Performance of a First-Level Muon Trigger with High Momentum Resolution Based on the ATLAS MDT Chambers for HL-LHC

Highly selective first-level triggers are essential to exploit the full physics potential of the ATLAS experiment at High-Luminosity LHC (HL-LHC). The concept for a new muon trigger stage using the precision monitored drift tube (MDT) chambers to significantly improve the selectivity of the first-level muon trigger is presented. It is based on fast track reconstruction in all three layers of the existing MDT chambers, made possible by an extension of the first-level trigger latency to six microseconds and a new MDT read-out electronics required for the higher overall trigger rates at the HL-LHC. Data from $pp$-collisions at $\sqrt{s} = 8\,\mathrm{TeV}$ is used to study the minimal muon transverse momentum resolution that can be obtained using the MDT precision chambers, and to estimate the resolution and efficiency of the MDT-based trigger. A resolution of better than $4.1\%$ is found in all sectors under study. With this resolution, a first-level trigger with a threshold of $18\,\mathrm{GeV}$ becomes fully efficient for muons with a transverse momentum above $24\,\mathrm{GeV}$ in the barrel, and above $20\,\mathrm{GeV}$ in the end-cap region.Comment: 6 pages, 11 figures; conference proceedings for IEEE NSS & MIC conference, San Diego, 201

Machinability of ZTA-TiC Ceramics by Electrical Discharge Drilling

AbstractElectric discharge machining of ceramics becomes principally feasible if the ceramic material has a sufficiently high electric conductivity. This can be achieved by adding transition metal carbides, borides or nitrides such as titanium carbide. In case of electric discharge drilling the small electrode dimensions lead to higher current densities compared to die sinking. In order to avoid bursting of the ceramics by thermal shock machining parameters have to be well adjusted and the material should have a high thermal conductivity. A parameter study was carried out to observe the removal behavior depending on machine parameters such as discharge energy, pulse form and flushing conditions

Processing and characterisation of High-Velocity Suspension Flame Sprayed (HVSFS) bioactive glass coatings

The High-Velocity Suspension Flame Spraying (HVSFS) technique was employed in order to deposit bioactive glass coatings onto titanium substrates. Two different glass compositions were examined: the classical 45S5 Bioglass and a newly-developed SiO2–CaO–K2O–P2O5 glass, labelled as “Bio-K”. Suitable raw materials were melted in a furnace and fritted by casting into water. The frit was dry-milled in a porcelain jar and subsequently attrition-milled in isopropanol. The resulting micron- sized powders were dispersed in a water+isopropanol mixture, in order to prepare suitable suspensions for the HVSFS process. The deposition parameters were varied; however, all coatings were obtained by performing three consecutive torch cycles in front of the substrate. The thickness and porosity of the coatings were significantly affected by the chosen set of deposition parameters; however, in all cases, the layer produced during the third torch cycle was thicker and denser than the one produced during the first cycle. As the system temperature increases during the spraying process, the particles sprayed during the last torch cycle remain at T > Tg while they spread, so that interlamellar viscous flow sintering takes place, favouring the formation of such denser microstructure. Both coatings are entirely glassy; however, micro-Raman spectroscopy reveals that, whereas the 45S5 coating is structurally identical to the corresponding bulk glass, the “Bio-K” coating is somewhat different from the bulk one

Effect of the suspension composition on the microstructural properties of high velocity suspension flame sprayed (HVSFS) Al2O3 coatings

Seven different Al2O3-based suspensions were prepared by dispersing two nano-sized Al2O3 powders (having analogous size distribution and chemical composition but different surface chemistry), one micron-sized powder and their mixtures in a water+isopropanol solution. High velocity suspension flame sprayed (HVSFS) coatings were deposited using these suspensions as feedstock and adopting two different sets of spray parameters. The characteristics of the suspension, particularly its agglomeration behaviour, have a significant influence on the coating deposition mechanism and, hence, on its properties (microstructure, hardness, elastic modulus). Dense and very smooth (Ra ~ 1.3 μm) coatings, consisting of well- flattened lamellae having a homogeneous size distribution, are obtained when micron-sized (~1 -2 μm) powders with low tendency to agglomeration are employed. Spray parameters favouring the break-up of the few agglomerates present in the suspension enhance the deposition efficiency (up to >50%), as no particle or agglomerate larger than ~2.5 μm can be fully melted. Nano-sized powders, by contrast, generally form stronger agglomerates, which cannot be significantly disrupted by adjusting the spray parameters. If the chosen nanopowder forms small agglomerates (up to few microns), the deposition efficiency is satisfactory and the coating porosity is limited, although the lamellae generally have a wider size distribution, so that roughness is somewhat higher. If the nanopowder forms large agglomerates (on account of its surfacechemistry), poor deposition efficiencies and porous layers are obtained. Although suspensions containing the pure micron-sized powder produce the densest coatings, the highest deposition efficiency (~70%) is obtained by suitable mixtures of micron-and nano-sized powders, on account of synergistic effect

Modelling Pinus pinea forest management to attain natural regeneration under present and future climatic scenarios

