Wood Pulp Digetster Wall Corrosion Investigation

The modeling of the flow in a wood pulp digester is but one component of the investigation of the corrosion of digesters. This report describes the development of a Near-Wall-Model (NWM) that is intended to couple with a CFD model that determines the flow, heat, and chemical species transport and reaction within the bulk flow of a digester. Lubrication theory approximations were chosen from which to develop a model that could determine the flow conditions within a thin layer near the vessel wall using information from the interior conditions provided by a CFD calculation of the complete digester. The other conditions will be determined by coupled solutions of the wood chip, heat, and chemical species transport and chemical reactions. The NWM was to couple with a digester performance code in an iterative fashion to provide more detailed information about the conditions within the NW region. Process Simulations, Ltd (PSL) is developing the digester performance code. This more detailed (and perhaps more accurate) information from the NWM was to provide an estimate of the conditions that could aggravate the corrosion at the wall. It is intended that this combined tool (NWM-PSL) could be used to understand conditions at/near the wall in order to develop methods to reduce the corrosion. However, development and testing of the NWM flow model took longer than anticipated and the other developments (energy and species transport, chemical reactions and linking with the PSL code) were not completed. The development and testing of the NWM are described in this report. In addition, the investigation of the potential effects of a clear layer (layer reduced in concentration of wood chips) near the wall is reported in Appendix D. The existence of a clear layer was found to enhance the flow near the wall

Workshop on Functional Requirements for the Modeling of Fate and Transport of Waterborne CBRN Materials

The purpose of this Workshop on ''Functional Requirements for the Modeling of Fate and Transport of Waterborne CBRN Materials'' was to solicit functional requirements for tools that help Incident Managers plan for and deal with the consequences of industrial or terrorist releases of materials into the nation's waterways and public water utilities. Twenty representatives attended and several made presentations. Several hours of discussions elicited a set of requirements. These requirements were summarized in a form for the attendees to vote on their highest priority requirements. These votes were used to determine the prioritized requirements that are reported in this paper and can be used to direct future developments

Generating a series of fine spatial and temporal resolution land cover maps by fusing coarse spatial resolution remotely sensed images and fine spatial resolution land cover maps

Studies of land cover dynamics would benefit greatly from the generation of land cover maps at both fine spatial and temporal resolutions. Fine spatial resolution images are usually acquired relatively infrequently, whereas coarse spatial resolution images may be acquired with a high repetition rate but may not capture the spatial detail of the land cover mosaic of the region of interest. Traditional image spatial–temporal fusion methods focus on the blending of pixel spectra reflectance values and do not directly provide land cover maps or information on land cover dynamics. In this research, a novel Spatial–Temporal remotely sensed Images and land cover Maps Fusion Model (STIMFM) is proposed to produce land cover maps at both fine spatial and temporal resolutions using a series of coarse spatial resolution images together with a few fine spatial resolution land cover maps that pre- and post-date the series of coarse spatial resolution images. STIMFM integrates both the spatial and temporal dependences of fine spatial resolution pixels and outputs a series of fine spatial–temporal resolution land cover maps instead of reflectance images, which can be used directly for studies of land cover dynamics. Here, three experiments based on simulated and real remotely sensed images were undertaken to evaluate the STIMFM for studies of land cover change. These experiments included comparative assessment of methods based on single-date image such as the super-resolution approaches (e.g., pixel swapping-based super-resolution mapping) and the state-of-the-art spatial–temporal fusion approach that used the Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model (ESTARFM) and the Flexible Spatiotemporal DAta Fusion model (FSDAF) to predict the fine-resolution images, in which the maximum likelihood classifier and the automated land cover updating approach based on integrated change detection and classification method were then applied to generate the fine-resolution land cover maps. Results show that the methods based on single-date image failed to predict the pixels of changed and unchanged land cover with high accuracy. The land cover maps that were obtained by classification of the reflectance images outputted from ESTARFM and FSDAF contained substantial misclassification, and the classification accuracy was lower for pixels of changed land cover than for pixels of unchanged land cover. In addition, STIMFM predicted fine spatial–temporal resolution land cover maps from a series of Landsat images and a few Google Earth images, to which ESTARFM and FSDAF that require correlation in reflectance bands in coarse and fine images cannot be applied. Notably, STIMFM generated higher accuracy for pixels of both changed and unchanged land cover in comparison with other methods

Mapping annual forest cover by fusing PALSAR/PALSAR-2 and MODIS NDVI during 2007–2016

