Quantitative insights into the dislocation source behavior of twin boundaries suggest a new dislocation source mechanism

Pop-in statistics from nanoindentation with spherical indenters are used to determine the stress required to activate dislocation sources in twin boundaries (TBs) in copper and its alloys. The TB source activation stress is smaller than that needed for bulk single crystals, irrespective of the indenter size, dislocation density and stacking fault energy. Because an array of pre-existing Frank partial dislocations is present at a TB, we propose that dislocation emission from the TB occurs by the Frank partials splitting into Shockley partials moving along the TB plane and perfect lattice dislocations, both of which are mobile. The proposed mechanism is supported by recent high resolution transmission electron microscopy images in deformed nanotwinned (NT) metals and may help to explain some of the superior properties of nanotwinned metals (e.g. high strength and good ductility), as well as the process of detwinning by the collective formation and motion of Shockley partial dislocations along TBs. Graphic abstract: [Figure not available: see fulltext.] © 2021, The Author(s)

An explanation for the shape of nanoindentation unloading curves based on finite element simulation

Current methods for measuring hardness and modulus from nanoindentation load-displacement data are based on Sneddon`s equations for the indentation of an elastic half-space by an axially symmetric rigid punch. Recent experiments have shown that nanoindentation unloading data are distinctly curved in a manner which is not consistent with either the flat punch or the conical indenter geometries frequently used in modeling, but are more closely approximated by a parabola of revolution. Finite element simulations for conical indentation of an elastic-plastic material are presented which corroborate the experimental observations, and from which a simple explanation for the shape of the unloading curve is derived. The explanation is based on the concept of an effective indenter shape whose geometry is determined by the shape of the plastic hardness impression formed during indentation

TokaMaker: An open-source time-dependent Grad-Shafranov tool for the design and modeling of axisymmetric fusion devices

In this paper, we present a new static and time-dependent MagnetoHydroDynamic (MHD) equilibrium code, TokaMaker, for axisymmetric configurations of magnetized plasmas, based on the well-known Grad-Shafranov equation. This code utilizes finite element methods on an unstructured triangular grid to enable capturing accurate machine geometry and simple mesh generation from engineering-like descriptions of present and future devices. The new code is designed for ease of use without sacrificing capability and speed through a combination of Python, Fortran, and C/C++ components. A detailed description of the numerical methods of the code, including a novel formulation of the boundary conditions for free-boundary equilibria, and validation of the implementation of those methods using both analytic test cases and cross-code validation is shown. Results show expected convergence across tested polynomial orders for analytic and cross-code test cases

Nanoindentation of Soft Films on Hard Substrates:The Importance of Pile-Up

Nanoindentation is used for measuring mechanical properties of thin films. This paper addresses potential measurement errors caused by pile-up when soft films deposited on hard substrates are tested this way. Pile-up is exacerbated in soft film/hard substrate systems because of the constraint the substrate exerts on plastic deformation of the film. To examine pile-up effects, Al films 240 and 1700 nm thick were deposited on hard glass and tested by standard nanoindentation. In Al/glass, the film and substrate have similar elastic moduli; thus, any unusual behavior in nanoindentation results may be attributed to differences in plastic flow alone. SEM examination of nanoindentation hardness impressions in the film revealed that common methods for analyzing nanoindentation data underestimate the true contact areas by as much as 80%, which results in overestimations of the hardness and modulus by as much as 80 and 35%, respectively. Sources of these errors and their effect on measurement of hardness and elastic modulus are discussed, and a simple model for the composite hardness of the film/substrate system is developed. This model could prove useful when it is not possible to make indentations shallow enough to avoid substrate effects

Cracking During Nanoindentation and its Use in the Measurement of Fracture Toughness

Results of an investigation aimed at developing a technique by which the fracture toughness of a thin film or small volume can be determined in nanoindentation experiments are reported. The method is based on the radial cracking which occurs when brittle materials are deformed by a sharp indenter such as a Vickers or Berkovich diamond. In microindentation experiments, the lengths of radial cracks have been found to correlate reasonably well with fracture toughness, and a simple semi-empirical method has been developed to compute the toughness from the crack lengths. However, a problem is encountered in extending this method into the nanoindentation regime with the standard Berkovich indenter in that there are well defined loads, called cracking thresholds, below which indentation cracking does not occur in most brittle materials. We have recently found that the problems imposed by the cracking threshold can be largely overcome by using an indenter with the geometry of the comer of a cube. For the cube-corner indenter, cracking thresholds in most brittle materials are as small as 1 mN ({approximately}0.1 grams). In addition, the simple, well-developed relation between toughness and crack length used for the Vickers indenter in the microindentation regime can be used for the cube-corner indenter in the nanoindentation regime provided a different empirical constant is used

Cracking during nanoindentation and its use in the measurement of fracture toughness

