REPORT ON A SMALL COLLECTION OF PARASITIC HYMENOPTERA FROM JAVA AND SUMATRA

abstract not availabl

Lectotypes of the Species of Hymenoptera (Except Apoidea) Described by Abbé Provancher

xBio:D Automated Uploa

Retarding field energy analyser ion current calibration and transmission

International audienceAccurate measurement of ion current density and ion energy distributions (IED) is often critical for plasma processes in both industrial and research settings. Retarding field energy analyzers (RFEA) have been used to measure IEDs because they are considered accurate, relatively simple and cost effective. However, their usage for critical measurement of ion current density is less common due to difficulties in estimating the proportion of incident ion current reaching the current collector through the RFEA retarding grids. In this paper an RFEA has been calibrated to measure ion current density from an ion beam at pressures ranging from 0.5 to 50.0 mTorr. A unique method is presented where the currents generated at each of the retarding grids and the RFEA upper face are measured separately, allowing the reduction in ion current to be monitored and accounted for at each stage of ion transit to the collector. From these I-V measurements a physical model is described. Subsequently, a mathematical description is extracted which includes parameters to account for grid transmissions, upper face secondary electron emission and collisionality. Pressure-dependant calibration factors can be calculated from least mean square best fits of the collector current to the model allowing quantitative measurement of ion current density

'I know they are not trained in dementia': Addressing the need for specialist dementia training for home care workers

Global population ageing has meant a rapid increase in the numbers of older people with dementia, most of whom live in their own homes. Staying at home is an important determinant of health and well‐being. As care needs increase, the quality of community support which older people receive directly influences their capacity to remain in their own homes. While many are supported informally by family carers, formal support provided by home care workers often enables them to remain at home for longer period. However, providing community‐based care for people with dementia can be challenging. Workers often lack training in dementia‐specific care for clients with increasingly complex needs, and typically work without direct supervision. As the demand for person‐centred home care for people with dementia increases, specialist dementia training for home care workers is urgently needed. In this qualitative study, we used in‐depth interviews of a purposive sample, comprising 15 family carers and four older people with dementia, to understand the experience of receiving community care. Data analysis was guided by Braun and Clarke's approach to thematic analysis and revealed the following five overlapping themes, relating to home care workers’ understanding of dementia, person‐centred care, communication and rapport, mutual collaboration, and the influence of organisational constraints on continuity of care. Although participants acknowledged that service providers operated under challenging circumstances, they were frustrated with home care workers’ lack of dementia knowledge and inconsistent staff rostering. Conversely, an understanding of the lived experience of dementia, effective communication and rapport, and continuity of care contributed significantly to a positive experience of receiving care. The findings of this study will be used to inform the essential elements of a training program aimed at enabling and empowering a skilled, specialist home care workforce to support older people with dementia to live well at home for as long as possible

What constitutes 'good' home care for people with dementia? An investigation of the views of home care service recipients and providers

BACKGROUND: Our objective was to explore what people receiving and providing care consider to be ‘good’ in-home care for people living with dementia. METHODS: We conducted 36 in-depth interviews and two focus groups with key stakeholders in Australia in the first quarter of 2018. Participants included those receiving care (4 people living with dementia, 15 family carers) or providing care (9 case managers, 5 service managers, 10 home care workers). Qualitative thematic analysis was guided by Braun and Clarke’s six-step approach. RESULTS: Consensus was reached across all groups on five themes considered as important for good in-home dementia care: 1) Home care workers’ understanding of dementia and its impact; 2) Home care workers’ demonstrating person-centred care and empathy in their care relationship with their client; 3) Good relationships and communication between care worker, person with dementia and family carers; 4) Home care workers’ knowing positive practical strategies for changed behaviours; 5) Effective workplace policies and workforce culture. The results contributed to the co-design of a dementia specific training program for home care workers. CONCLUSIONS: It is crucial to consider the views and opinions of each stakeholder group involved in providing/receiving dementia care from home care workers, to inform workforce training, education program design and service design. Results can be used to inform and empower home care providers, policy, and related decision makers to guide the delivery of improved home care services. TRIAL REGISTRATION: ACTRN 12619000251123