Natural regeneration-based silviculture has been increasingly regarded as a reliable option in sustainable forest management. However, successful natural regeneration is not always easy to achieve. Recently, new concerns have arisen because of changing future climate. To date, regeneration models have proved helpful in decision-making concerning natural regeneration. The implementation of such models into optimization routines is a promising approach in providing forest managers with accurate tools for forest planning. In the present study, we present a stochastic multistage regeneration model for Pinus pinea L. managed woodlands in Central Spain, where regeneration has been historically unsuccessful. The model is able to quantify recruitment under different silviculture alternatives and varying climatic scenarios, with further application to optimize management scheduling. The regeneration process in the species showed high between-year variation, with all subprocesses (seed production, dispersal, germination, predation, and seedling survival) having the potential to become bottlenecks. However, model simulations demonstrate that current intensive management is responsible for regeneration failure in the long term. Specifically, stand densities at rotation age are too low to guarantee adequate dispersal, the optimal density of seed-producing trees being around 150 stems·ha−1. In addition, rotation length needs to be extended up to 120 years to benefit from the higher seed production of older trees. Stochastic optimization confirms these results. Regeneration does not appear to worsen under climate change conditions; the species exhibiting resilience worthy of broader consideration in Mediterranean silviculture

Deposizione di rivestimenti in Al2O3 mediante High Velocity Suspension Flame Spraying (HVSFS): caratteristiche dei riporti ed effetto dei parametri operativi

La tecnica denominata HVSFS (High Velocity Suspension Flame Spraying) è un processo di termospruzzaturainnovativo che, alimentando la torcia con una sospensione di particelle finissime (micro- o nano-metriche)disperse in una fase liquida, permette la deposizione di rivestimenti ceramici ad alta densità e basso spessore(<100 ?m). Per approfondire la relazione fra caratteristiche dei riporti e proprietà della sospensione, varirivestimenti a base di Al2O3 sono stati depositati utilizzando sospensioni di particelle sia micrometriche, siananometriche. Indipendentemente dai parametri di processo selezionati, una sospensione di particellemicrometriche sufficientemente disperse garantisce maggior efficienza di deposizione (>50%) e producerivestimenti costituiti da un’ottima sovrapposizione di lamelle fortemente coese, con maggior durezza(?1200 HV0.05) e minor rugosità (Ra ? 1.3 ?m) rispetto ai rivestimenti ottenibili con sospensioni dinanoparticelle. Sebbene i rivestimenti ottenuti da sospensioni di particelle micrometriche siano anche soggettia tensioni residue trattive più elevate (fra 50 MPa e 100 MPa), la loro eccellente densità e ottima coesione lirendono molto più resistenti all’usura per strisciamento (studiata con test “ball on disk”) rispetto a riporti diAl2O3 prodotti sia con sospensioni di nanoparticelle, sia con tecniche di termospruzzatura convenzionali

Association of candidate gene polymorphisms with clinical subtypes of preterm birth in a Latin American population

Background. Preterm birth (PTB) is the leading cause of neonatal mortality and morbidity. PTB is often classified according to clinical presentation: Idiopathic (PTB-I), preterm premature rupture of membranes (PTB-PPROM), and medically induced (PTBM). The aim of this study was to evaluate the associations between specific candidate genes and clinical subtypes of PTB. Methods. 24 SNPs were genotyped in 18 candidate genes in 709 infant triads. Of them, 243 were PTB-I, 256 PTB-PPROM, and 210 PTB-M. These data were analyzed with a Family-Based Association. Results. PTB was nominally associated with rs2272365 in PON1, rs883319 in KCNN3, rs4458044 in CRHR1, and rs610277 in F3. Regarding clinical subtypes analysis, 3 SNPs were associated with PTB-I (rs2272365 in PON1, rs10178458 in COL4A3, and rs4458044 in CRHR1), rs610277 in F3 was associated with PTBPPROM, and rs883319 in KCNN3 and rs610277 in F3 were associated with PTB-M. Conclusions. Our study identified polymorphisms potentially associated with specific clinical subtypes of PTB in this Latin American population. These results could suggest a specific role of such genes in the mechanisms involved in each clinical subtype. Further studies are required to confirm our results and to determine the role of these genes in the pathophysiology of clinical subtypes

Effects of an open-label pilot study with high-dose EPA/DHA concentrates on plasma phospholipids and behavior in children with attention deficit hyperactivity disorder

<p>Abstract</p> <p>Background</p> <p>Attention deficit hyperactivity disorder (ADHD) is the most common neurological condition in children. This pilot study evaluated the effects of high-dose eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) supplementation on the isolated plasma phospholipids and behavior in children with ADHD (primarily inattentive subtype and combined subtype).</p> <p>Methods</p> <p>Nine children were initially supplemented with 16.2 g EPA/DHA concentrates per day. The dosage was adjusted dependent on the ratio of arachidonic acid (AA) to EPA in the isolated plasma phospholipids at four weeks to reach a level normally found in the Japanese population.</p> <p>Results</p> <p>At the end of the eight-week study, supplementation resulted in significant increases in EPA and DHA, as well as a significant reduction in the AA:EPA ratio (20.78 ± 5.26 to 5.95 ± 7.35, p < 0.01). A psychiatrist (blind to supplement compliance or dosage modifications) reported significant improvements in behavior (inattention, hyperactivity, oppositional/defiant behavior, and conduct disorder). There was also a significant correlation between the reduction in the AA:EPA ratio and global severity of illness scores.</p> <p>Conclusion</p> <p>The findings of this small pilot study suggest supplementation with high-dose EPA/DHA concentrates may improve behavior in children with ADHD.</p