Advanced Land Observing Satellite (ALOS) Phased Arrayed L-band Synthetic Aperture Radar (PALSAR) HH and HV polarization data were used previously to produce annual, global 25 m forest maps between 2007 and 2010, and the latest global forest maps of 2015 and 2016 were produced by using the ALOS-2 PALSAR-2 data. However, annual 25 m spatial resolution forest maps during 2011–2014 are missing because of the gap in operation between ALOS and ALOS-2, preventing the construction of a continuous, fine resolution time-series dataset on the world's forests. In contrast, the MODerate Resolution Imaging Spectroradiometer (MODIS) NDVI images were available globally since 2000. This research developed a novel method to produce annual 25 m forest maps during 2007–2016 by fusing the fine spatial resolution, but asynchronous PALSAR/PALSAR-2 with coarse spatial resolution, but synchronous MODIS NDVI data, thus, filling the four-year gap in the ALOS and ALOS-2 time-series, as well as enhancing the existing mapping activity. The method was developed concentrating on two key objectives: 1) producing more accurate 25 m forest maps by integrating PALSAR/PALSAR-2 and MODIS NDVI data during 2007–2010 and 2015–2016; 2) reconstructing annual 25 m forest maps from time-series MODIS NDVI images during 2011–2014. Specifically, a decision tree classification was developed for forest mapping based on both the PALSAR/PALSAR-2 and MODIS NDVI data, and a new spatial-temporal super-resolution mapping was proposed to reconstruct the 25 m forest maps from time-series MODIS NDVI images. Three study sites including Paraguay, the USA and Russia were chosen, as they represent the world's three main forest types: tropical forest, temperate broadleaf and mixed forest, and boreal conifer forest, respectively. Compared with traditional methods, the proposed approach produced the most accurate continuous time-series of fine spatial resolution forest maps both visually and quantitatively. For the forest maps during 2007–2010 and 2015–2016, the results had greater overall accuracy values (>98%) than those of the original JAXA forest product. For the reconstructed 25 m forest maps during 2011–2014, the increases in classifications accuracy relative to three benchmark methods were statistically significant, and the overall accuracy values of the three study sites were almost universally >92%. The proposed approach, therefore, has great potential to support the production of annual 25 m forest maps by fusing PALSAR/PALSAR-2 and MODIS NDVI during 2007–2016

Impervious surface change mapping with an uncertainty-based spatial-temporal consistency model: a case study in Wuhan city using Landsat time-series datasets from 1987 to 2016

Detailed information on the spatial-temporal change of impervious surfaces is important for quantifying the effects of rapid urbanization. Free access of the Landsat archive provides new opportunities for impervious surface mapping with fine spatial and temporal resolution. To improve the classification accuracy, a temporal consistency (TC) model may be applied on the original classification results of Landsat time-series datasets. However, existing TC models only use class labels, and ignore the uncertainty of classification during the process. In this study, an uncertainty-based spatial-temporal consistency (USTC) model was proposed to improve the accuracy of the long time series of impervious surface classifications. In contrast to existing TC methods, the proposed USTC model integrates classification uncertainty with the spatial-temporal context information to better describe the spatial-temporal consistency for the long time-series datasets. The proposed USTC model was used to obtain an annual map of impervious surfaces in Wuhan city with Landsat Thematic Mapper (TM), Enhanced Thematic Mapper (ETM+), and Operational Land Imager (OLI) images from 1987 to 2016. The impervious surfaces mapped by the proposed USTC model were compared with those produced by the support vector machine (SVM) classifier and the TC model. The accuracy comparison of these results indicated that the proposed USTC model had the best performance in terms of classification accuracy. The increase of overall accuracy was about 4.23% compared with the SVM classifier, and about 1.79% compared with the TC model, which indicates the effectiveness of the proposed USTC model in mapping impervious surfaces from long-term Landsat sensor imagery

An iterative interpolation deconvolution algorithm for superresolution land cover mapping

Super-resolution mapping (SRM) is a method to produce a fine spatial resolution land cover map from coarse spatial resolution remotely sensed imagery. A popular approach for SRM is a two-step algorithm, which first increases the spatial resolution of coarse fraction images by interpolation, and then determines class labels of fine resolution pixels using the maximum a posteriori (MAP) principle. By constructing a new image formation process that establishes the relationship between observed coarse resolution fraction images and the latent fine resolution land cover map, it is found that the MAP principle only matches with area-to-point interpolation algorithms, and should be replaced by de-convolution if an area-to-area interpolation algorithm is to be applied. A novel iterative interpolation de-convolution (IID) SRM algorithm is proposed. The IID algorithm first interpolates coarse resolution fraction images with an area-to-area interpolation algorithm, and produces an initial fine resolution land cover map by de-convolution. The fine spatial resolution land cover map is then updated by re-convolution, back-projection and de-convolution iteratively until the final result is produced. The IID algorithm was evaluated with simulated shapes, simulated multi-spectral images, and degraded Landsat images, including comparison against three widely used SRM algorithms: pixel swapping, bilinear interpolation, and Hopfield neural network. Results show that the IID algorithm can reduce the impact of fraction errors, and can preserve the patch continuity and the patch boundary smoothness, simultaneously. Moreover, the IID algorithm produced fine resolution land cover maps with higher accuracies than those produced by other SRM algorithms

