The Influence of the Matrix on the Apatite-Forming Ability of Calcium Containing Polydimethylsiloxane-Based Cements for Endodontics

This study aimed to characterize the chemical properties and bioactivity of an endodontic sealer (GuttaFlow Bioseal) based on polydimethylsiloxane (PDMS) and containing a calcium bioglass as a doping agent. Commercial PDMS-based cement free from calcium bioglass (GuttaFlow 2 and RoekoSeal) were characterized for comparison as well as GuttaFlow 2 doped with dicalcium phosphate dihydrate, hydroxyapatite, or a tricalcium silicate-based cement. IR and Raman analyses were performed on fresh materials as well as after aging tests in Hank's Balanced Salt Solution (28 d, 37 degrees C). Under these conditions, the strengthening of the 970 cm(-1) Raman band and the appearance of the IR components at 1455-1414, 1015, 868, and 600-559 cm(-1) revealed the deposition of B-type carbonated apatite. The Raman I-970/I-638 and IR A(1010)/A(1258) ratios (markers of apatite-forming ability) showed that bioactivity decreased along with the series: GuttaFlow Bioseal > GuttaFlow 2 > RoekoSeal. The PDMS matrix played a relevant role in bioactivity; in GuttaFlow 2, the crosslinking degree was favorable for Ca2+ adsorption/complexation and the formation of a thin calcium phosphate layer. In the less crosslinked RoekoSeal, such processes did not occur. The doped cements showed bioactivity higher than GuttaFlow 2, suggesting that the particles of the mineralizing agents are spontaneously exposed on the cement surface, although the hydrophobicity of the PDMS matrix slowed down apatite deposition. Relevant properties in the endodontic practice (i.e., setting time, radiopacity, apatite-forming ability) were related to material composition and the crosslinking degree

The Use of Premixed Calcium Silicate Bioceramic Sealer with Warm Carrier-Based Technique: A 2-Year Study for Patients Treated in a Master Program

Background: Recently several calcium silicate flowable sealers have been introduced as endodontic materials for the root canal. This clinical study tested the use of a new premixed calcium silicate bioceramic sealer in association with the Thermafil warm carrier-based technique (TF). Epoxy-resin-based sealer with the warm carrier-based technique was the control group. Methodology: Healthy consecutive patients (n = 85) requiring 94 root canal treatments were enrolled in this study and assigned to one filling group (Ceraseal-TF n = 47, AH Plus-TF n = 47) in accordance with operator training and best clinical practice. Periapical X-rays were taken preoperatively, after root canal filling and after 6, 12 and 24 months. Two evaluators blindly assessed the periapical index (PAI) and sealer extrusion in the groups (k = 0.90). Healing rate and survival rate were also evaluated. Chi-square tests was used to analyze significant differences between the groups. Multilevel analysis was performed to evaluate the factors associated with healing status. Results: A total of 89 root canal treatments in 82 patients were analyzed at the end-line (24 months). The total drop-out was 3.6% (3 patients; 5 teeth). A total of 91.1% of healed teeth (PAI 1-2) was observed in Ceraseal-TF, with 88.6% in AH Plus-TF. No significant difference was observed on healing outcome and survival among the two filling groups (p > 0.05). Apical extrusion of the sealers occurred in 17 cases (19.0%). Of these, 6 occurred in Ceraseal-TF (13.3%) and 11 in AH Plus-TF (25.0%). Three Ceraseal extrusions were radiographically undetectable after 24 months. All the AH Plus extrusions did not change during the evaluation time. Conclusions: The combined use of the carrier-based technique and premixed CaSi-based bioceramic sealer showed clinical results comparable with carrier-based technique and epoxy-resin-based sealer. The radiographical disappearance of apically extruded Ceraseal is a possible event in the first 24 months

COVID-19 Vaccine Hesitancy in Italy: Predictors of Acceptance, Fence Sitting and Refusal of the COVID-19 Vaccination

