Cosimo De Giorgi e l'Abruzzo: ricerche geologiche e sismologiche tra 1876 e 1887

EnDe Giorgi's scientific activity in Abruzzi is mainly related to the geological surveys in the second half of the 1870s and to the involvement in the discussion about seismology in 1887, during the First Geodynamic Congress held in L'Aquila. Two scientific contributions on Bollettino del Regio Comitato Geologico d'Italia, published in 1877 and 1878 respectively, summarize the activity of 1870s. The former is related to geological investigations in the Pescara and Aterno river valleys, while the latter is the report of surveys in the area of Campo Imperatore (Gran Sasso chain) for the identification of lignite seams and bituminous schists potentially exploitable for industrial purposes. The work De Giorgi made at L'Aquila in 1887 is summarized in the text of the closing conference at the Geodynamic Congress, which gave him the opportunity to address arguments of overriding importance for Seismology at that time. Some of the points in De Giorgi's discussion are still relevant today, as the earthquake prediction and the defense against the seismic damage by using appropriate building techniques. In the whole, summaries of the performed activities, considerations and conclusions reported in the publications give us the image of De Giorgi as a cutting-edge researcher, a leading representative of Earth Sciences in the second half of the 19th century, for both the methodological approach and the deep knowledge of the theories governing geology and seismology at that time.ItL'attività scientifica di De Giorgi in Abruzzo è principalmente legata alle indagini geologiche nella seconda metà degli anni Settanta dell'Ottocento e all'impegno nel campo della sismologia in occasione del Primo Congresso Geodinamico, svoltosi all'Aquila nel 1887. Delle ricerche degli anni Settanta sono testimonianza due note pubblicate sul Bollettino del Regio Comitato Geologico d'Italia nel 1877 e nel 1878, la prima relativa a osservazioni nelle valli dei fiumi Pescara e Aterno, la seconda esito dei rilevamenti per scopi giacimentologici nella zona di Campo Imperatore. L'attività del 1887 all'Aquila è invece riassunta nel testo della conferenza di chiusura del Congresso Geodinamico, in cui vengono affrontati temi prioritari per la sismologia dell'epoca, per certi aspetti ancora attuali, come la previsione dei terremoti e la prevenzione rispetto ai potenziali danni dovuti allo scuotimento sismico, mediante l'adozione di adeguate tecniche costruttive. In tutti i casi, le sintesi delle attività svolte, le riflessioni e le conclusioni nelle pubblicazioni ci restituiscono l'immagine di De Giorgi ricercatore raffinato e moderno, per metodi adottati e conoscenza dell'apparato teorico dell'epoca, vero rappresentante di spicco della comunità di studiosi delle Scienze della Terra nella seconda metà dell'Ottocento

The 346 A.D. earthquake( Central-Southern Italy): an archaeoseismological approach

The 346 A.D. earthquake is known through sparse historical sources. It is mentioned by Hyeronimus as felt in Rome and responsible for damage in the ancient Campania Province. Four epigraphs report the earthquake as the cause for the restorations of buildings at Aesernia-Isernia, Allifae-Alife, Telesia-Telese and Saepinum-Sepino. On this basis, an area possibly struck by the earthquake was already defined in the literature. Another seventeen epigraphs mentioning restoration or re-building of edifices in localities of central-southern Italy (without explicitly referring to the earthquake as the cause of the damage) are possibly related to the earthquake effects. We tried to enhance our knowledge on the 346 earthquake through archaeoseismological analyses. The investigation has benefited from specific fieldwork during archaeological excavations and a critical review of the available archaeological literature. However, a correct archaeoseismological interpretation is hindered by the occurrence of two earthquakes (346 and 375 A.D.) in a short time span and in adjacent areas (whose effects may be archaeo-chronologically undistinguishable) and the not always univocal evidence of the seismic origin of the detected collapses or restoration of structures. For this reason we propose a representation of the 346 A.D. effects through two extreme pictures: 1) the localities for which conclusive data on the earthquake effects are available and 2) the data of point 1 plus the localities for which archaeoseismological data consistent with the earthquake are available. The latter view defines an area of possible damage related to the 346 event larger than that previously known. In particular, the earthquake damage may result from a seismic sequence similar to that, which struck a part of the central and the southern Apennines in 1456, or from an event comparable to that which occurred in 1805, responsible for widespread damage in the northern sector of the southern Apennines

