Y-stent-assisted coil embolization of anterior circulation aneurysms using two solitaire AB devices: a single enter experience

Wide-neck intracranial aneurysms remain a challenge to endovascular treatment. We describe our experience in repairing wide-neck aneurysms of the anterior circulation located at arterial branch points using coil embolization assisted by Y-stenting using two Solitaire® stents. Six wide-neck intracranial aneurysms located on the middle cerebral artery bifurcation 3, pericallosal artery 1, and anterior communicating artery 2 were repaired by Y-stent-assisted coil embolization using two Solitaire® stents. Four cases were incidental findings of aneurysm and two cases were previously treated ruptured aneurysms that had undergone recanalization. All the cases were successfully treated without complications. Follow-up by digital subtraction angiography and magnetic resonance angiography at six months showed the stents to be patent with no recanalization of the aneurysm sacs. Repairing wide-neck aneurysms of the anterior circulation by Y-stent-assisted coil embolization using two Solitaire® stents is a simple and safe method of treating complex aneurysms. While the results are promising, larger series with longer term follow-ups are needed to corroborate that this treatment method is superior to other technique

Photocatalytic hydrogen production performance of 1-D ZnO nanostructures : role of structural properties

Synthesis of zinc oxide (ZnO) nanowires (NWs) grown via vapor-liquid-solid (VLS) process using Gold (Au) as a catalyst metal on aluminum-doped zinc oxide (AZO) seed layer is reported in the present work. During the growth procedure, the nucleation process helps us to obtain ZnO nanowires with Au on the tip, confirming the VLS growth mechanism. Different morphologies were obtained after the variation in the growth parameters in the VLS process, and further, their role in the photocatalytic performance was studied. Changes in the structural properties of nanowires allowed us to modify the aspect ratio and surface area of the nanostructures. X-ray diffraction (XRD) showed that the principal orientation of the nanowires was (002) in the present case. Scanning electron microscopy (SEM) showed the structural properties of 1-D nanostructures (nanowires), and statistical analysis revealed that the average diameter in the present case was found to be varied from 57 to 85 nm. Scanning transmission electron microscopy (STEM) technique revealed the different elements present on the surface of ZnO NWs. Further, the compositional profile of nanostructures was cross-verified using Energy dispersive Spectroscopy (EDS). Photoluminescence (PL) and UV Visible studies were employed to study the optical properties of nanowires. UV–Vis measurements showed the role of different structural properties of nanowires on the absorption spectra, especially in the visible region. The ZnO nanowires were tested as photocatalysts for hydrogen production from water splitting reaction, and it was found in particular nanowires with random orientation with optimal diameter distribution show the stable and highest photocatalytic performance

Zinc associated nanomaterials and their intervention in emerging respiratory viruses: Journey to the field of biomedicine and biomaterials.

Respiratory viruses represent a severe public health risk worldwide, and the research contribution to tackle the current pandemic caused by the SARS-CoV-2 is one of the main targets among the scientific community. In this regard, experts from different fields have gathered to confront this catastrophic pandemic. This review illustrates how nanotechnology intervention could be valuable in solving this difficult situation, and the state of the art of Zn-based nanostructures are discussed in detail. For virus detection, learning from the experience of other respiratory viruses such as influenza, the potential use of Zn nanomaterials as suitable sensing platforms to recognize the S1 spike protein in SARS-CoV-2 are shown. Furthermore, a discussion about the antiviral mechanisms reported for ZnO nanostructures is included, which can help develop surface disinfectants and protective coatings. At the same time, the properties of Zn-based materials as supplements for reducing viral activity and the recovery of infected patients are illustrated. Within the scope of noble adjuvants to improve the immune response, the ZnO NPs properties as immunomodulators are explained, and potential prototypes of nanoengineered particles with metallic cations (like Zn2+) are suggested. Therefore, using Zn-associated nanomaterials from detection to disinfection, supplementation, and immunomodulation opens a wide area of opportunities to combat these emerging respiratory viruses. Finally, the attractive properties of these nanomaterials can be extrapolated to new clinical challenges

Zinc associated nanomaterials and their intervention in emerging respiratory viruses:Journey to the field of biomedicine and biomaterials

Respiratory viruses represent a severe public health risk worldwide, and the research contribution to tackle the current pandemic caused by the SARS-CoV-2 is one of the main targets among the scientific community. In this regard, experts from different fields have gathered to confront this catastrophic pandemic. This review illustrates how nanotechnology intervention could be valuable in solving this difficult situation, and the state of the art of Zn-based nanostructures are discussed in detail. For virus detection, learning from the experience of other respiratory viruses such as influenza, the potential use of Zn nanomaterials as suitable sensing platforms to recognize the S1 spike protein in SARS-CoV-2 are shown. Furthermore, a discussion about the antiviral mechanisms reported for ZnO nanostructures is included, which can help develop surface disinfectants and protective coatings. At the same time, the properties of Zn-based materials as supplements for reducing viral activity and the recovery of infected patients are illustrated. Within the scope of noble adjuvants to improve the immune response, the ZnO NPs properties as immunomodulators are explained, and potential prototypes of nanoengineered particles with metallic cations (like Zn(2+)) are suggested. Therefore, using Zn-associated nanomaterials from detection to disinfection, supplementation, and immunomodulation opens a wide area of opportunities to combat these emerging respiratory viruses. Finally, the attractive properties of these nanomaterials can be extrapolated to new clinical challenges