Background: The hesitancy in taking the COVID-19 vaccine is a global challenge. The need to identify predictors of COVID-19 vaccine reluctance is critical. Our objectives were to evaluate sociodemographic, psychological, and behavioral factors, as well as attitudes and beliefs that influence COVID-19 vaccination hesitancy in the general population of Italy. Methods: A total of 2,015 people were assessed in two waves (March, April and May, 2021). Participants were divided into three groups: (1) individuals who accepted the vaccination (“accepters”); (2) individuals who refused the vaccination (“rejecters”); and (3) individuals who were uncertain about their attitudes toward the vaccination (“fence sitters”). Group comparisons were performed using ANOVA, the Kruskal-Wallis test and chi-square tests. The strength of the association between the groups and the participants' characteristics was analyzed using a series of multinomial logistic regression models with bootstrap internal validation (one for each factor). Results: The “fence sitters” group, when compared to the others, included individuals of younger age, lower educational level, and worsening economic situation in the previous 3 months. After controlling for sociodemographic factors, the following features emerged as the main risk factors for being “fence sitters” (compared with vaccine “accepters”): reporting lower levels of protective behaviors, trust in institutions and informational sources, frequency of use of informational sources, agreement with restrictions and higher conspirative mentality. Higher levels of COVID-19 perceived risk, trust in institutions and informational sources, frequency of use of informational sources, agreement with restrictions and protective behaviors were associated with a higher likelihood of becoming “fence sitters” rather than vaccine “rejecters.” Conclusions: The “fence sitters” profile revealed by this study is intriguing and should be the focus of public programmes aimed at improving adherence to the COVID-19 vaccination campaign

Mineral-doped poly(L-lactide) acid scaffolds enriched with exosomes improve osteogenic commitment of human adipose-derived mesenchymal stem cells

Exosomes derived from mesenchymal stem cells are extracellular vesicles released to facilitate cell communication and function. Recently, polylactic acid (PLA), calcium silicates (CaSi), and dicalcium phosphate dihydrate (DCPD) have been used to produce bioresorbable functional mineral-doped porous scaffolds-through thermally induced phase separation technique, as materials for bone regeneration. The aim of this study was to investigate the effect of mineral-doped PLA-based porous scaffolds enriched with exosome vesicles (EVs) on osteogenic commitment of human adipose mesenchymal stem cells (hAD-MSCs). Two different mineral-doped scaffolds were produced: PLA-10CaSi-10DCPD and PLA-5CaSi-5DCPD. Scaffolds surface micromorphology was investigated by ESEM-EDX before and after 28 days immersion in simulated body fluid (HBSS). Exosomes were deposited on the surface of the scaffolds and the effect of exosome-enriched scaffolds on osteogenic commitment of hAD-MSCs cultured in proximity of the scaffolds has been evaluated by real time PCR. In addition, the biocompatibility was evaluated by direct-contact seeding hAD-MSCs on scaffolds surface-using MTT viability test. In both formulations, ESEM showed pores similar in shape (circular and elliptic) and size (from 10\u201330 \ub5m diameter). The porosity of the scaffolds decreased after 28 days immersion in simulated body fluid. Mineral-doped scaffolds showed a dynamic surface and created a suitable bone-forming microenvironment. The presence of the mineral fillers increased the osteogenic commitment of hAD-MSCs. Exosomes were easily entrapped on the surface of the scaffolds and their presence improved gene expression of major markers of osteogenesis such as collagen type I, osteopontin, osteonectin, osteocalcin. The experimental scaffolds enriched with exosomes, in particular PLA-10CaSi-10DCPD, increased the osteogenic commitment of MSCs. In conclusion, the enrichment of bioresorbable functional scaffolds with exosomes is confirmed as a potential strategy to improve bone regeneration procedures

PLA-based mineral-doped scaffolds seeded with human periapical cyst-derived MSCs: A promising tool for regenerative healing in dentistry

