Plankton Algae of the Upper Des Moines River, Iowa

Sedgewick-Rafter quantitative strip counts and proportional counts of Hyrax-mounted diatom slides were made on weekly grab samples taken at one station near Boone, and every other week at four other downstream stations during 1968 and January 1969. Eleven cyanophycean taxa, six green flagellate taxa, three taxa of other pigmented flagellates, and 42 taxa of other green algae were encountered. A total of 185 diatom taxa in 33 genera were identified, 75 of which are new to Des Moines River records. Biddulphia and Thalassiosira are diatom genera new to published records in Iowa

Sizes of walleye pollock (Theragra chalcogramma) and Atka mackerel (Pleurogrammus monopterygius) consumed by the western stock of Steller sea lions (Eumetopias jubatus) in Alaska from 1999 to 2000

Prey-size selectivity by Steller sea lions (Eumetopias jubatus) is relevant for understanding the foraging behavior of this declining predator, but studies have been problematic because of the absence and erosion of otoliths usually used to estimate fish length. Therefore, we developed regression formulae to estimate fish length from seven diagnostic cranial structures of walleye pollock (Theragra chalcogramma) and Atka mackerel (Pleurogrammus monopterygius). For both species, all structure measurements were related with fork length of prey (r2 range: 0.78−0.99). Fork length (FL) of walleye pollock and Atka mackerel consumed by Steller sea lions was estimated by applying these regression models to cranial structures recovered from scats (feces) collected between 1998 and 2000 across the range of the Alaskan western stock of Steller sea lions. Experimentally derived digestion correction factors were applied to take into account loss of size due to digestion. Fork lengths of walleye pollock consumed by Steller sea lions ranged from 3.7 to 70.8 cm (mean=39.3 cm, SD=14.3 cm, n=666) and Atka mackerel ranged from 15.3 to 49.6 cm (mean=32.3 cm, SD=5.9 cm, n=1685). Although sample sizes were limited, a greater proportion of juvenile (≤20 cm) walleye pollock were found in samples collected during the summer (June−September) on haul-out sites (64% juveniles, n=11 scats) than on summer rookeries (9% juveniles, n=132 scats) or winter (February−March) haul-out sites (3% juveniles, n=69 scats). Annual changes in the size of Atka mackerel consumed by Steller sea lions corresponded to changes in the length distribution of Atka mackerel resulting from exceptionally strong year classes. Considerable overlap (>51%) in the size of walleye pollock and Atka mackerel taken by Steller sea lions and the sizes of these species caught by the commercial trawl fishery were demonstrated

Family Involvement in Management and Product Innovation: The Mediating Role of R&D Strategies

Following calls to capture family firms’ innovative behavior and to specifically clarify how family firms manage product innovations to achieve sustainable economic development, this study empirically investigates the mediating role of Research & Development (R&D) strategies (i.e., intramural R&D investments, extramural R&D investments, and the combination of both intramural and extramural R&D investments) in the relationship between family involvement in the management and likelihood of obtaining product innovations. Carrying out a panel data analysis that is based on 7264 observations of Spanish manufacturing firms throughout the 2000–2015 period, our results suggest a negative effect of the level of family management on the likelihood of introducing product innovations. Moreover, we found that intramural R&D investments and the investment strategy consisting of both intramural and extramural R&D mediated the family involvement in management-likelihood of obtaining product innovations relationship. Our findings contribute important insights to the comprehension of which determinants instigate product innovation in family managed firms

Random-phase Approximation Treatment Of Edge Magnetoplasmons: Edge-state Screening And Nonlocality

A random-phase approximation (RPA) treatment of edge magnetoplasmons (EMP) is presented for strong magnetic fields, low temperatures, and integer filling factors \nu. It is valid for negligible dissipation and lateral confining potentials smooth on the scale of the magnetic length \ell_{0} but sufficiently steep that the Landau-level (LL) flattening can be neglected. LL coupling, screening by edge states, and nonlocal contributions to the current density are taken into account. In addition to the fundamental mode with typical dispersion relation \omega\sim q_x \ln(q_{x}), fundamental modes with {\it acoustic} dispersion relation \omega\sim q_x are obtained for \nu>2. For \nu=1,2 a {\bf dipole} mode exists, with dispersion relation \omega\sim q_x^3, that is directly related to nonlocal responses.Comment: Text 12 pages in Latex/Revtex format, 4 Postscript figure

A Thermodynamically-Based Mesh Objective Work Potential Theory for Predicting Intralaminar Progressive Damage and Failure in Fiber-Reinforced Laminates

A thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates is presented. The current, multiple-internal state variable (ISV) formulation, enhanced Schapery theory (EST), utilizes separate ISVs for modeling the effects of damage and failure. Damage is considered to be the effect of any structural changes in a material that manifest as pre-peak non-linearity in the stress versus strain response. Conversely, failure is taken to be the effect of the evolution of any mechanisms that results in post-peak strain softening. It is assumed that matrix microdamage is the dominant damage mechanism in continuous fiber-reinforced polymer matrix laminates, and its evolution is controlled with a single ISV. Three additional ISVs are introduced to account for failure due to mode I transverse cracking, mode II transverse cracking, and mode I axial failure. Typically, failure evolution (i.e., post-peak strain softening) results in pathologically mesh dependent solutions within a finite element method (FEM) setting. Therefore, consistent character element lengths are introduced into the formulation of the evolution of the three failure ISVs. Using the stationarity of the total work potential with respect to each ISV, a set of thermodynamically consistent evolution equations for the ISVs is derived. The theory is implemented into commercial FEM software. Objectivity of total energy dissipated during the failure process, with regards to refinements in the FEM mesh, is demonstrated. The model is also verified against experimental results from two laminated, T800/3900-2 panels containing a central notch and different fiber-orientation stacking sequences. Global load versus displacement, global load versus local strain gage data, and macroscopic failure paths obtained from the models are compared to the experiments

Computational Implementation of a Thermodynamically Based Work Potential Model For Progressive Microdamage and Transverse Cracking in Fiber-Reinforced Laminates

A continuum-level, dual internal state variable, thermodynamically based, work potential model, Schapery Theory, is used capture the effects of two matrix damage mechanisms in a fiber-reinforced laminated composite: microdamage and transverse cracking. Matrix microdamage accrues primarily in the form of shear microcracks between the fibers of the composite. Whereas, larger transverse matrix cracks typically span the thickness of a lamina and run parallel to the fibers. Schapery Theory uses the energy potential required to advance structural changes, associated with the damage mechanisms, to govern damage growth through a set of internal state variables. These state variables are used to quantify the stiffness degradation resulting from damage growth. The transverse and shear stiffness of the lamina are related to the internal state variables through a set of measurable damage functions. Additionally, the damage variables for a given strain state can be calculated from a set of evolution equations. These evolution equations and damage functions are implemented into the finite element method and used to govern the constitutive response of the material points in the model. Additionally, an axial failure criterion is included in the model. The response of a center-notched, buffer strip-stiffened panel subjected to uniaxial tension is investigated and results are compared to experiment

Short term non-invasive ventilation post-surgery improves arterial blood-gases in obese subjects compared to supplemental oxygen delivery - a randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>In the immediate postoperative period, obese patients are more likely to exhibit hypoxaemia due to atelectasis and impaired respiratory mechanics, changes which can be attenuated by non-invasive ventilation (NIV). The aim of the study was to evaluate the duration of any effects of early initiation of short term pressure support NIV vs. traditional oxygen delivery via venturi mask in obese patients during their stay in the PACU.</p> <p>Methods</p> <p>After ethics committee approval and informed consent, we prospectively studied 60 obese patients (BMI 30-45) undergoing minor peripheral surgery. Half were randomly assigned to receive short term NIV during their PACU stay, while the others received routine treatment (supplemental oxygen via venturi mask). Premedication, general anaesthesia and respiratory settings were standardized. We measured arterial oxygen saturation by pulse oximetry and blood gas analysis on air breathing. Inspiratory and expiratory lung function was measured preoperatively (baseline) and at 10 min, 1 h, 2 h, 6 h and 24 h after extubation, with the patient supine, in a 30 degrees head-up position. The two groups were compared using repeated-measure analysis of variance (ANOVA) and t-test analysis. Statistical significance was considered to be P < 0.05.</p> <p>Results</p> <p>There were no differences at the first assessment. During the PACU stay, pulmonary function in the NIV group was significantly better than in the controls (p < 0.0001). Blood gases and the alveolar to arterial oxygen partial pressure difference were also better (p < 0.03), but with the addition that overall improvements are of questionable clinical relevance. These effects persisted for at least 24 hours after surgery (p < 0.05).</p> <p>Conclusion</p> <p>Early initiation of short term NIV during in the PACU promotes more rapid recovery of postoperative lung function and oxygenation in the obese. The effect lasted 24 hours after discontinuation of NIV. Patient selection is necessary in order to establish clinically relevant improvements.</p> <p>Trial Registration#</p> <p>DRKS00000751; <url>http://www.germanctr.de</url></p