Gluelump Spectrum in the Bag Model

We explore the ordering of the lowest levels in a simple bag model of the ``gluelump'' of Michael and also discuss, again within the context of the bag model, the related problem of hybrid potentials in the limit of very small spacing between quark and anti-quark sources.Comment: 10 page

Detecting colorectal cancer using electrical impedance spectroscopy: an ex vivo feasibility study

Objective: Colorectal cancer is the fourth most common cancer worldwide, with a lifetime risk of around 20%. Current solutions do not allow clinicians to objectively assess tissue abnormality during endoscopy and perioperatively. A solution capable of objectively assessing samples in real time could greatly improve the treatment process. A solution that can be integrated in minimally invasive diagnostics and management strategies to provide real-time point-of-care information would be greatly transformative. Electrical impedance spectroscopy (EIS) may provide such a solution. In this paper, we present a feasibility study on using EIS in assessing colorectal tissue. Approach: We performed tetrapolar EIS using ZedScan on excised human colorectal tumour tissue and the matched normal colonic mucosa in 22 freshly resected specimens following elective surgery for colorectal cancer. Histopathological examination was used to confirm the final diagnosis. Statistical significance was assessed with Wilcoxon signed rank test. Main results: Tetrapolar EIS could discriminate cancer with statistically significant results when applying frequencies between 305 Hz – 625 kHz (p < 0.05). 300 Ω was set as the transfer impedance threshold to detect cancer. Thus, the area under the corresponding receiver operating characteristic curve for this threshold was 0.7105. Significance: This feasibility study demonstrates that impedance spectra changes in colorectal cancer tissue are detectable and may be statistically significant, suggesting that EIS has the potential to be the core technology in a novel non-invasive point of care test for detecting colorectal cancer. These results warrant further development and increasing the size of the study with a device specificity designed for colorectal cancer

Quantum Holographic Encoding in a Two-dimensional Electron Gas

The advent of bottom-up atomic manipulation heralded a new horizon for attainable information density, as it allowed a bit of information to be represented by a single atom. The discrete spacing between atoms in condensed matter has thus set a rigid limit on the maximum possible information density. While modern technologies are still far from this scale, all theoretical downscaling of devices terminates at this spatial limit. Here, however, we break this barrier with electronic quantum encoding scaled to subatomic densities. We use atomic manipulation to first construct open nanostructures--"molecular holograms"--which in turn concentrate information into a medium free of lattice constraints: the quantum states of a two-dimensional degenerate Fermi gas of electrons. The information embedded in the holograms is transcoded at even smaller length scales into an atomically uniform area of a copper surface, where it is densely projected into both two spatial degrees of freedom and a third holographic dimension mapped to energy. In analogy to optical volume holography, this requires precise amplitude and phase engineering of electron wavefunctions to assemble pages of information volumetrically. This data is read out by mapping the energy-resolved electron density of states with a scanning tunnelling microscope. As the projection and readout are both extremely near-field, and because we use native quantum states rather than an external beam, we are not limited by lensing or collimation and can create electronically projected objects with features as small as ~0.3 nm. These techniques reach unprecedented densities exceeding 20 bits/nm2 and place tens of bits into a single fermionic state.Comment: Published online 25 January 2009 in Nature Nanotechnology; 12 page manuscript (including 4 figures) + 2 page supplement (including 1 figure); supplementary movie available at http://mota.stanford.ed

Nod1 acts as an intracellular receptor to stimulate chemokine production and neutrophil recruitment in vivo

Nod1 is a member of family of intracellular proteins that mediate host recognition of bacterial peptidoglycan. To characterize immune responses mediated by Nod1, synthetic ligand compounds possessing enhanced ability to stimulate Nod1 were developed to study the function of Nod1. Stimulation of epithelial cells with Nod1 stimulatory molecules induced chemokines and other proinflammatory molecules that are important for innate immune responses and recruitment of acute inflammatory cells. Administration of Nod1 ligands into mice induced chemokines and recruitment of acute inflammatory cells, an activity that was abolished in Nod1-null mice. Microarray analysis revealed that Nod1 stimulation induces a restricted number of genes in intestinal epithelial cells compared with that induced by tumor necrosis factor (TNF) α. Nod1 stimulation did not induce TNFα, interleukin 12, and interferon γ, suggesting that the primary role of Nod1 is to induce the recruitment of immune cells. These results indicate that Nod1 functions as a pathogen recognition molecule to induce expression of molecules involved in the early stages of the innate immune response

An ELISA-based high throughput protein truncation test for inherited breast cancer

Abstract Introduction Breast cancer is the most diagnosed and second leading cause of cancer deaths in the U.S. female population. An estimated 5 to 10 percent of all breast cancers are inherited, caused by mutations in the breast cancer susceptibility genes (BRCA1/2). As many as 90% of all mutations are nonsense mutations, causing a truncated polypeptide product. A popular and low cost method of mutation detection has been the protein truncation test (PTT), where target regions of BRCA1/2 are PCR amplified, transcribed/translated in a cell-free protein synthesis system and analyzed for truncated polypeptides by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and autoradiography. We previously reported a novel High Throughput Solid-Phase PTT (HTS-PTT) based on an enzyme-linked immunosorbent assay (ELISA) format that eliminates the need for radioactivity, SDS-PAGE and subjective interpretation of the results. Here, we report the next generation HTS-PTT using triple-epitope-tagged proteins and demonstrate, for the first time, its efficacy on clinical genomic DNA samples for BRCA1/2 analysis. Methods Segments of exons 11 of BRCA1/2 open reading frames were PCR amplified from either blood derived genomic DNA or cell line mRNA. PCR primers incorporate elements for cell-free transcription/translation and epitope tagging. Cell-free expressed nascent proteins are then antibody-captured onto the wells of a microtiter plate and the relative amount of truncated polypeptide measured using antibodies against the N- and C-terminal epitope tags in an ELISA format. Results 100% diagnostic sensitivity and 96% specificity for truncating mutations in exons 11 of BRCA1/2 were achieved on one hundred blood-derived clinical genomic DNA samples which were previously assayed using the conventional gel based PTT. Feasibility of full gene coverage for BRCA1/2 using mRNA source material is also demonstrated. Conclusions Overall, the HTS-PTT provides a simple, quantitative, objective, low cost and high throughput method for analysis of truncating mutations as an alternative to gel based PTT for BRCA analysis. The technology is readily accessible to virtually any laboratory, with the only major instrumentation required being a PCR thermocycler and a basic micro-well plate reader. When compared to conventional gel based PTT, the HTS-PTT provides excellent concordance