Human periapical cyst mesenchymal stem cells (hPCy-MSCs) are a newly discovered cell population innovatively collected from inflammatory periapical cysts. The use of this biological waste guarantees a source of stem cells without any impact on the surrounding healthy tissues, presenting a valuable potential in tissue engineering and regenerative medicine applications. In the present study, hPCy-MSCs were collected, isolated, and seeded on three experimental mineral-doped porous scaffolds produced by the thermally-induced phase-separation (TIPS) technique. Mineral-doped scaffolds, composed of polylactic acid (PLA), dicalcium phosphate dihydrate (DCPD), and/or hydraulic calcium silicate (CaSi), were produced by TIPS (PLA-10CaSi, PLA-5CaSi-5DCPD, PLA-10CaSi-10DCPD). Micro-CT analysis evaluated scaffolds micromorphology. Collected hPCy-MSCs, characterized by cytofluorimetry, were seeded on the scaffolds and tested for cell proliferation, cells viability, and gene expression for osteogenic and odontogenic differentiation (DMP-1, OSC, RUNX-2, HPRT). Micro-CT revealed an interconnected highly porous structure for all the scaffolds, similar total porosity with 99% open pores. Pore wall thickness increased with the percentage of CaSi and DCPD. Cells seeded on mineral-doped scaffolds showed a superior proliferation compared to pure PLA scaffolds (control), particularly on PLA-10CaSi-10DCPD at day 12. A higher number of non-viable (red stained) cells was observable on PLA scaffolds at days 14 and 21. DMP-1 expression increased in hPCy-MSCs cultured on all mineral-doped scaffolds, in particular on PLA-5CaSi-5DCPD and PLA-10CaSi-10DCPD. In conclusion, the innovative combination of experimental scaffolds colonized with autologous stem cells from periapical cyst represent a promising strategy for regenerative healing of periapical and alveolar bone

Assessment of DXA derived bone quality indexes and bone geometry parameters in early breast cancer patients: A single center cross-sectional study

Background: Bone mineral density (BMD) lacks sensitivity in individual fracture risk assessment in early breast cancer (EBC) patients treated with aromatase inhibitors (AIs). New dual-energy X-ray absorptiometry (DXA) based risk factors are needed. Methods: Trabecular bone score (TBS), bone strain index (BSI) and DXA parameters of bone geometry were evaluated in postmenopausal women diagnosed with EBC. The aim was to explore their association with morphometric vertebral fractures (VFs). Subjects were categorized in 3 groups in order to evaluate the impact of AIs and denosumab on bone geometry: AI-naive, AI-treated minus (AIDen-) or plus (AIDen+) denosumab. Results: A total of 610 EBC patients entered the study: 305 were AI-naive, 187 AIDen-, and 118 AIDen+. In the AI-naive group, the presence of VFs was associated with lower total hip BMD and T-score and higher femoral BSI. As regards as bone geometry parameters, AI-naive fractured patients reported a significant increase in femoral narrow neck (NN) endocortical width, femoral NN subperiosteal width, intertrochanteric buckling ratio (BR), intertrochanteric endocortical width, femoral shaft (FS) BR and endocortical width, as compared to non-fractured patients. Intertrochanteric BR and intertrochanteric cortical thickness significantly increased in the presence of VFs in AIDen- patients, not in AIDen+ ones. An increase in cross-sectional area and cross-sectional moment of inertia, both intertrochanteric and at FS, significantly correlated with VFs only in AIDen+. No association with VFs was found for either lumbar BSI or TBS in all groups. Conclusions: Bone geometry parameters are variably associated with VFs in EBC patients, either AI-naive or AI treated in combination with denosumab. These data suggest a tailored choice of fracture risk parameters in the 3 subgroups of EBC patients

