Aquilegia, Vol. 26 No. 5, September-October 2002: Newsletter of the Colorado Native Plant Society

https://epublications.regis.edu/aquilegia/1095/thumbnail.jp

NOMAD spectrometer on the ExoMars trace gas orbiter mission: part 2—design, manufacturing, and testing of the ultraviolet and visible channel

NOMAD is a spectrometer suite on board the ESA/Roscosmos ExoMars Trace Gas Orbiter, which launched in March 2016. NOMAD consists of two infrared channels and one ultraviolet and visible channel, allowing the instrument to perform observations quasi-constantly, by taking nadir measurements at the day- and night-side, and during solar occultations. Here, in part 2 of a linked study, we describe the design, manufacturing, and testing of the ultraviolet and visible spectrometer channel called UVIS. We focus upon the optical design and working principle where two telescopes are coupled to a single grating spectrometer using a selector mechanism

Expected Performances of the NOMAD/ExoMars instrument

NOMAD (Nadir and Occultation for MArs Discovery) is one of the four instruments on board the ExoMars Trace Gas Orbiter, scheduled for launch in March 2016. It consists of a suite of three high-resolution spectrometers – SO (Solar Occultation), LNO (Limb, Nadir and Occultation) and UVIS (Ultraviolet and Visible Spectrometer). Based upon the characteristics of the channels and the values of Signal-to-Noise Ratio obtained from radiometric models discussed in [Vandaele et al., Optics Express, 2015] and [Thomas et al., Optics Express, 2015], the expected performances of the instrument in terms of sensitivity to detection have been investigated. The analysis led to the determination of detection limits for 18 molecules, namely CO, H2O, HDO, C2H2, C2H4, C2H6, H2CO, CH4, SO2, H2S, HCl, HCN, HO2, NH3, N2O, NO2, OCS, O3. NOMAD should have the ability to measure methane concentrations <25 parts per trillion (ppt) in solar occultation mode, and 11 parts per billion in nadir mode. Occultation detections as low as 10 ppt could be made if spectra are averaged [Drummond et al., Planetary Space and Science, 2011]. Results have been obtained for all three channels in nadir and in solar occultation

NALP3 inflammasome upregulation and CASP1 cleavage of the glucocorticoid receptor cause glucocorticoid resistance in leukemia cells

Glucocorticoids are universally used in the treatment of acute lymphoblastic leukemia (ALL), and resistance to glucocorticoids in leukemia cells confers poor prognosis. To elucidate mechanisms of glucocorticoid resistance, we determined the prednisolone sensitivity of primary leukemia cells from 444 patients newly diagnosed with ALL and found significantly higher expression of CASP1 (encoding caspase 1) and its activator NLRP3 in glucocorticoid-resistant leukemia cells, resulting from significantly lower somatic methylation of the CASP1 and NLRP3 promoters. Overexpression of CASP1 resulted in cleavage of the glucocorticoid receptor, diminished the glucocorticoid-induced transcriptional response and increased glucocorticoid resistance. Knockdown or inhibition of CASP1 significantly increased glucocorticoid receptor levels and mitigated glucocorticoid resistance in CASP1-overexpressing ALL. Our findings establish a new mechanism by which the NLRP3-CASP1 inflammasome modulates cellular levels of the glucocorticoid receptor and diminishes cell sensitivity to glucocorticoids. The broad impact on the glucocorticoid transcriptional response suggests that this mechanism could also modify glucocorticoid effects in other diseases

Water Vapor Vertical Profiles on Mars in Dust Storms Observed by TGO/NOMAD

It has been suggested that dust storms efficiently transport water vapor from the near‐surface to the middle atmosphere on Mars. Knowledge of the water vapor vertical profile during dust storms is important to understand water escape. During Martian Year 34, two dust storms occurred on Mars: a global dust storm (June to mid‐September 2018) and a regional storm (January 2019). Here we present water vapor vertical profiles in the periods of the two dust storms (Ls = 162–260° and Ls = 298–345°) from the solar occultation measurements by Nadir and Occultation for Mars Discovery (NOMAD) onboard ExoMars Trace Gas Orbiter (TGO). We show a significant increase of water vapor abundance in the middle atmosphere (40–100 km) during the global dust storm. The water enhancement rapidly occurs following the onset of the storm (Ls~190°) and has a peak at the most active period (Ls~200°). Water vapor reaches very high altitudes (up to 100 km) with a volume mixing ratio of ~50 ppm. The water vapor abundance in the middle atmosphere shows high values consistently at 60°S‐60°N at the growth phase of the dust storm (Ls = 195°–220°), and peaks at latitudes greater than 60°S at the decay phase (Ls = 220°–260°). This is explained by the seasonal change of meridional circulation: from equinoctial Hadley circulation (two cells) to the solstitial one (a single pole‐to‐pole cell). We also find a conspicuous increase of water vapor density in the middle atmosphere at the period of the regional dust storm (Ls = 322–327°), in particular at latitudes greater than 60°S

Untargeted UHPLC‐Q‐TOF‐HRMS based determination of discrimating compounds for oak species Quercus robur L. and Quercus petraea Liebl. identification

International audienceIntroduction Two species of oak are dominant in French forests: pedunculate oak (Quercus robur L.) and sessile oak (Quercus petraea Liebl.). Differentiating oak species is difficult, since features such as morphological characters, geographical origin and grain are not always relevant. Even if the former is generally richer in tannin compounds while the latter is often richer in aromatic compounds, the intra-species variability is high. The characterisation of the oak species remains a suitable indicator of the molecular composition and quality of the wood. Objectives The aim of this study was to determine differentiating molecules allowing oak species identification in order to assist in a suitable wood selection for a better oak tree valorisation since the selection of the oak wood to be used in the production of barrels plays an essential role in wine ageing. Materials and Methods Oak wood samples were collected both in forests and in cooperage timber yards. An untargeted metabolomic approach using ultra-high-pressure liquid chromatography qualitative time-of-flight high-resolution mass spectrometry (UHPLC-Q-TOF-HRMS) associated to multivariate statistical analyses (hierarchical ascendant clustering and partial least squares discriminant analysis) was implemented to determine molecular markers of oak species. Results Heartwood was identified as the suitable wood part to distinguish oak species. Discriminating molecules did not depend on the sample set. The pedunculate species showed overexpression of bartogenic derivatives while sessile oak presented a higher content in oak lactone precursors and in quercotriterpenosids. Conclusion The developed method allowed the identification of relevant compounds for oak species identification to a better wood valorisation and selection

Near infrared spectroscopy, a new tool to characterize wood for use by the cooperage industry

Confronted with growing competition, wood industry manufacturers are increasingly looking to optimize their processing processes and to control the quality of their finished products. Similarly, research and development teams in genetics and forest genetic improvement need new powerful tools enabling the evaluation of a large number of samples at a low cost and quickly. In this context, the development of non-destructive tools for measuring wood material performances (in all its forms: massive, de structured or reconstructed) is essential. Since the early 1990s, numerous research studies have explored the usefulness of using Near Infrared Spectroscopy (NIRS) to estimate the properties of wood material.This chapter, divided into two parts, aims to present a state of the art on the use of NIRS methodology in the wood domain. The first part describes technology and principles of its operation as well as its various fields of application for macromolecules, some physical and mechanical properties. The second part takes stock of the latest knowledge gained to date on the use of NIRS in the cooperage sector and takes example of an original industrial process for measuring the quality of oak wood directly on the production line