22,043 research outputs found
NOSS/ALDCS analysis and system requirements definition
The results of system analyses and implementation studies of an advanced location and data collection system (ALDCS) , proposed for inclusion on the National Oceanic Satellite System (NOSS) spacecraft are reported. The system applies Doppler processing and radiofrequency interferometer position location technqiues both alone and in combination. Aspects analyzed include: the constraints imposed by random access to the system by platforms, the RF link parameters, geometric concepts of position and velocity estimation by the two techniques considered, and the effects of electrical measurement errors, spacecraft attitude errors, and geometric parameters on estimation accuracy. Hardware techniques and trade-offs for interferometric phase measurement, ambiguity resolution and calibration are considered. A combined Doppler-interferometer ALDCS intended to fulfill the NOSS data validation and oceanic research support mission is also described
Analysis of Meteorological Satellite location and data collection system concepts
A satellite system that employs a spaceborne RF interferometer to determine the location and velocity of data collection platforms attached to meteorological balloons is proposed. This meteorological advanced location and data collection system (MALDCS) is intended to fly aboard a low polar orbiting satellite. The flight instrument configuration includes antennas supported on long deployable booms. The platform location and velocity estimation errors introduced by the dynamic and thermal behavior of the antenna booms and the effects of the presence of the booms on the performance of the spacecraft's attitude control system, and the control system design considerations critical to stable operations are examined. The physical parameters of the Astromast type of deployable boom were used in the dynamic and thermal boom analysis, and the TIROS N system was assumed for the attitude control analysis. Velocity estimation error versus boom length was determined. There was an optimum, minimum error, antenna separation distance. A description of the proposed MALDCS system and a discussion of ambiguity resolution are included
Race, Class, And Gender In Boys\u27 Education: Repositioning Intersectionality Theory
Boys\u27 identities are distinctly gendered, racialized, and classed across disparate social and cultural contexts. Related intersectional identity processes are associated with boys\u27 academic success. While intersectionality has been utilized throughout boys\u27 education scholarship, a limited, light touch approach is often enacted. As a critical logic of interpretation, intersectionality theory accounts for race, class, and gender within equity-based empirical studies. The authors contend insufficient engagement with intersectionality may lead educational research on boys\u27 social and learner identities to become static. Examining boys\u27 identities through intersectional approaches reveals more complex insights particularly related to their school engagement. Critical of the recent boy crisis literature, this article strives to compel theorists of boys\u27 education to more fully leverage the history, constructs, and epistemologies of intersectionality
Post-flight analyses of the crystals from the M0003-14 quartz crystal microbalance experiment
Quartz Crystal Microbalances constructed by QCM Research were flown on the leading and trailing edges of LDEF as one of the sub-experiments of M0003. Response of the crystals coated with 150 A of In2O3 was recorded during the first 424 days of the mission. A second QCM with crystals coated with 150 A of ZnS was also flown but not monitored. After the flight, the QCM's were disassembled and analyzed in The Aerospace Corporation laboratories. The samples included the crystals from the leading and trailing edge samples of both types of coatings along with the reference crystals, which were inside the QCM housing. Analyses were performed by scanning electron microscopy, energy dispersive x-ray analyses, x-ray photoelectron spectroscopy, ion microprobe mass analysis, and reflectance spectroscopy in the infrared and UV/visible regions. The crystals are contaminated predominantly with silicone compounds. The contamination is higher on the leading edge than on the trailing edge and higher on the exposed crystals than on the reference crystals
Pseudo-noise test set for communication system evaluation
A test set for communications systems is described which includes a pseudo noise sequence generator providing a test signal that is fed to a pair of signal channels. The first channel includes a spectrum shaping filter and a conditioning amplifier. The second channel includes a variable delay circuit, a spectrum shaping filter matched to the first filter, and an amplifier. The output of the first channel was applied to the system under test. The output of the system and the output of the second channel are compared to determine the degree of distortion suffered by the test signal due to the communications system
Method of and means for testing a tape record/playback system
A tape record/playback system was tested by first deriving an analog test signal and a band-limited digital reference signal from a pseudo-noise sequence generator driven by a clock signal. It recorded the signals on respective tracks of the system during operation in a record mode. During the playback mode of operation of the system, a delayed analog reference signal without time base variations was reconstructed from the played back reference signal. It was compared with the played back test signal in order to obtain an error signal that was a measure of the performance of the system
Adiabatic and Non-Adiabatic Contributions to the Free Energy from the Electron-Phonon Interaction for Na, K, Al, and Pb
We calculate the adiabatic contributions to the free energy due to the
electron--phonon interaction at intermediate temperatures, for the elemental metals Na, K, Al, and Pb. Using our
previously published results for the nonadiabatic contributions we show that
the adiabatic contribution, which is proportional to at low
temperatures and goes as at high temperatures, dominates the
nonadiabatic contribution for temperatures above a cross--over temperature,
, which is between 0.5 and 0.8 , where is the melting
temperature of the metal. The nonadiabatic contribution falls as for
temperatures roughly above the average phonon frequency.Comment: Updated versio
Observation of Single Transits in Supercooled Monatomic Liquids
A transit is the motion of a system from one many-particle potential energy
valley to another. We report the observation of transits in molecular dynamics
(MD) calculations of supercooled liquid argon and sodium. Each transit is a
correlated simultaneous shift in the equilibrium positions of a small local
group of particles, as revealed in the fluctuating graphs of the particle
coordinates versus time. This is the first reported direct observation of
transit motion in a monatomic liquid in thermal equilibrium. We found transits
involving 2 to 11 particles, having mean shift in equilibrium position on the
order of 0.4 R_1 in argon and 0.25 R_1 in sodium, where R_1 is the nearest
neighbor distance. The time it takes for a transit to occur is approximately
one mean vibrational period, confirming that transits are fast.Comment: 19 pages, 8 figure
An \emph{ab initio} method for locating characteristic potential energy minima of liquids
It is possible in principle to probe the many--atom potential surface using
density functional theory (DFT). This will allow us to apply DFT to the
Hamiltonian formulation of atomic motion in monatomic liquids [\textit{Phys.
Rev. E} {\bf 56}, 4179 (1997)]. For a monatomic system, analysis of the
potential surface is facilitated by the random and symmetric classification of
potential energy valleys. Since the random valleys are numerically dominant and
uniform in their macroscopic potential properties, only a few quenches are
necessary to establish these properties. Here we describe an efficient
technique for doing this. Quenches are done from easily generated "stochastic"
configurations, in which the nuclei are distributed uniformly within a
constraint limiting the closeness of approach. For metallic Na with atomic pair
potential interactions, it is shown that quenches from stochastic
configurations and quenches from equilibrium liquid Molecular Dynamics (MD)
configurations produce statistically identical distributions of the structural
potential energy. Again for metallic Na, it is shown that DFT quenches from
stochastic configurations provide the parameters which calibrate the
Hamiltonian. A statistical mechanical analysis shows how the underlying
potential properties can be extracted from the distributions found in quenches
from stochastic configurations
Non-locality and gauge freedom in Deutsch and Hayden's formulation of quantum mechanics
Deutsch and Hayden have proposed an alternative formulation of quantum
mechanics which is completely local. We argue that their proposal must be
understood as having a form of `gauge freedom' according to which
mathematically distinct states are physically equivalent. Once this gauge
freedom is taken into account, their formulation is no longer local.Comment: 3 page
- …