The state of the art in evaluating the performance of assistant and associate deans as seen by deans and assistant and associate deans.

This study explores the little-understood process of evaluating the performance of assistant and associate deans at dental colleges in the United States and Canada. Specifically, this research aimed to identify the methods, processes, and outcomes related to the performance appraisals of assistant/associate deans. Both deans and assistant/associate deans were surveyed. Forty-four of sixty-six deans (66.7 percent) and 227 of 315 assistant/associate deans (72.1 percent) completed surveys with both close-ended and open-ended questions. In addition, ten individuals from each group were interviewed. Results indicate that 75-89 percent of assistant/associate deans are formally evaluated, although as many as 27 percent may lack formal job descriptions. Some recommended best practices for performance appraisal are being used in a majority of colleges. Examples of these best practices are having at least yearly appraisals, holding face-to-face meetings, and setting specific, personal performance objectives/benchmarks for assistant/associate deans. Still, there is much room to improve appraisals by incorporating other recommended practices. Relatively high levels of overall satisfaction were reported by both assistant/associate deans and deans for the process and outcomes of appraisals. Assistant/associate deans rated the value of appraisals to overall development lower than did deans. Qualitative data revealed definite opinions about what constitutes effective and ineffective appraisals, including the use of goal-setting, timeliness, and necessary commitment. Several critical issues related to the results are discussed: differences in perspectives on performance reviews, the importance of informal feedback and job descriptions, the influence of an assistant/associate deans\u27 lack of tenure, and the length of service of deans. Lastly, recommendations for enhancing performance evaluations are offered

The state of the art in evaluating the performance of department chairs and division heads.

This study explores the little understood process of evaluating the performance of department chairs/division heads in dental schools. Specifically, this research aimed to elucidate the methods, processes, and outcomes related to the job performance of department chairs/division heads. Forty-three deans and 306 chairs completed surveys with both close-ended and open-ended questions. In addition, ten deans and ten chairs were interviewed. Results indicate that 80 to 90 percent of department chairs are formally evaluated, although as many as 50 percent may lack job descriptions. Recommended best practices for performance appraisal--such as having at least yearly appraisals, holding face-to-face meetings, and setting specific, personal performance objectives/benchmarks for chairs--are being used in most schools. Still, there is much room to improve appraisals by incorporating other recommended practices. Overall high levels of satisfaction were reported by both chairs and deans for the process and outcomes of appraisals. Qualitative data showed some convergence of opinions about appraisals with the notable exception of informal feedback. We explore some implications of these results, especially as they relate to improving performance appraisals

Strategic management and organizational behavior in dental education: reflections on key issues in an environment of change.

With issues such as shrinking revenue, access to care, faculty workloads, and graying faculty, dental schools are faced with difficult challenges that fall to dental school deans to manage. Do dental school deans have the organizational skill sets and ethical frameworks necessary to address the challenges now facing dental schools? The purpose of this article is to pose questions and suggestions regarding some of the key issues in dental colleges today and to stimulate discussion in the dental community about needed changes in dental education

PTPN22 gene polymorphism in Takayasu's arteritis

Objective. Takayasu's arteritis (TA) is a chronic, rare granulomatous panarteritis of unknown aetiology involving mainly the aorta and its major branches. In this study, genetic susceptibility to TA has been investigated by screening the functional single nucleotide polymorphism (SNP) of PTPN22 gene encoding the lymphoid-specific protein tyrosine phosphatase. Methods. Totally, 181 patients with TA and 177 healthy controls are genotyped by PCR-RFLP method for the SNP rs2476601 (A/G) of PTPN22 gene. Polymorphic region was amplified by PCR and digested with Xcm I enzyme. Results. Detected frequencies of heterozygous genotype (AG) were 5.1% (9/177) in control group and 3.8% (7/181) in TA group (P = 0.61, odds ratio: 0.75, 95% CI: 0.3, 2.0). No association with angiographic type, vascular involvement or prognosis of TA was observed either. Conclusion. The distribution of PTPN22 polymorphism did not reveal any association with TA in Turkey. © The Author 2008. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved

Anatomy of the anteromedial thigh flap based on the oblique branch of the descending branch of the lateral circumflex femoral artery

Anteromedial thigh (AMT) flaps based on lateral circumflex femoral artery (LCFA) have characteristics which make them favourable for use in reconstruction of extensive thigh, head, neck and leg defects. AMT flap which is elevated on the artery has the advantages of low donor site morbidity and preservation of main arteries. Due to inconstant anatomy of the pedicle, the flap is mostly not preferable. Hence, we aimed to describe the anatomical features of the unnamed branch of the descending branch of the LCFA harvesting AMT flap. For this purpose, the external iliac artery was displayed bilaterally on 15 adult (13 males and 2 females; age range 55–82 years) preserved cadavers using latex injection. The perforator branch of the descending branch from the LCFA was microdissected under 4× loupe magnification. The perforator branch was located 28.53 (20.20–34.20) cm distal to the anterior superior iliac spine, 22.12 (13.40–28.00) cm distal to the pubic tubercle, and 13.20 (10.80–16.20) cm proximal to the interepicondylar line. At the level of origin point the mean diameter of the perforating branch was 0.17 cm and the mean diameter of its cutaneous branch was 0.14 cm. The mean length of the pedicle was 5.71 (3.70–9.00) cm. We conclude that our findings contribute to the literature in terms of anatomical knowledge for surgical safety.

