1,342 research outputs found
Design issues of a variable thermal resistance
Some years ago we have proposed a thermal mount with electronically variable
thermal resistance [1]. In this earlier work the feasibility of such a
structure has been demonstrated. Now we intend to realize this mount in a
maturated form, suitable to the everyday use in the practice of package thermal
qualification and modeling. The design of such a device raises a number of new
questions and problems. The present paper is dealing with these problems and
the possible solutions.Comment: Submitted on behalf of TIMA Editions
(http://irevues.inist.fr/tima-editions
Evaluation of a locally homogeneous flow model of spray combustion
A model of spray combustion which employs a second-order turbulence model was developed. The assumption of locally homogeneous flow is made, implying infinitely fast transport rates between the phase. Measurements to test the model were completed for a gaseous n-propane flame and an air atomized n-pentane spray flame, burning in stagnant air at atmospheric pressure. Profiles of mean velocity and temperature, as well as velocity fluctuations and Reynolds stress, were measured in the flames. The predictions for the gas flame were in excellent agreement with the measurements. The predictions for the spray were qualitatively correct, but effects of finite rate interphase transport were evident, resulting in a overstimation of the rate development of the flow. Predictions of spray penetration length at high pressures, including supercritical combustion conditions, were also completed for comparison with earlier measurements. Test conditions involved a pressure atomized n-pentane spray, burning in stagnant air at pressures of 3, 5, and 9 MPa. The comparison between predictions and measurements was fair. This is not a very sensitive test of the model, however, and further high pressure experimental and theoretical results are needed before a satisfactory assessment of the locally homogeneous flow approximation can be made
Thermal Enhancement of Cellular Radiation Damage: A Review of Complementary and Synergistic Effects
Hyperthermia treatment can kill mammalian cells in a time and temperature dependent manner. Thermal sensitivity varies extensively among various cell lines in culture and cellular molecular and ultrastructural studies have not resolved which cellular mechanisms underlie thermal cell killing and radiosensitization. The response of cells to heat and radiation are complementary under certain conditions found in human tumors, such as hypoxia, low pH, low nutrient and the S-phase of the cell cycle. Thus, hyperthermia can be used as a complementary treatment modality in the radiotherapy of human cancer. Further studies show that heat treatment causes radiosensitization which is in part associated with the inhibition of repair of radiation damage and is strongly dependent on temperature and on the sequencing. In addition, the conditions such as pH and oxygenation during treatment sequencing can influence the degree of recovery of cells. These factors may be exploited in optimizing therapeutic gain in clinical cancer therapy. Data are shown that transformation from the normal to the tumorigenic state causes random small changes in radiosensitivity and heat sensitivity. Also, treatments combining heat and radiation can lead to increased or decreased transformation in cells depending on the treatment sequence
Characterization and Modeling of an Electro-thermal MEMS Structure
Thermal functional circuits are an interesting and perspectivic group of the
MEMS elements. A practical realization is called Quadratic Transfer
Characteristic (QTC) element which driving principle is the Seebeck-effect. In
this paper we present the analyses of a QTC element from different
perspectives. To check the real behavior of the device, we measured a few,
secondary properties of the structure which correspond to special behavior
because these properties can not be easily derived from the main
characteristics.Comment: Submitted on behalf of EDA Publishing Association
(http://irevues.inist.fr/handle/2042/16838
The Effect of Glutathione Depletion by Diamide, Diethyl Maleate or Buthione Sulfoximine on the Surface Structure of Mouse L-Cells
Radiosensitizers that act by reducing glutathione levels have been studied by many workers as agents to enhance the killing of hypoxic tumour cells. In this paper we describe a scanning electron microscope (SEM) study of the surface morphology of mouse L-cells after exposure to three of these: diazenedicarboxylic acid bis N, N-dimethylamide (diamide), DL-buthionine-S, R-sulfoximine (BSO) and diethyl maleate (DEM). Diamide at 0.1 to 0.6 mMol/L for 10 min produced large blebs on the cell surface as seen in the SEM. Transmission electron microscope (TEM) images show that these are clear, featureless regions of cytoplasm. BSO treatment for 24 hat 0.5 to 2.0 mMol/L, by contrast, left the surface similar to control cells. DEM at 0.5 mMol/L for 2 h produces small blebs over the cell surface and a reduction in the number of microvilli. A combined 24 h BSO treatment with 2 h of DEM produced large blebs, which were similar in TEM micrographs to those produced by diamide. Thus, although all three sensitizers reduce glutathione levels, they have different effects on cellular morphology and hence such secondary effects may account for the different degrees of radiation sensitization seen with these agents
Oxidation of 3,5-di-tert-butylcatechol and 2-aminophenol by molecular oxygen catalyzed by an organocatalyst
1,3,2-Oxazaphospholes are able to catalyze the oxidation of 3,5-di-
tert
-butylcatechol with
3
O
2
to the corresponding
o
-quinone and
2-aminophenol to 2-aminophenoxazine-3-one in methanol. In both
the cases, an overall third order reaction rate equation and a new
type of biomimetic organocatalyst for oxidation reactions was found.
A one electron transfer of the phenolate, which is formed through
the deprotonation of the substrates by the catalyst, to dioxygen
seems to be rate-determining step
A Test of Independence in Two-Way Contingency Tables Based on Maximal Correlation
Cataloged from PDF version of article.Maximal correlation has several desirable properties as a measure of dependence, including the fact that it vanishes if and only if the variables are independent. Except for a few special cases, it is hard to evaluate maximal correlation explicitly. We focus on two-dimensional contingency tables and discuss a procedure for estimating maximal correlation, which we use for constructing a test of independence. We compare the maximal correlation test with other tests of independence by Monte Carlo simulations. When the underlying continuous variables are dependent but uncorrelated, we point out some cases for which the new test is more powerful
Intensity-based elastic registration incorporating anisotropic landmark errors and rotational information
Purpose: Thin-plate splines (TPS) represent an effective tool for estimating the deformation that warps one set of landmarks to another based on the physical equivalent of thin metal sheets. In the original formulation, data used to estimate the deformation field are restricted to landmark locations only and thus does not allow to incorporate information about the rotation of the image around the landmark. It furthermore assumes that landmark positions are known exactly which is not the case in real world applications. These localization inaccuracies are propagated to the entire deformation field as each landmark has a global influence. We propose to use a TPS approximation method that incorporates anisotropic landmark errors and rotational information and integrate it into a hierarchical elastic registration framework (HERA). The improvement of the registration performance has been evaluated. Methods: The proposed TPS approximation scheme integrates anisotropic landmark errors with rotational information of the landmarks. The anisotropic landmark errors are represented by their covariance matrices estimated directly from the image data as a minimal stochastic localization error, i.e. the Cramér-Rao bound. The rotational attribute of each landmark is characterized by an additional angular landmark, thus doubling the number of landmarks in the TPS model. This allows the TPS approximation to better cope up with local deformations. Results: We integrated the proposed TPS approach into the HERA registration framework and applied it to register 161 image pairs from a digital mammogram database. Experiments showed that the mean squared error using the proposed TPS approximation was superior to pure TPS interpolation. On artificially deformed breast images HERA, with the proposed TPS approximation, performed significantly better than the state-of-the-art registration method presented by Rueckert. Conclusion: The TPS approximation approach proposed in this publication allows to incorporate anisotropic landmark errors as well as rotational information. The integration of the method into an intensity-based hierarchical non-rigid registration framework is straightforward and improved the registration quality significantl
- …