Paleoseismology of silent faults in the Central Apennines (Italy): the Campo Imperatore Fault (Gran Sasso Range Fault System)

Paleoseismological analyses were performed along the Campo Imperatore Fault (part of the Gran Sasso Range Fault System) in order to define the seismogenic behaviour (recurrence interval for surface faulting events, elapsed time since the last activation, maximum expected magnitude). Four trenches were excavated across secondary faults which are related to the main fault zone. The youngest event (E1) occurred after 3480-3400 years BP; a previous event (E2) occurred between 7155-7120/7035-6790 years BP and 5590-5565/5545-5475 years BP, while the oldest one (E3) has a Late Pleistocene age. The chronological interval between the last two displacement events ranges between 1995 and 6405 years. The minimum elapsed time since the last activation is 800 years, due to the absence of historical earthquakes which may have been caused by the Campo Imperatore Fault and based on the completeness of the historical catalogues for the large magnitude events in the last eight centuries. Based on the length of the fault surficial expression, earthquakes with M 6.95 may be expected from the activation of the entire Gran Sasso Range Fault System. The effects of the fault activation were investigated through the simulation of a damage scenario obtained by means of the FaCES computer code, made by the National Seismic Survey for civil protection purposes. The damage scenario shows that the activation of the Gran Sasso Range Fault System may be responsible for an earthquake with epicentral intensity I0 10.5 MCS, with a number of collapsed buildings ranging between 7900 and 31100 and a number of damaged buildings ranging between 99 000 and 234 000. The investigated case defines, therefore, a high risk level for the region affected by the Campo Imperatore Fault

Shallow subsurface geology and seismic microzonation in a deep continental basin. The Avezzano Town, Fucino basin (central Italy)

We present detailed geological investigations aimed at the reconstruction of the shallow subsurface geology, and associated local seismic hazard, of the Avezzano town in the Quaternary Fucino basin (central Apennines). This work shows a basic (Level 1) seismic microzonation (SM) of the Avezzano town, focusing the attention on geologic constraints. We also discuss some methodological procedures of SM. Level 1 SM involves a reconstruction of the subsurface geological model achieved by a multidisciplinary approach synthesized in two main thematic maps and geologic sections. The first map, containing essential geologic information, is formed by overlapping layers (geological units, litho-technical units, and geomorphological/structural features). The second map is a summary map, easily accessible to non-geologist earthquake scientists/technicians, which synthesizes surface geology, subsurface data and resonance frequencies into homogeneous microzones. The two maps are tools for land and urban planning. The Avezzano area provides a case study of shallow subsurface geology and site effects in a deep continental basin environment, and is of potential interest for similar geologic contexts worldwide. Within the investigated area, almost all the possible earthquake-induced effects can occur, such as (a) stratigraphic amplifications in a wide range of resonance frequencies (from 0.4 to > 10 Hz); (b) liquefaction; (c) coseismic surface faulting; (d) basin-edge effects; and (e) slope instability

Early capture of a central Apennine (Italy) internal basin as a consequence of enhanced regional uplift at the Early-Middle Pleistocene Transition

