency (ESA) experiments devoted to study thermodiffusion of fluid mixtures in microgravity environment, where sedimentation and convection do not affect the mass flow induced by the Soret effect. First, the experiments performed on binary mixtures in the IVIDIL and GRADFLEX experiments are described. Then, further experiments on ternary mixtures and complex fluids performed in DCMIX and planned to be performed in the context of the NEUF-DIX project are presented. Finally, multi-component mixtures studied in the SCCO project are detailed

    Excess-entropy scaling in supercooled binary mixtures

    Get PDF
    Supercooled liquids near the glass transition show remarkable non-Arrhenius transport phenomena, whose origin is yet to be clarified. Here, the authors use GPU molecular dynamics simulations for various binary mixtures in the supercooled regime to show the validity of a quasiuniversal excess-entropy scaling relation for viscosity and diffusion

    SM of Noble Gas Solubility in Oil

    No full text
    This files contains all data used and computed in the following article "Modeling Solubility Induced Elemental Fractionation of Noble Gases in Oils"THIS DATASET IS ARCHIVED AT DANS/EASY, BUT NOT ACCESSIBLE HERE. TO VIEW A LIST OF FILES AND ACCESS THE FILES IN THIS DATASET CLICK ON THE DOI-LINK ABOV

    Molecular simulation of the viscosity of asymmetric dense mixtures

    No full text
    The shear viscosity of asymmetric, binary mixtures, consisting of small and long-chain molecules, was computed by means of reversed non-equilibrium molecular dynamics simulations. The molecules were modelled as flexible chains of tangent spheres that interact through a combination of site–site Lennard-Jones (LJ) 12-6 intermolecular forces. The calculations were performed in order to elucidate the mechanisms responsible for the experimentally observed marked decrease in the viscosity of a fluid consisting of large molecules, on addition of lighter species. The simulations of pure species indicate that the chains exhibit a range of configurational shapes, but are in general quite folded, even in a dilute state, when there are no other chains or monomers present; the average radius of gyration of a particular chain is nearly temperature independent and only weakly dependent on density. Analysis of the behaviour of the chains with the different number of segments indicates that the resulting viscosity is proportional to the square root of their moment of inertia. The simulations carried out on the binary mixture, consisting of a monomer and a 16-segment chain species, indicate that the viscosity decrease can be broadly attributed to density, mixing and structural effects. The decrease in density and mixing effects led to a large decrease in viscosity, primarily dominated by the effect of mixing the two species. The structural changes resulted in an increase in viscosity, as the presence of monomers led to configurational relaxation of hexadecamer and to a localization of monomers in the vicinity of the hexadecamers

    Comparative experimental and modeling studies of the viscosity behavior of ethanol+C7 hydrocarbon mixtures versus pressure and temperature

    No full text
    International audienceThe viscosity of the binary system ethanol + n-heptane has been measured with a falling-body viscometer for seven compositions as well as for the pure compounds in the temperature range 293.15-353.15 K and up to 100 MPa with an experimental uncertainty of ±2%. At 0.1 MPa, the viscosity has been measured with a classical capillary viscometer (Ubbelohde) with an uncertainty of ±1%. A total of 208 experimental data points are reported. The viscosity behavior of this binary system is interpreted as the results of changes in the free volume, and the breaking or weakening of hydrogen bonds. The excess activation energy for viscous flow of the mixtures is negative with a maximum absolute value of 0.3 kJ mol-1, indicating a very weakly interacting system. The data of this binary system as well as those recently measured for ethanol + toluene have been used to study the performance of some viscosity models with a physical and theoretical background. The evaluated models are based on the hard-sphere scheme, the concepts of the free-volume and the friction theory, and a model derived from molecular dynamics. In addition to these models, the simple compositional models by Grunberg-Nissan and Katti-Chaudhri have also been applied. Overall a satisfactory representation of the viscosity of these two binary ethanol + C7 hydrocarbon systems is found for the different models within the considered T, P range taking into account their simplicity
    corecore