Pb(II) removal using carbon adsorbents prepared by hybrid heating system: Understanding the microwave heating by dielectric characterization and numerical simulation

This work studies the effect of microwaves in the synthesis of carbon adsorbents using pecan nutshell biomass as a precursor in a hybrid multimode microwave cavity avoiding the utilization of chemical activation or susceptors. The dielectric properties were calculated using the cavity perturbation method, and the power distribution of the electromagnetic field inside cavity was obtained by COMSOL Multiphysics. S-350-MW was obtained using at 350 °C and 200 W and it was characterized using elemental analysis, potentiometric titration, FT-IR and nitrogen adsorption isotherms at −196 °C. The adsorption of Pb(II), in single and binary solutions with Cu(II), Cd(II) and Zn(II) in batch systems indicate that the removal of Pb(II) is affected in the presence of Cu(II) due to the competition of these ions as a result of their similarities such as Pauling electronegativity. Finally, the removal of Pb(II) in continuous systems using packed bed columns showed the pH has the most significant effect according to the variance analysis. The finding highlighted the importance of the acidic functional groups in the performance of carbonaceous adsorbents for the removal of Pb(II). Results of this study contribute to the understandings and application of a hybrid heating system and establish the basis of the role of heating processes in the preparation of carbonaceous adsorbents using microwaves. The Pb(II) removal efficiency achieved in this study is significantly higher than the values reported for carbons prepared by using microwave heating which employs susceptors and/or chemical agents reported in literature, demonstrating that it is possible to obtain effective carbon absorbents for the removal of Pb(II) without the use of any additional susceptors or chemical activation

Fast regeneration of activated carbons saturated with textile dyes: Textural, thermal and dielectric characterization

This study presents an investigation for comparing the regeneration process of two activated carbons saturated with Basic Blue 9 (BB9) and Acid Blue 93 (AB93) using conventional (250–500 °C) and microwave heating (100–300 W). The effect of the textile dye used on the regeneration performance was analyzed by determining their dielectric properties using the perturbation cavity method from 20 to 600 °C and by TG/DTG analysis. The efficacy of the regenerated carbons was investigated by their physical properties characterized by pore structural analysis using N2 adsorption isotherms. Results showed only 3 min are required by microwaves to achieve similar textural parameters obtained by conventional heating at 190 min. The results indicate that the adsorbate plays a determining role on the regeneration efficiency as results of their interaction with the adsorbent, being easily regenerated when AB93 is the adsorbate. The adsorption capacity of microwave regenerated samples for AB93 and BB9 was 192–240 and 154–175 mg/g, respectively. Additionally, the equilibrium isotherms were simulated using the Langmuir and Freundlich isotherms models and the results suggest the textile dye removal is achieved on multilayer adsorption

Fast pyrolysis of agricultural residues: Reaction mechanisms and effects of feedstock properties and Microwave operating conditions on the yield and product composition

Fundamental understanding of the pyrolysis process plays an indispensable role in valorization of wastes and the development of novel sustainable technologies. This study introduces a novel approach by investigating the reaction mechanisms involve in Microwave-Assisted Fast Pyrolysis (MAFP) to unveil the thermal decomposition of agricultural residues: pecan nutshell (NS), sugarcane bagasse (SB), and orange seed (OS) biomasses. The holistic understanding of the pyrolysis process for these biomasses was analyzed based on the final chemical compositions and yields of bio-oil, biochar and biogas and correlated to the microwave processing conditions and feedstock’s chemical composition. The findings revealed that the bio-oil is enhanced at moderated microwave energy (<5 GJ/t) as result of endothermic reactions such as heterolytic fragmentation, Maccoll elimination, Friedel-Craft acylation, Piancatelli rearrangement and methoxylation. The maximum yield of bio-oil for protein-rich biomass was due to selective heating (Paal-Knorr pyrrole synthesis, Baeyer-Villiger oxidation, Maillard reaction, and ring conversion of γ-butyrolactone). The formation of biochar and biogas is attributed to the repolymerization of aromatic aldehydes, hydrocarbons, amines, and ethers, as well as dehydroxymethylation and dealkylation processes. This study provides a comprehensive understanding of the reaction mechanisms for several wastes using microwave pyrolysis, to establish the bases for effective valorization and agricultural waste management

Macroalgal biorefinery concepts for the circular bioeconomy: A review on biotechnological developments and future perspectives

The imminent need for transition to a circular bioeconomy, based on the valorisation of renewable biomass feedstocks, will ameliorate global challenges induced by climate change, environmental pollution and population growth. A reduced reliance on depleting fossil fuel resources and ensured production of eco-friendly and cost-effective bioproducts and biofuels, requires the development of sustainable biorefinery processes, with many utilising macroalgae as feedstock, showing promising and viable prospects. Nonetheless, macroalgal biorefinery research is still in its infancy compared to lignocellulosic biorefineries that utilise terrestrial plants. This article presents a review on the latest scientific literature associated with the development and status of macroalgal biorefineries, and how bioproducts generated from these bioprocesses have contributed towards the bioeconomy. The fundamental need to understand how the unique biochemical composition of macroalgae fit within a biorefinery concept are explained, alongside discussion of the novel biotechnologies that have been applied. In order to comprehend the increasing significance of this exciting field, the review will also provide insight, for the first time, on the current global funding and intellectual property landscape related to macroalgae and their implementation across the entire biorefinery concept. Imperative areas for further research and development, to bridge the gap between fundamental bioscience in the laboratory and the successful application of compatible biotechnologies at a commercial scale, to boost the macroalgae industry are also covered