Synthesis, characterization and electrical properties of quaternary selenodiphosphates: AMP2SE6 with A = Cu, Ag and M = Bi, Sb

The new quaternary selenophosphate phases AMP2Se6 (A = Cu, Ag and M = Bi, Sb) were synthesized by ceramic methods at 1023 K. These phases were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray analysis (EDX) and a.c. and d.c. electrical conductivity measurements. The phases all show values of electrical conductivity, σ, of about 10-4 Ω-1 cm-1 at 303 K and photoconductive effect. The conductivity is nearly five orders of magnitude larger than that of related phases. © 2003 Elsevier Science Ltd. All rights reserved

Crystal structure, Raman scattering and magnetic properties of CuCr2− xZrxSe4 and CuCr2− xSnxSe4 selenospinels

International audienceSelenospinels, CuCr2− xMxSe4 (M = Zr and Sn), were synthesized via conventional solid-state reactions. The crystal structure of CuCr1.5Sn0.5Se4, CuCr1.7Sn0.3Se4, CuCr1.5Zr0.5Se4, and CuCr1.8Zr0.2Se4 were determined using single-crystal X-ray diffraction. All the phases crystallized in a cubic spinel-type structure. The chemical compositions of the single-crystals were examined using energy-dispersive X-ray analysis (EDS). Powder X-ray diffraction patterns of CuCr1.3Sn0.7Se4 and CuCr1.7Sn0.3Se4 were consistent with phases belonging to the Fd3¯m Space group. An analysis of the vibrational properties on the single-crystals was performed using Raman scattering measurements. The magnetic properties showed a spin glass behavior with increasing Sn content and ferromagnetic order for CuCr1.7Sn0.3Se4. © 201

Crystal structure of isotetrandrine, C38H42N2O6

C38H42N2O6, orthorhombic, P212121 (no. 19), α = 12.024(2) Å, b = 15.637(2) Å, c = 17.553(3) Å, V= 3300.2 Å3, Z = 4, Rgt(F) = 0.041, wRref(F2) = 0.109, T= 293 K. © 2014, Oldenbourg Wissenschaftsverlag München. All rights reserved

Vibrational and optical properties of CZTS derivatives for photovoltaic applications: Synthesis of Cu2ZnSn1-xGexS2Se2 compounds

© 2018 Elsevier Masson SAS Herein, we report the vibrational and optical properties of new Cu2ZnSn1-xGexS2Se2 solid solutions prepared by isomorphic substitution of a fraction of Se by S in Cu2ZnSn1-xGexSe4 (CZTGeSe) through ceramic method. The Raman spectra and x-ray diffraction analysis on samples confirms that they crystallize in Kesterite-type structure. The Raman peaks were analyzed by fitting of the spectra allowing identification the vibrational modes by comparison with experimental and theoretical data from CZTGeSe and CZTGeS end-members. The dependency between the amount of cation and chalcogen substituent in optical characterization shows band gap around of 1.36 eV, close to the optimum value for solar cells with high efficiency

Crystal structure and magnetic properties of titanium-based CuTi2−xMxS4 and CuCr2−xTixSe4 chalcospinels

International audienceCuTi2−xMxS4 (M=Fe, Mn, Co; x=0.3, 0.5) and CuCr2−xTixSe4 (x=0.3, 0.5, 0.7) chalcospinels were synthesized by conventional solid-state reactions. Their crystal structures were determined by single-crystal X-ray diffraction. All of the phases crystallized in cubic spinel-type structures (space group, F d 3 ¯ m ). For all of the chalcospinel compounds, the edge-length distortion parameter (ELD) indicated that the most distorted polyhedron was Q[(Ti,M)3Cu], which displayed an ~8% distortion from an ideal tetrahedron structure (Q=S or Se). The Mn-based thiospinel CuMn0.3Ti1.7S4 is paramagnetic, whereas the Fe-based thiospinels (CuTi2−xFexS4; x=0.3 and 0.7) are strongly antiferromagnetic due to their spin-glass states. The magnetic susceptibility measurements indicated ferromagnetic behavior for the selenospinels (CuCr2−xTixSe4; x=0.3, 0.5 and 0.7)

Crystal structure of potassium bismuth hexathiodiphosphate, KBiP 2S6

BiKP2S6, monoclinic, P1211 (No. 4), a = 6.6200(6) Å, b = 7.4058(7) Å, c = 9.9002(9) Å, β = 92.108(1)°, V= 485.0 Å3, Z = 2, Rgt(F) = 0.027, wRref(F2) = 0.060, T = 293 K. © by Oldenbourg Wissenschaftsverlag