Extensional tectonics in the inner portion of the central Apennines began during the Late Pliocene-Early Pleistocene. It resulted in the formation of chain-parallel normal fault systems, whose activity through the Quaternary led to the formation of intermontane tectonic basins; these represented traps for continental sedimentary sequences. In particular, during the Early Pleistocene most of the central Apennine depressions hosted lakes, testifying to endorheic hydrographic networks. Afterwards, lacustrine environment was replaced by fluvial regimes, aged at the Middle Pleistocene, as the hydrographic systems of the basins were captured by headward regressive erosion coming from the outermost sectors of the chain. This is testified by a strong erosional phase that cut into the lake sequences, due to deepening of streams and river incisions, and the subsequent deposition of embedded fluvial deposits. This environmental change is commonly attributed to a regional relief enhancement, as a consequence of the increase of regional uplift of the central Apennines (and geologically seen in many parts of the Apennine chain), generically aged between the upper part of the Early Pleistocene and the lower part of the Middle Pleistocene [e.g. D’Agostino et al. 2001]. The Subequana Valley and Middle Aterno Valley are part of a cluster of Quaternary tectonic depressions distributed along the current course of the Aterno River - here termed the Aterno basin system - which also includes the L’Aquila and Paganica-Castelnuovo-San Demetrio basins to the north, and the Sulmona basin to the south. They are located in innermost sector of the central Apennines, in correspondence of the chain divide. These basins are hydrographically connected by the Aterno river, one of the moste important fluvial basins of the “Adriatic domain” which runs south-easterly along the eastern side of the Subequana basin and Middle Aterno Valley, flows to the Sulmona basin through the San Venanzio gorges, where it joins to the Pescara river. The depressions are bounded towards the NE by an active normal fault system that led the formation and the tectonic evolution of the basins [Falcucci et al. 2011]. The analysis of the early Quaternary geological evolution of this depression can represent a significant case study to refine the knowledge of the Early-Middle Pleistocene tectonic/environmental transition, especially in terms of timing, taking into account that uplift rate is defined as having been larger along the chain divide. We integrated geological, geomorphological, paleomagnetic and radiometric dating with the 40Ar/39Ar method to reconstruct the morpho-stratigraphic setting of the Subequana Valley-Middle Aterno river system, defining the paleo-environmental features and chronology of the depositional and erosive events that have characterised the Quaternary geological and structural evolution of these basins. In detail, a synchronous lacustrine depositional phase was recognised in the Subequana basin and the Middle Aterno Valley. Paleomagnetic analysis performed along some sections of these deposits exposed in the Subequana valley attested a reverse magnetisation, reasonably related to the Matuyama Chron. The lacustrine sequence of the Subequana valley passes upwards to sand and gravel, testifying for the infilling of the lake and the onset of a fluvial regime that displays a direction of the drainage towards the north, i.e. opposite to the present Aterno river flow. At the topmost portion of the lake deposits, two subsequent tephra layers were identified and dated by means of 40Ar/39Ar method, at ~890ka, for the lower tephra, and ~805ka for the upper one. It is worth noting that a “short” direct magnetisation event occurred just above the lower tephra, whose significance is still under investigation. This data constraints the infilling of the lake in the Subequana valley very close to the Early-Middle Pleistocene transition. Subsequent to the infilling of the Subequana basin, a fluvial regime, characterised by a northward drainage direction – i.e. opposite to the current one –, was established. Then, after a strong erosional phase, the presence of a new coeval fluvial depositional phase within the Subequana Valley and the Middle Aterno Valley, with flow direction towards the south-east, indicates the formation of a paleo-Aterno. We identified a further fluvial sequence, embedded within the lacustrine sequence through an evident erosional surface. These deposits are found at the northern part of the Subequana valley, where they laterally pass to fluvial deposits that crop out at the southern part of the Middle Aterno river valley; this sequence shows a flow direction consistent with the current direction of the Aterno river. This morpho-stratigraphic setting, schematized in Fig. 1, indicates that after an intense erosional phase, which dissected the lake sequence, the Subequana-Middle Aterno river valley system has been hydrographically connected by the course of a paleo-Aterno river; this river flowed southerly, towards the San Venanzio gorges.Such morpho-stratigraphic interpretation is corroborated by geological observations performed in the Sulmona basin. At the outlet of the Aterno river, we found slope derived breccias, commonly attributed to the Early Pleistocene, that lay over the bedrock Their depositional geometry suggests that the breccias deposited when the Aterno river thalweg was not present yet, that is when the Subequana Valley was hosting a lake and no drainage was hydrographically connecting the valley to the Sulmona basin. Then, an alluvial fan body unconformably overlays the breccias; the fan, suspended over the Aterno river thalweg, was fed by a stream incision coinciding with the paleo-San Venanzio gorges. Lastly, a fluvial deposit is found embedded within the breccias and the alluvial fan, sourcing from the San Venanzio gorges as well. A tephra layer was found interbedded to the sedimentary body. The volcanic deposit was related to the “Pozzolane Rosse” eruption of the Colli Albani district, dated at 456±4 ka BP [Galli et al. 2010]. This fluvial deposit indicates the presence a paleo-Aterno river flowing from the Subequana valley. Therefore, the described morpho-stratigraphic framework, and the obtained chronological elements constrain the capture of the endorheic hydrographic network of the Subequana valley-Middle Aterno Valley during a time span comprised between ~800ka and ~450ka. In this perspective, it is worth noting that endorheic hydrographic networks of other basins (e.g. the Leonessa basins) located along the innermost portion of the central Apennine chain were captured during the same time span by headward erosion of streams and rivers related to the “thyrrenian hydrographic system” [e.g. Fubelli et al 2009]. This provides new elements for unravelling coupling between river incision potential and capability, and the Apennine chain uplift