Solid-State Culture for Lignocellulases Production

Aspergillus sp. and Trametes versicolor solid-state monocultures produced high titers of xylanases and laccases activities (4617 ± 38 and 2759 ± 30 U/gsubstrate, respectively). Fungal biomass was quantified by estimating the ergosterol content of the mycelium, and by a simple material balance the corresponding residual substrate was obtained. Fungal growth and substrate consumption rates showed different behavior for these monocultures (μ = 0.03 and 0.11 h−1; rs = − 0.04 and − 0.0006 gsubstrate/h, respectively). In this case, xylanases production was directly linked to the growth, while laccases were produced during both growth and maintenance phases. Besides xylanases (42% of total Aspergillus enzyme), high titers of cellulases (15%), amylases (34%), and invertases (9%), as well as lignin and manganese peroxidases (10 and 24% of the total Trametes enzyme), were produced on the corresponding monocultures. When both fungi were used in a coculture mode, xylanases and laccases production decreased (around 85 and 70%), and the proportion of the hydrolases and oxidases changed. This suggested the need for most careful coculture design, in order to produce both enzymatic activities simultaneously even though the enzymatic extracts obtained by mono- or cocultures can be applied in several bioprocesses

Rapid, simple and sustainable synthesis of ultra-microporous carbons with high performance for CO2 uptake, via microwave heating

A one step microwave pyrolysis-activation method has been developed for the preparation of activated carbons from biomass with high CO2 capture efficiency (5.3 mmol g−1) by employing a low impregnation ratio (1) of KOH and K2CO3. The high microwave susceptibility identified by the dielectric properties enabled the preparation of a series of activated carbons in short processing times (<6 min), and the pyrolysis-activation simultaneously enhanced the formation of ultra-micropores leading to high CO2 uptake at 15 and 100% CO2 in the temperature range of 0–100 °C. The high CO2/N2 selectivity of up to 36 the adsorptive capacities were directly correlated to a pore size of ~0.7 nm, which favoured CO2 uptake up to 5.3 and 4.5 mmol g−1 at 1.1 bar and 0 °C and an uptake of 3.7 and 3.3 at 25 °C for activated samples with KOH and K2CO3, respectively. The activated carbons presented in this study are the first examples of samples that have been prepared by this simple and rapid method, which represents a 96.66% reduction in the processing times in comparison to conventional heating routes, and the CO2 uptake is comparable to the largest reported in literature for activated carbons. The outstanding uptake and selectivity, the simple synthesis using microwave technology in addition to the utilisation of a waste biomass as a carbon precursor, satisfy the requirements for the development of new and more sustainable energy environmental processes

Microwave pyrolysis of olive pomace for bio-oil and bio-char production

Olive pomace is a widely available agro-industrial waste residue in Europe that has the potential to contribute towards a circular, low carbon bio-economy. This study demonstrated, for the first time, the ability to successfully pyrolyse olive pomace with microwaves for the production of bio-char and bio-oil. It was found that the energy requirement needed to pyrolyse up to 80% of the olive pomace was as low as 3.6 kJ/g and bio-oil yields up to 30% were produced. Microwave power did not influence the overall yields or the chemical composition of the obtained bio-oils, but did alter the textural properties of the generated bio-chars and their ability to remove methylene blue dye. Optimum processing conditions were found to be within the 3.6 kJ/g energy requirement with a microwave power of 200 W and processing time of 180 sec. These conditions produced a bio-oil fraction containing mainly acetic acid (71.9%) and a bio-char with a surface area of 392.3 m2/g, micropore volume of 0.15 cm3/g and a methylene blue removal efficiency of 40 qMB mg/g. The results acquired from this study reveal the superiority of microwave heating in a pyrolysis system and highlight a novel and prospective route for added value recovery from natural waste resources like olive pomace

In vitro Characterization of Anti-SARS-CoV-2 Intravenous Immunoglobulins (IVIg) Produced From Plasma of Donors Immunized With the BNT162b2 Vaccine and Its Comparison With a Similar Formulation Produced From Plasma of COVID-19 Convalescent Donors

