Serum thyroid hormone evaluation during transition periods in dairy cows

Abstract. Thirty-five multiparous Holstein dairy cows were selected from a high-producing dairy farm in northeastern Italy: 16 in second lactation (L2), 10 in third lactation (L3) and 9 in fourth lactation (L4). Blood sampling was carried out 7 ± 5 days before calving (Pre/C) and 7 ± 5 days after calving (Post/C). Serum triiodothyronine (T3), thyroxine (T4) and a thyroid-stimulating hormone (TSH) were assessed. Two-way analysis of variance (ANOVA) showed statistically significant effects of class (L2, L3, L4) and of period (Pre/C, Post/C) on the parameters studied (T3, T4, TSH). In particular, Bonferroni's multiple comparison test showed lower values in post-calving than in the pre-calving in L2 and L3 for TSH; lower values in post-calving than in the pre-calving in L2 for T3; and lower values in post-calving than in the pre-calving in L2, L3 and L4 for T4. Our results improve the knowledge of endocrine and metabolic changes occurring in dairy cows during transition periods and may be useful to supply a new strategy for the improvement of dairy cow farm management and reproductive performance

Behavioural and biochemical stress responses of Palinurus elephas after exposure to boat noise pollution in tank

This study examined the effects of boat noise on the behavioural and biochemical parameters of the Mediterranean spiny lobster (Palinurus elephas).The experiment was conducted in a tank equipped with a video and audio recording system. 18 experimental trials, assigned to boat noise and control conditions, were performed using lobsters in single and group of 4 specimens. After a 1. h habituation period, we audio- and video-recorded the lobsters for 1. h. During the experimental phase, the animals assigned to the boat groups were exposed to boat noise pollution (a random sequence of boat noises). Exposure to the noise produced significant variations in locomotor behaviours and haemolymphatic parameters. Our results indicate that the lobsters exposed to boat noises increased significantly their locomotor activities and haemolymphatic bioindicator of stressful conditions such as glucose, total proteins, Hsp70 expression and THC when tested both singly and in groups. © 2014 Elsevier Ltd

In Vitro Cytotoxic Effect of Aqueous Extracts from Leaves and Rhizomes of the Seagrass Posidonia oceanica (L.) Delile on HepG2 Liver Cancer Cells: Focus on Autophagy and Apoptosis

Aqueous extracts from Posidonia oceanica’s green and brown (beached) leaves and rhizomes were prepared, submitted to phenolic compound and proteomic analysis, and examined for their potential cytotoxic effect on HepG2 liver cancer cells in culture. The chosen endpoints related to survival and death were cell viability and locomotory behavior, cell-cycle analysis, apoptosis and autophagy, mitochondrial membrane polarization, and cell redox state. Here, we show that 24 h exposure to both green-leaf- and rhizome-derived extracts decreased tumor cell number in a dose– response manner, with a mean half maximal inhibitory concentration (IC50) estimated at 83 and 11.5 µg of dry extract/mL, respectively. Exposure to the IC50 of the extracts appeared to inhibit cell motility and long-term cell replicating capacity, with a more pronounced effect exerted by the rhizomederived preparation. The underlying death-promoting mechanisms identified involved the downregulation of autophagy, the onset of apoptosis, the decrease in the generation of reactive oxygen species, and the dissipation of mitochondrial transmembrane potential, although, at the molecular level, the two extracts appeared to elicit partially differentiating effects, conceivably due to their diverse composition. In conclusion, P. oceanica extracts merit further investigation to develop novel promising prevention and/or treatment agents, as well as beneficial supplements for the formulation of functional foods and food-packaging material with antioxidant and anticancer propertie

Use of a comprehensive diagnostic algorithm for Anisakis allergy in a high seroprevalence Mediterranean setting

Background. Diagnosis of anisakis allergy (AA) is based on the skin prick test (SPT) and specific IgE (sIgE) determination. Anyway, false positivity cases are due to cross reactivity with numerous allergens. The aim of the study was to evaluate the reliability of a comprehensive diagnostic algorithm for the AA. Methods. An observational study was conducted on a sample of consecutive subjects accessing the allergology outpatient ambulatories of two hospitals located in Western Sicily. All the recruited outpatients were tested by Skin Prick Test performed using anisakis extracts by ALK-Abello (Madrid, Spain). Specific IgE dosage for anisakis extracts was then performed by using ImmunoCAP250 (Immunodiagnostics Uppsala, Sweden). Consequently, outpatients who tested positive to first line tests underwent sIgE testing for ascaris and tropomyosin. Lastly, outpatients positive to the first line were invited to be further tested by basophil activation test (BAT) by using Flow CAST kit and anisakis commercial extract (Buhlmann Laboratories AG, Schonenbuch, Switzerland), as confirmatory analysis. Results. One hundred and eleven outpatients with an anamnesis suggestive of sensitization to anisakis (AS) and 466 subjects with chronic urticaria (CU) were recruited in the study. Of these, 22 with AS and 41 with CU showed a sensitization to anisakis allergens. The diagnostic algorithm revealed that 8.8% of outpatients who tested positive to sIgE determination were affected by CU, while 82.5% of all the sIgE positivity was related to cross-reactivity. Overall, a genuine anisakis seroprevalence of 2.3% was documented. Within a sub-sample of 15 subjects with clinical symptoms related to AA, n. 8 showed a real positivity after BAT. A greater response to A. pegreffii allergens as compared to A. simplex was reported. Conclusions. Our preliminary findings support the high clinical specificity of BAT for AA diagnosis, suggesting implementing this method in a comprehensive diagnostic algorithm