Measuring River Wetted Width from Remotely Sensed Imagery at the Subpixel Scale with a Deep Convolutional Neural Network

River wetted width (RWW) is an important variable in the study of river hydrological and biogeochemical processes. Presently, RWW is often measured from remotely sensed imagery and the accuracy of RWW estimation is typically low when coarse spatial resolution imagery is used because river boundaries often run through pixels that represent a region that is a mixture of water and land. Thus, when conventional hard classification methods are used in the estimation of RWW, the mixed pixel problem can become a large source of error. To address this problem, this paper proposes a novel approach to measure RWW at the sub‐pixel scale. Spectral unmixing is first applied to the imagery to obtain a water fraction image that indicates the proportional coverage of water in image pixels. A fine spatial resolution river map from which RWW may be estimated is then produced from the water fraction image by super‐resolution mapping (SRM). In the SRM analysis, a deep convolutional neural network (CNN) is used to eliminate the negative effects of water fraction errors and reconstruct the geographical distribution of water. The proposed approach is assessed in two experiments, with the results demonstrating that the CNN based SRM model can effectively estimate sub‐pixel scale details of rivers, and that the accuracy of RWW estimation is substantially higher than that obtained from the use of a conventional hard image classification. The improvement shows that the proposed method has great potential to derive more accurate RWW values from remotely sensed imagery

Spatial–Temporal Analysis of Greenness and Its Relationship with Poverty in China

Ecological environmental protection and poverty alleviation are of great significance for the study of human–land relationship coordination and sustainable development, and they have also been a focus of attention in China in the past few decades. In this study, we chose 13 contiguous poverty-stricken areas in China as the study area. Using MODIS Leaf Area Index (LAI) data from 2000 to 2020, the spatial–temporal changes in greenness were obtained using the Bayesian spatial–temporal model (BYM). Spatial autocorrelation was used to identify the spatial distribution of poverty using socio-economic statistical data. Driving factors, including natural factors, poverty factors, and the Grain for Green Policy (GTGP), and their influence on greenness were analyzed by using the Geodetector model for detecting spatial differentiation and factors’ interactions. The results showed the following: (1) In 13 contiguous poverty-stricken areas (CPSAs) in China, 59% of the area presented an increasing trend of greenness. (2) In 2000, the high poverty levels with larger MPI values were widely distributed. After 20 years, the overall MPI value was lower, except in some northwest regions with increased MPI values. The spatial autocorrelation of poverty, which relates to the mutual influence of poverty in adjacent areas, also decreased. (3) In the study area, 65.24% of the regions showed strong synergistic effect between greening progress and poverty reduction in the interaction between poverty status and green development. With the improvement of greenness level, the positive correlation between poverty alleviation and ecological environment improvement has become increasingly close. (4) The impacts of interaction factors with the highest q values changed from temperature interacting with precision to regional division interacting with the Grain for Green Policy. The conclusions are that from 2000 to 2020, the impact of natural factors, geographical division, and poverty status on greenness has shown a decreasing trend; The effect of the Grain for Green Policy is gradually increasing; At the same time, the interaction and overlapping effects between the Grain for Green Policy and poverty were increasing. Taking into account the needs of ecological environment, poverty alleviation, and rural revitalization, this research provides valuable reference for formulating and implementing relevant policies based on the actual situation in different regions to promote harmonious coexistence between human-land relationship

PP-wave String Interactions from String Bit Model

We construct the string states $|O_{p}^J>_J$, $|O_{q}^{J_1}>_{{J_1}{J_2}}$ and $|O_{0}^{J_{1}J_{2}}>_{{J_1}{J_2}}$ in the Hilbert space of the quantum mechanical orbifold model so as to calculate the three point functions and the matrix elements of the light-cone Hamiltonian from the interacting string bit model. With these string states we show that the three point functions and the matrix elements of the Hamiltonian derived from the interacting string bit model up to $g^{2}_2$ order precisely match with those computed from the perturbative SYM theory in BMN limit.Comment: 20 pages, no figure, LaTeX, some changes made and references adde