COVID‑19 in pregnant women in South Africa: A retrospective review

Background. The majority of maternal deaths in South Africa (SA) occur as a result of non-pregnancy-related infections (NPRI). Pregnancy is a known risk factor in severe COVID‑19, increasing the burden of NPRI in SA. In this study, we describe the prevalence, profile and clinical outcomes of pregnant women with COVID‑19 admitted to a tertiary facility. Objectives. To describe the prevalence, profile and clinical outcomes of pregnant women with COVID‑19 admitted to a tertiary facility in Gauteng, SA. Methods. We performed a retrospective review of all pregnant women with COVID‑19 admitted to Charlotte Maxeke Johannesburg Academic Hospital between 6 March and 30 August 2020. Data collected included demographics, medical history, obstetric history, clinical findings and laboratory variables. Outcomes assessed were mortality, admission to intensive care unit (ICU), symptomatic v. asymptomatic disease, maternal and fetal outcome and mode of delivery. Results. A total of 204 pregnant women were included in the study. Of these, 33 (16.2%) women were critically ill, with 21 (10.3%) admitted to the ICU and 3 (1.5%) deaths related to COVID‑19. The median gestational age was 37 weeks and median birthweight 2 940 g. Sixty-seven women (33%) were HIV-positive, in keeping with national statistics regarding HIV in pregnancy. Caesarean section was the most common mode of delivery (n=105, 60%). However, no women underwent caesarean section for indications related to COVID‑19. Conclusion. COVID‑19-related mortality in our cohort was higher than that seen internationally, likely due to differences in background maternal mortality rates and difficulty in accessing care

Proof-of-concept of a data-driven approach to estimate the associations of comorbid mental and physical disorders with global health-related disability

Objective: The standard method of generating disorder-specific disability scores has lay raters make rankings between pairs of disorders based on brief disorder vignettes. This method introduces bias due to differential rater knowledge of disorders and inability to disentangle the disability due to disorders from the disability due to comorbidities. Methods: We propose an alternative, data-driven, method of generating disorder-specific disability scores that assesses disorders in a sample of individuals either from population medical registry data or population survey self-reports and uses Generalized Random Forests(GRF) to predict global (rather than disorder-specific) disability assessed by clinician ratings or by survey respondent self-reports. This method also provides a principled basis for studying patterns and predictors of heterogeneity in disorder-specific disability. We illustrate this method by analyzing data for 16 disorders assessed in the World Mental Health Surveys(n=53,645).Results: Adjustments for comorbidity decreased estimates of disorder-specific disability substantially. Estimates were generally somewhat higher with GRF than conventional multivariable regression models. Heterogeneity was nonsignificant. Conclusions: The results show clearly that the proposed approach is practical, and that adjustment is needed for comorbidities to obtain accurate estimates of disorder-specific disability. Expansion to a wider range of disorders would likely find more evidence for heterogeneity

Functional Heterogeneity of Embryonic Stem Cells Revealed through Translational Amplification of an Early Endodermal Transcript

Detection of low-level, lineage-specific transcription aids in the identification of lineage-primed populations of ES cells provides a new framework for pluripotency

Rates and Predictors of Treatment Failure in Staphylococcus aureus Prosthetic Joint Infections According to Different Management Strategies: A Multinational Cohort Study—The ARTHR-IS Study Group

Introduction: Guidelines have improved the management of prosthetic joint infections (PJI). However, it is necessary to reassess the incidence and risk factors for treatment failure (TF) of Staphylococcus aureus PJI (SA-PJI) including functional loss, which has so far been neglected as an outcome. Methods: A retrospective cohort study of SA-PJI was performed in 19 European hospitals between 2014 and 2016. The outcome variable was TF, including related mortality, clinical failure and functional loss both after the initial surgical procedure and after all procedures at 18 months. Predictors of TF were identified by logistic regression. Landmark analysis was used to avoid immortal time bias with rifampicin when debridement, antibiotics and implant retention (DAIR) was performed. Results: One hundred twenty cases of SA-PJI were included. TF rates after the first and all surgical procedures performed were 32.8% and 24.2%, respectively. After all procedures, functional loss was 6.0% for DAIR and 17.2% for prosthesis removal. Variables independently associated with TF for the first procedure were Charlson >= 2, haemoglobin 30 kg/m(2) and delay of DAIR, while rifampicin use was protective. For all procedures, the variables associated with TF were haemoglobin < 10 g/dL, hip fracture and additional joint surgery not related to persistent infection. Conclusions: TF remains common in SA-PJI. Functional loss accounted for a substantial proportion of treatment failures, particularly after prosthesis removal. Use of rifampicin after DAIR was associated with a protective effect. Among the risk factors identified, anaemia and obesity have not frequently been reported in previous studies. [GRAPHICS]