Laser Drilling: Drilling with the Power of Light Phase 1: Feasibility Study

A laser drilling research team was formed from members of academia, industry and national laboratory to explore the feasibility of using modern high-powered lasers to drill and complete oil and gas wells. The one-year Phase 1 study discussed in this report had the goals of quantifying the amount of pulsed infrared laser energy needed to spall and melt rock of varying lithologies and to investigate the possibility of accomplishing the same task in water under atmospheric conditions. Previous work by some members of this team determined that continuous wave lasers of varying wavelengths have more than enough power to cut, melt and vaporize rock. Samples of sandstone, limestone, and shale were prepared for laser beam interaction with a 1.6 kW pulsed Nd:YAG laser beam to determine how the beam's size, power, repetition rate, pulse width, exposure time and energy can affect the amount of energy transferred to the rock for the purposes of spallation, melting and vaporization. The purpose of the laser rock interaction experiment was to determine the threshold parameters required to remove a maximum rock volume from the samples while minimizing energy input. Absorption of radiant energy from the laser beam gives rise to the thermal energy transfer required for the destruction and removal of the rock matrix. Results from the tests indicate that each rock type has a set of optimal laser parameters to minimize specific energy (SE) values as observed in a set of linear track and spot tests. In addition, it was observed that the rates of heat diffusion in rocks are easily and quickly overrun by absorbed energy transfer rates from the laser beam to the rock. As absorbed energy outpaces heat diffusion by the rock matrix, local temperatures can rise to the melting points of the minerals and quickly increase observed SE values. The lowest SE values are obtained in the spalling zone just prior to the onset of mineral melt. The current study determined that using pulsed lasers could accomplish removing material from rock more efficiently than continuous wave lasers. The study also determined that reducing the effect of secondary energy absorbing mechanisms resulted in lower energy requirements in shale and, to some extent, in sandstones. These secondary mechanisms are defined as physical processes that divert beam energy from directly removing rock, and may include thermally-induced phase behavior changes of rock minerals (i.e., melting, vaporization, and dissociation) and fractures created by thermal expansion. Limestone is spalled by a different mechanism and does not seem to be as affected by secondary mechanisms. It was also shown that the efficiency of the cutting mechanism improved by saturating porous rock samples with water, and that a laser beam injected directly through a water layer at a sandstone sample was able to spall and melt the sample

What constitutes ‘good’ home care for people with dementia? An investigation of the views of home care service recipients and providers

BACKGROUND: Our objective was to explore what people receiving and providing care consider to be 'good' in-home care for people living with dementia. METHODS: We conducted 36 in-depth interviews and two focus groups with key stakeholders in Australia in the first quarter of 2018. Participants included those receiving care (4 people living with dementia, 15 family carers) or providing care (9 case managers, 5 service managers, 10 home care workers). Qualitative thematic analysis was guided by Braun and Clarke's six-step approach. RESULTS: Consensus was reached across all groups on five themes considered as important for good in-home dementia care: 1) Home care workers' understanding of dementia and its impact; 2) Home care workers' demonstrating person-centred care and empathy in their care relationship with their client; 3) Good relationships and communication between care worker, person with dementia and family carers; 4) Home care workers' knowing positive practical strategies for changed behaviours; 5) Effective workplace policies and workforce culture. The results contributed to the co-design of a dementia specific training program for home care workers. CONCLUSIONS: It is crucial to consider the views and opinions of each stakeholder group involved in providing/receiving dementia care from home care workers, to inform workforce training, education program design and service design. Results can be used to inform and empower home care providers, policy, and related decision makers to guide the delivery of improved home care services. TRIAL REGISTRATION: ACTRN 12619000251123

Identity and technology: Organizational control of knowledge-intensive work

Much has been written about the functioning of managerial ideologies in identity-based organizational control. However, less attention has been given to the role of information and communication technologies (ICTs) and identity defined by a technological discourse in regulating knowledge-intensive work. The purpose of this research is to examine the roles of identity and ICTs in the control of knowledge-intensive work. A case study of a technology service organization reveals that the construction and consumption of a technologist identity operate as organizational control, and that ICTs enable the functioning of a dialectic of technological control. This study also demonstrates the paradoxical nature of work knowledge that both empowers and controls knowledge-workers

Reduced Levels of Membrane-Bound Alkaline Phosphatase Are Common to Lepidopteran Strains Resistant to Cry Toxins from Bacillus thuringiensis

Development of insect resistance is one of the main concerns with the use of transgenic crops expressing Cry toxins from the bacterium Bacillus thuringiensis. Identification of biomarkers would assist in the development of sensitive DNA-based methods to monitor evolution of resistance to Bt toxins in natural populations. We report on the proteomic and genomic detection of reduced levels of midgut membrane-bound alkaline phosphatase (mALP) as a common feature in strains of Cry-resistant Heliothis virescens, Helicoverpa armigera and Spodoptera frugiperda when compared to susceptible larvae. Reduced levels of H. virescens mALP protein (HvmALP) were detected by two dimensional differential in-gel electrophoresis (2D-DIGE) analysis in Cry-resistant compared to susceptible larvae, further supported by alkaline phosphatase activity assays and Western blotting. Through quantitative real-time polymerase chain reaction (qRT-PCR) we demonstrate that the reduction in HvmALP protein levels in resistant larvae are the result of reduced transcript amounts. Similar reductions in ALP activity and mALP transcript levels were also detected for a Cry1Ac-resistant strain of H. armigera and field-derived strains of S. frugiperda resistant to Cry1Fa. Considering the unique resistance and cross-resistance phenotypes of the insect strains used in this work, our data suggest that reduced mALP expression should be targeted for development of effective biomarkers for resistance to Cry toxins in lepidopteran pests