Holocene deglaciation and glacier readvances on the Fildes Peninsula and King George Island (Isla 25 de Mayo), South Shetland Islands, NW Antarctic Peninsula

To provide insights into glacier-climate dynamics of the South Shetland Islands (SSI), NW Antarctic Peninsula, we present a new deglaciation and readvance model for the Bellingshausen Ice Cap (BIC) on Fildes Peninsula and for King George Island/Isla 25 de Mayo (KGI) ~62°S. Deglaciation on KGI began after c. 15 ka cal BP and had progressed to within present-day limits on the Fildes Peninsula, its largest ice-free peninsula, by c. 6.6–5.3 ka cal BP. Probability density phase analysis of chronological data constraining Holocene glacier advances on KGI revealed up to eight 95% probability ‘gaps’ during which readvances could have occurred. These are grouped into four stages – Stage 1: a readvance and marine transgression, well-constrained by field data, between c. 7.4–6.6 ka cal BP; Stage 2: four probability ‘gaps’, less well-constrained by field data, between c. 5.3–2.2 ka cal BP; Stage 3: a well-constrained but restricted ‘readvance’ between c. 1.7–1.5 ka; Stage 4: two further minor ‘readvances’, one less well-constrained by field data between c. 1.3–0.7 ka cal BP (68% probability), and a ‘final’ well-constrained ‘readvance’ after 1950 CE) is associated with recent warming/more positive SAM-like conditions

VCU Jazz Orchestra I

First half of performanc

Influence of head models on neuromagnetic fields and inverse source localizations

BACKGROUND: The magnetoencephalograms (MEGs) are mainly due to the source currents. However, there is a significant contribution to MEGs from the volume currents. The structure of the anatomical surfaces, e.g., gray and white matter, could severely influence the flow of volume currents in a head model. This, in turn, will also influence the MEGs and the inverse source localizations. This was examined in detail with three different human head models. METHODS: Three finite element head models constructed from segmented MR images of an adult male subject were used for this study. These models were: (1) Model 1: full model with eleven tissues that included detailed structure of the scalp, hard and soft skull bone, CSF, gray and white matter and other prominent tissues, (2) the Model 2 was derived from the Model 1 in which the conductivity of gray matter was set equal to the white matter, i.e., a ten tissuetype model, (3) the Model 3 consisted of scalp, hard skull bone, CSF, gray and white matter, i.e., a five tissue-type model. The lead fields and MEGs due to dipolar sources in the motor cortex were computed for all three models. The dipolar sources were oriented normal to the cortical surface and had a dipole moment of 100 μA meter. The inverse source localizations were performed with an exhaustive search pattern in the motor cortex area. A set of 100 trial inverse runs was made covering the 3 cm cube motor cortex area in a random fashion. The Model 1 was used as a reference model. RESULTS: The reference model (Model 1), as expected, performed best in localizing the sources in the motor cortex area. The Model 3 performed the worst. The mean source localization errors (MLEs) of the Model 3 were larger than the Model 1 or 2. The contour plots of the magnetic fields on top of the head were also different for all three models. The magnetic fields due to source currents were larger in magnitude as compared to the magnetic fields of volume currents. DISCUSSION: These results indicate that the complexity of head models strongly influences the MEGs and the inverse source localizations. A more complex head model performs better in inverse source localizations as compared to a model with lesser tissue surfaces

Author Correction: Cross-ancestry genome-wide association analysis of corneal thickness strengthens link between complex and Mendelian eye diseases.

Emmanuelle Souzeau, who contributed to analysis of data, was inadvertently omitted from the author list in the originally published version of this Article. This has now been corrected in both the PDF and HTML versions of the Article

Status of Muon Collider Research and Development and Future Plans

The status of the research on muon colliders is discussed and plans are outlined for future theoretical and experimental studies. Besides continued work on the parameters of a 3-4 and 0.5 TeV center-of-mass (CoM) energy collider, many studies are now concentrating on a machine near 0.1 TeV (CoM) that could be a factory for the s-channel production of Higgs particles. We discuss the research on the various components in such muon colliders, starting from the proton accelerator needed to generate pions from a heavy-Z target and proceeding through the phase rotation and decay ($\pi \to \mu \nu_{\mu}$) channel, muon cooling, acceleration, storage in a collider ring and the collider detector. We also present theoretical and experimental R & D plans for the next several years that should lead to a better understanding of the design and feasibility issues for all of the components. This report is an update of the progress on the R & D since the Feasibility Study of Muon Colliders presented at the Snowmass'96 Workshop [R. B. Palmer, A. Sessler and A. Tollestrup, Proceedings of the 1996 DPF/DPB Summer Study on High-Energy Physics (Stanford Linear Accelerator Center, Menlo Park, CA, 1997)].Comment: 95 pages, 75 figures. Submitted to Physical Review Special Topics, Accelerators and Beam