Assessment of the orbit morphometry on West Anatolian dry skulls

The orbit is very frequently damaged by traumas which result in not only bone deficits, but also functional deformities if reconstruction is not appropriate. Anatomical exposure of the bony orbit is of importance for both anatomists and surgeons who perform operation on this area. The current study evaluated the group of morphometrical parameters on 74 adult West Anatolian dry skulls and stereological surface area on the dry skull orbits while describing the clinical importance. Surface areas on the orbital base of the skulls were also evaluated using stereological method, bilaterally. Anthropological assessment of orbital base (in terms of width and height) revealed no significant difference between right and left sides. Both width and height of the optic foramen were significantly higher on the right side compared to left. The distances between the margins (medial, lateral, superior, inferior) of the orbital base and the optic foramen were longer on the right side compared to left, except the distances between the lateral margins. There was no significant difference among the subjects between right and left sides with respect to the orbital base in terms of stereological area calculation. The results are significant because there are no recorded anatomical data on West Anatolian skulls at previous researches. (Folia Morphol 2018; 77, 1: 105–109

A panel of oxidative stress assays does not provide supplementary diagnostic information in Behcet's disease patients

Published onlineJournal ArticleBACKGROUND: Recent findings suggest a role of oxidative stress in the pathogenesis of Behcet's disease (BD), but the utility of oxidative stress-associated assays in offering diagnostic information or in the monitoring of disease activity is largely unassessed. OBJECTIVE AND METHODS: We aimed to measure oxidative and inflammatory markers, along with the markers of reactive nitrogen species, S-nitrosothiols and 3-nitrotyrosine, in BD patients (n = 100) and healthy volunteers (n = 50). These markers were evaluated in regard to their role in the pathogenesis of BD as well as their relation to clinical presentation, disease activity and duration. RESULTS: Median values for erythrocyte sedimentation rate (ESR), C-reactive protein, leukocyte count, and IL-18 levels, as well as myeloperoxidase (MPO) activity, were statistically higher in the patient group compared to controls. Some inflammation markers (ESR, neutrophil and leukocyte counts) were statistically higher (p 0.05 in all statistical comparisons), nor was there any difference in median levels of these oxidative stress markers in active disease versus disease remission. S-nitrosothiols and 3-nitrotyrosine were undetectable in BD plasma. CONCLUSIONS: The application of oxidative stress-associated measures to BD blood samples offered no supplemental diagnostic or disease activity information to that provided by standard laboratory measures of inflammation. S-nitrosothiols and 3-nitrotyrosine appeared not to be markers for active BD; thus the search for biochemical markers that will indicate the active period should be continued with larger studies

Adherence of Candida Albicans to Different Finished Surfaces of PMMA Resins Reinforced with Glass E Fibers

Candida albicans has been widely associated with the etiology of denture-related stomatitis. When fiber reinforcement is used in the denture base as a total fiber reinforcement, the fibers may be exposed during the finishing of the denture. This may lead to oral disease if the fibers come into contact with the oral mucosa. In this study the adherence of candida albicans to the surface of PMMA and to the surface of E glass fibers of composite material used in dentures was compared. E glass fibers coated with Silan 1(silan + epoxy resin) and Silan 2 (silan + polyester resin) were used to reinforce denture base polymethyl metacrylate resin. Specimens were produced by two different methods. In the first group the fibers were wetted with a mixture of polymer powder and monomer liquid. In the second group the fibers were wetted in polymer liquid for 15 minutes and than blended with PMA polymers. All of the samples were heat cured. Half the prepared specimens were polished and the other half left unpolished. Replicates and yeast cells (Candida albicans ATCC, 90028, 1.0 x 107 cells/ml)were placed in wells and incubated for 1 h at 37°C on an orbital shaker at 80 rpm. The replicates were air dried and mounted on glass slides and stained with a solution of 0.5% crystal violet and 1.0% iodine. The number of adherant yeast cells were counted under a light microscope (400x). RESULTS: 1. Less Candida albicans adhered to the Polished surface (P< 0.01). 2. The highest Candida albicans accumulation was observed on the Silan 2(silan + poly ester resin) coupling samples.(P<0.001). The type of material used for silanization is an important factor, effecting the amount of Candida albicans accumulation