Results of an investigation aimed at developing a technique by which the fracture toughness of a thin film or small volume can be determined in nanoindentation experiments are reported. The method is based on the radial cracking which occurs when brittle materials are deformed by a sharp indenter such as a Vickers or Berkovich diamond. In microindentation experiments, the lengths of radial cracks have been found to correlate reasonably well with fracture toughness, and a simple semi-empirical method has been developed to compute the toughness from the crack lengths. However, a problem is encountered in extending this method into the nanoindentation regime with the standard Berkovich indenter in that there are well defined loads, called cracking thresholds, below which indentation cracking does not occur in most brittle materials. We have recently found that the problems imposed by the cracking threshold can be largely overcome by using an indenter with the geometry of the comer of a cube. For the cube-corner indenter, cracking thresholds in most brittle materials are as small as 1 mN ({approximately}0.1 grams). In addition, the simple, well-developed relation between toughness and crack length used for the Vickers indenter in the microindentation regime can be used for the cube-corner indenter in the nanoindentation regime provided a different empirical constant is used

Similarity Relationships in Creep Contacts and Applications in Nanoindentation Tests

ABSTRACT The study of indentation responses of rate-dependent (viscoplastic or creeping) solids has generally focused on the relationship between indentation hardness and an effective strain rate, which can be defined from a similarity transformation of the governing equations. The strain rate sensitivity exponent can be determined from the slope of a log-log plot of the hardness versus effective strain rate, while determining other constitutive parameters requires a knowledge of the relationship between contact size, shape, and indentation depth. In this work, finite element simulations have shown that the effects of non-axisymmetric contact and crystallography are generally negligible. Theoretical predictions agree well with real nanoindentation measurements on amorphous selenium when tested above glass transition temperature, but deviate quite significantly for experiments on high-purity indium, coarse-grained aluminum, and nanocrystalline nickel. Such a discrepancy is likely to result from the transient creep behavior

Eff ect of a congregation-based intervention on uptake of HIV testing and linkage to care in pregnant women in Nigeria (Baby Shower): a cluster randomised trial

Background Few eff ective community-based interventions exist to increase HIV testing and uptake of antiretroviral therapy (ART) in pregnant women in hard-to-reach resource-limited settings. We assessed whether delivery of an intervention through churches, the Healthy Beginning Initiative, would increase uptake of HIV testing in pregnant women compared with standard health facility referral. Methods In this cluster randomised trial, we enrolled self-identifi ed pregnant women aged 18 years and older who attended churches in southeast Nigeria. We randomised churches (clusters) to intervention or control groups, stratifi ed by mean annual number of infant baptisms (<80 vs ≥80). The Healthy Beginning Initiative intervention included health education and on-site laboratory testing implemented during baby showers in intervention group churches, whereas participants in control group churches were referred to health facilities as standard. Participants and investigators were aware of church allocation. The primary outcome was confi rmed HIV testing. This trial is registered with ClinicalTrials.gov, identifi er number NCT 01795261. Findings Between Jan 20, 2013, and Aug 31, 2014, we enrolled 3002 participants at 40 churches (20 per group). 1309 (79%) of 1647 women attended antenatal care in the intervention group compared with 1080 (80%) of 1355 in the control group. 1514 women (92%) in the intervention group had an HIV test compared with 740 (55%) controls (adjusted odds ratio 11·2, 95% CI 8·77–14·25; p<0·0001). Interpretation Culturally adapted, community-based programmes such as the Healthy Beginning Initiative can be eff ective in increasing HIV screening in pregnant women in resource-limited settings

Fourier Analysis of Correlated Monte Carlo Importance Sampling

International audienceFourier analysis is gaining popularity in image synthesis, as a tool for the analysis of error in Monte Carlo (MC) integration. Still, existing tools are only able to analyze convergence under simplifying assumptions (such as randomized shifts) which are not applied in practice during rendering. We reformulate the expressions for bias and variance of sampling-based integrators to unify non-uniform sample distributions (importance sampling) as well as correlations between samples while respecting finite sampling domains. Our unified formulation hints at fundamental limitations of Fourier-based tools in performing variance analysis for MC integration. This non-trivial exercise also provides exciting insight into the effects of importance sampling on the convergence rate of estimators because of the introduction or removal of discontinuities. Specifically, we demonstrate that the convergence of multiple importance sampling (MIS) is determined by the strategy that converges slowest. We propose two simple and practical approaches to limit the impact of discontinuities on the convergence rate of estimators: The first one involves mirroring the integrand to cancel out the effect of boundary discontinuities. This is followed by two novel mirror sampling techniques for MC estimation in this mirrored domain. The second approach improves direct illumination light sampling by smoothing out discontinuities within the domain at the cost of introducing a small amount of bias. Our approaches are simple, practical and can be easily incorporated in production renderers

Clubbing masculinities: Gender shifts in gay men's dance floor choreographies

This is an Author's Accepted Manuscript of an article published in Journal of Homosexuality, 58(5), 608-625, 2011 [copyright Taylor & Francis], available online at: http://www.tandfonline.com/10.1080/00918369.2011.563660This article adopts an interdisciplinary approach to understanding the intersections of gender, sexuality, and dance. It examines the expressions of sexuality among gay males through culturally popular forms of club dancing. Drawing on political and musical history, I outline an account of how gay men's gendered choreographies changed throughout the 1970s, 80s, and 90s. Through a notion of “technologies of the body,” I situate these developments in relation to cultural levels of homophobia, exploring how masculine expressions are entangled with and regulated by musical structures. My driving hypothesis is that as perceptions of cultural homophobia decrease, popular choreographies of gay men's dance have become more feminine in expression. Exploring this idea in the context of the first decade of the new millennium, I present a case study of TigerHeat, one of the largest weekly gay dance club events in the United States