Surface Faulting Caused by the 2016 Central Italy Seismic Sequence: Field Mapping and LiDAR/UAV Imaging

The three mainshock events (M6.1 24 August, M5.9 26 October, and M6.5 30 October 2016) in the Central Italy earthquake sequence produced surface ruptures on known segments of the Mt. Vettore-Mt. Bove normal fault system. As a result, teams from Italian national research institutions and universities, working collaboratively with the U.S. Geothechnical Extreme Events Reconnaissance Association (GEER), were mobilized to collect perishable data. Our reconnaissance approach included field mapping and advanced imaging technique, both directed towards documenting the location and extent of surface rupture on the main fault exposure and secondary features. Mapping activity occurred after each mainshock (with different levels of detail at different times), which provides data on the progression of locations and amounts of slip between events. Along the full length of the Mt. Vettore-Mt. Bove fault system, vertical offsets ranged from 0-35 cm and 70-200 cm for the 24 August and 30 October events, respectively. Comparisons between observed surface rupture displacements and available empirical models show that the three events fit within expected ranges.Published1585-16104T. Sismicità dell'ItaliaJCR Journa

Evaluation of liquefaction potential in an intermountain Quaternary lacustrine basin (Fucino basin, central Italy)

In this study, we analyse the susceptibility to liquefaction of the Pozzone site, which is located on the northern side of the Fucino lacustrine basin in central Italy. In 1915, this region was struck by a M 7.0 earthquake, which produced widespread coseismic surface effects that were interpreted to be liquefaction-related. However, the interpretation of these phenomena at the Pozzone site is not straightforward. Furthermore, the site is characterized by an abundance of fine-grained sediments, which are not typically found in liquefiable soils. Therefore, in this study, we perform a number of detailed stratigraphic and geotechnical investigations (including continuous-coring borehole, CPTu, SDMT, SPT, and geotechnical laboratory tests) to better interpret these 1915 phenomena and to evaluate the liquefaction potential of a lacustrine environment dominated by fine-grained sedimentation. The upper 18.5 m of the stratigraphic succession comprises fine-grained sediments, including four strata of coarser sediments formed by interbedded layers of sand, silty sand and sandy silt. These strata, which are interpreted to represent the frontal lobes of an alluvial fan system within a lacustrine succession, are highly susceptible to liquefaction. We also find evidence of paleo-liquefaction, dated between 12.1–10.8 and 9.43–9.13 kyrs ago, occurring at depths of 2.1–2.3 m. These data, along with the aforementioned geotechnical analyses, indicate that this site would indeed be liquefiable in a 1915-like earthquake. Although we found a broad agreement among CPTu, DMT and shear wave velocity ‘‘simplified procedures’’ in detecting the liquefaction potential of the Pozzone soil, our results suggest that the use and comparison of different in situ techniques are highly recommended for reliable estimates of the cyclic liquefaction resistance in lacustrine sites characterized by high content of fine-grained soils. In geologic environments similar to the one analysed in this work, where it is difficult to detect liquefiable layers, one can identify sites that are susceptible to liquefaction only by using detailed stratigraphic reconstructions, in situ characterization, and laboratory analyses. This has implications for basic (Level 1) seismic microzonation mapping, which typically relies on the use of empirical evaluations based on geologic maps and pre-existing sub-surface data (i.e., age and type of deposits, prevailing grain size, with particular attention paid to clean sands, and depth of the water table).Published91-1115T. Sismologia, geofisica e geologia per l'ingegneria sismicaJCR Journa