Despite vaccines are the main strategy to control the ongoing global COVID-19 pandemic, their effectiveness could not be enough for individuals with immunosuppression. In these cases, as well as in patients with moderate/severe COVID-19, passive immunization with anti-SARS-CoV-2 immunoglobulins could be a therapeutic alternative. We used caprylic acid precipitation to prepare a pilot-scale batch of anti-SARS-CoV-2 intravenous immunoglobulins (IVIg) from plasma of donors immunized with the BNT162b2 (Pfizer-BioNTech) anti-COVID-19 vaccine (VP-IVIg) and compared their in vitro efficacy and safety with those of a similar formulation produced from plasma of COVID-19 convalescent donors (CP-IVIg). Both formulations showed immunological, physicochemical, biochemical, and microbiological characteristics that meet the specifications of IVIg formulations. Moreover, the concentration of anti-RBD and ACE2-RBD neutralizing antibodies was higher in VP-IVIg than in CP-IVIg. In concordance, plaque reduction neutralization tests showed inhibitory concentrations of 0.03–0.09 g/L in VP-IVIg and of 0.06–0.13 in CP-IVIg. Thus, VP-IVIg has in vitro efficacy and safety profiles that justify their evaluation as therapeutic alternative for Rojas-Jiménez et al. Anti-SARS-CoV-2 IVIg clinical cases of COVID-19. Precipitation with caprylic acid could be a simple, feasible, and affordable alternative to produce formulations of anti-SARS-CoV-2 IVIg to be used therapeutically or prophylactically to confront the COVID-19 pandemic in middle and low-income countries.Universidad de Costa Rica/[741-C0-198]/UCR/Costa RicaBanco Centroamericano de Integración Económica/[DI- 87/2020]/BCIE/Costa RicaMinisterio de Ciencia, Innovación, Tecnología y Telecomunicaciones de Costa Rica/[FV-0001- 20]/MICITT/Costa RicaGerman academic exchange services/[57592642]/DAAD/AlemaniaUCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias de la Salud::Instituto Clodomiro Picado (ICP)UCR::Vicerrectoría de Docencia::Salud::Facultad de MicrobiologíaUCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias de la Salud::Centro de Investigación en Enfermedades Tropicales (CIET

EDUCACIÓN AMBIENTAL Y SOCIEDAD. SABERES LOCALES PARA EL DESARROLLO Y LA SUSTENTABILIDAD

Este texto contribuye al análisis científico de varias áreas del conocimiento como la filosofía social, la patología, la educación para el cuidado del medio ambiente y la sustentabilidad que inciden en diversas unidades de aprendizaje de la Licenciatura en Educación para la Salud y de la Maestría en Sociología de la SaludLas comunidades indígenas de la sierra norte de Oaxaca México, habitan un territorio extenso de biodiversidad. Sin que sea una área protegida y sustentable, la propia naturaleza de la región ofrece a sus visitantes la riqueza de la vegetación caracterizada por sus especies endémicas que componen un paisaje de suma belleza

Evaluation of factors leading to poor outcomes for pediatric acute lymphoblastic leukemia in Mexico: a multi-institutional report of 2,116 patients

Background and aimsPediatric acute lymphoblastic leukemia (ALL) survival rates in low- and middle-income countries are lower due to deficiencies in multilevel factors, including access to timely diagnosis, risk-stratified therapy, and comprehensive supportive care. This retrospective study aimed to analyze outcomes for pediatric ALL at 16 centers in Mexico.MethodsPatients &lt;18 years of age with newly diagnosed B- and T-cell ALL treated between January 2011 and December 2019 were included. Clinical and biological characteristics and their association with outcomes were examined.ResultsOverall, 2,116 patients with a median age of 6.3 years were included. B-cell immunophenotype was identified in 1,889 (89.3%) patients. The median white blood cells at diagnosis were 11.2.5 × 103/mm3. CNS-1 status was reported in 1,810 (85.5%), CNS-2 in 67 (3.2%), and CNS-3 in 61 (2.9%). A total of 1,488 patients (70.4%) were classified as high-risk at diagnosis. However, in 52.5% (991/1,889) of patients with B-cell ALL, the reported risk group did not match the calculated risk group allocation based on National Cancer Institute (NCI) criteria. Fluorescence in situ hybridization (FISH) and PCR tests were performed for 407 (19.2%) and 736 (34.8%) patients, respectively. Minimal residual disease (MRD) during induction was performed in 1,158 patients (54.7%). The median follow-up was 3.7 years. During induction, 191 patients died (9.1%), and 45 patients (2.1%) experienced induction failure. A total of 365 deaths (17.3%) occurred, including 174 deaths after remission. Six percent (176) of patients abandoned treatment. The 5-year event-free survival (EFS) was 58.9% ± 1.7% for B-cell ALL and 47.4% ± 5.9% for T-cell ALL, while the 5-year overall survival (OS) was 67.5% ± 1.6% for B-cell ALL and 54.3% ± 0.6% for T-cell ALL. The 5-year cumulative incidence of central nervous system (CNS) relapse was 5.5% ± 0.6%. For the whole cohort, significantly higher outcomes were seen for patients aged 1–10 years, with DNA index &gt;0.9, with hyperdiploid ALL, and without substantial treatment modifications. In multivariable analyses, age and Day 15 MRD continued to have a significant effect on EFS.ConclusionOutcomes in this multi-institutional cohort describe poor outcomes, influenced by incomplete and inconsistent risk stratification, early toxic death, high on-treatment mortality, and high CNS relapse rate. Adopting comprehensive risk-stratification strategies, evidence-informed de-intensification for favorable-risk patients and optimized supportive care could improve outcomes