Active and capable fault? The case study of Prata D'Ansidonia (L'Aquila, Central Apennine)

The study deals with the morphogenetic meaning of several linear scarps that carved the paleo-landsurface of Valle Daria, an extended geomorphological feature located between Barisciano (AQ) and Prata D'Ansidonia (AQ). These villages are situated in the southern termination of the L'Aquila intermontane basin (one of the largest basin of the central Apennines), nearby the epicentral area of the 6th April 2009 earthquake (Mw 6.1). These scarps, up to 3 meters high and up to 1.5 km long, define narrow/elongated flat-bottom depressions, filled by colluvial deposits. These depressions are carved into fluvial-deltaical conglomerates, dated back to the lower Pleistocene. Even if different authors have interpreted these shapes as a paleodrainage or secondary faults, a morphometrical study of the Valle Daria paleo-landsurface provided several information which cast doubt on these two interpretations. In order to better understand the nature and the state of activity of these lineaments, geological, geomorphological and geophysical surveys were carried out. A paleoseismological trench pointed out two events of deformation. The curvilinear shape of the shear plane seems to be related to a slow deformation, attributable to collapse-phenomena. Three GPR profiles, two ERT profiles and two microgravimetrical profiles seem to corroborate this interpretation. Therefore, this study permits to attribute the genesis of these scarps to tectono-karstic phenomena, excluding the presence of an active and capable fault.Published346-3494T. Sismologia, geofisica e geologia per l'ingegneria sismicaN/A or not JC

Archaeoseismology: Methodological issues and procedure

Archaeoseismic research contributes important data on past earthquakes. A limitation of the usefulness of archaeoseismology is due to the lack of continuous discussion about the methodology. The methodological issues are particularly important because archaeoseismological investigations of past earthquakes make use of a large variety of methods. Typical in situ investigations include: (1) reconstruction of the local archaeological stratigraphy aimed at defining the correct position and chronology of a destruction layer, presumably related to an earthquake; (2) analysis of the deformations potentially due to seismic shaking or secondary earthquake effects, detectable on walls; (3) analysis of the depositional characteristics of the collapsed material; (4) investigations of the local geology and geomorphology to define possible natural cause(s) of the destruction; (5) investigations of the local factors affecting the ground motion amplifications; and (6) estimation of the dynamic excitation, which affected the site under investigation. Subsequently, a 'territorial' approach testing evidence of synchronous destruction in a certain region may delineate the extent of the area struck by the earthquake. The most reliable results of an archaeoseismological investigation are obtained by application of modern geoarchaeological practice (archaeological stratigraphy plus geological–geomorphological data), with the addition of a geophysical-engineering quantitative approach and (if available) historical information. This gives a basic dataset necessary to perform quantitative analyses which, in turn, corroborate the archaeoseismic hypothesis. Since archaeoseismological investigations can reveal the possible natural causes of destruction at a site, they contribute to the wider field of environmental archaeology, that seeks to define the history of the relationship between humans and the environment. Finally, through the improvement of the knowledge on the past seismicity, these studies can contribute to the regional estimation of seismic hazard