Back to Uluzzo – archaeological, palaeoenvironmental and chronological context of the Mid–Upper Palaeolithic sequence at Uluzzo C Rock Shelter (Apulia, southern Italy)

The tempo and mode of Homo sapiens dispersal in Eurasia and the demise of Neanderthals has sparked debate about the dynamics of Neanderthal extinction and its relationship to the arrival of H. sapiens. In Italy, the so-called ‘Transition’ from Neanderthals to H. sapiens is related to the Uluzzian technocomplex, i.e. the first archaeological evidence for modern human dispersal on the European continent. This paper illustrates the new chronology and stratigraphy of Uluzzo C, a rock shelter and Uluzzian key site located in the Uluzzo Bay in southern Italy, where excavations are ongoing, refining the cultural sequence known from previous excavations. Microstratigraphic investigation suggests that most of the deposit formed after dismantling of the vault of the rock shelter and due to wind input of loess deflated by the continental shelf. The occasional reactivation of the hydrology of the local karst system under more humid conditions further contributed to the formation of specific layers accumulating former Terra Rossa-type soil fragments. Superposed on sedimentary processes, strong bioturbation and the mobilization and recrystallization of calcite have been detected. Optically stimulated luminescence (OSL) ages from Uluzzo C Rock Shelter are congruent with previously published radiocarbon ages obtained on shell beads and tephrachronology from adjacent sites preserving the Uluzzian technocomplex such as Grotta del Cavallo, confirming the onset for the Uluzzian in the area to ca. 39.2–42.0 ka. The OSL chronology from Uluzzo C also provides a terminus post quem for the end of the Mousterian in the region, constraining the disappearance of the Neanderthals in that part of Italy to ≥46 ± 4 ka

New insights on Celtic migration in Hungary and Italy through the analysis of non-metric dental traits

The Iron Age is characterized by an extended interweaving of movements by Celts in Europe. Several waves of Celts from Western and Central Europe migrated southeast and west from the core area of the La Téne culture (between Bourgogne and Bohemia). Through the analysis of non-metric dental traits, this work aims to understand the biological relationship among Celtic groups arrived in Italy and the Carpathian Basin, as well as between local populations and Celtic newcomers. A total of 10 non-metric dental traits were analyzed to evaluate biological affinities among Celts (Sopron-Krautacker and Pilismarót-Basaharc) and Scythians-related populations from Hungary (Tápiószele), Celts from continental Europe (Switzerland and Austria), two Iron Age Etruscan-Celtic sites from northern Italy (Monterenzio Vecchio and Monte Bibele), 13 Iron Age central-southern Italic necropolises, and the northern Italian Bronze Age necropolis of Scalvinetto. Strontium isotopes were measured on individuals from the necropolis of Monte Bibele to infer their local or non-local origin. Results highlight the existence of statistically significant differences between Celts and autochthonous Italian groups. Celtic groups from Hungary and Italy (i.e., non-local individuals of Monterenzio Vecchio and Monte Bibele) share a similar biological background, supporting the historical records mentioning a common origin for Celts migrated to the eastern and southern borders of today’s Europe. The presence of a supposed Steppean ancestry both in Celts from Hungary and Celts from northern Italy corroborates the hypothesis of the existence of a westward migration of individuals and genes from the Steppe towards northern Italy during the Bronze and Iron Age, which contributed to the biological variability of pre-Celtic and later Celtic populations, respectively. Conversely, individuals from central-southern Italy show an autochthonous pre-Iron Age background. Lastly, this work supports the existence of Celtic migratory routes in northern Italy, as shown by biological and cultural admixture between Celts and Italics living together

High-accuracy methodology for the integrative restoration of archaeological teeth by using reverse engineering techniques and rapid prototyping

The reconstruction of the original morphology of bones and teeth after sampling for physicochemical (e.g., radiocarbon and uranium series dating, stable isotope analysis, paleohistology, trace element analysis) and biomolecular analyses (e.g., ancient DNA, paleoproteomics) is appropriate in many contexts and compulsory when dealing with fossil human remains. The reconstruction protocols available to date are mostly based on manual re-integration of removed portions and can lead to an imprecise recovery of the original morphology. In this work, to restore the original external morphology of sampled teeth we used computed microtomography (microCT), reverse engineering (RE), computer-aided design (CAD) and rapid prototyping (RP) techniques to fabricate customized missing parts. The protocol was tested by performing the reconstruction of two Upper Palaeolithic human teeth from the archaeological excavations of Roccia San Sebastiano (Mondragone, Caserta, southern Italy) and Riparo I of Grotte Verdi di Pradis (Clauzetto, Pordenone, north-eastern Italy) (RSS2 and Pradis 1, respectively), which were sampled for physicochemical and biomolecular analyses. It involved a composite procedure consisting in: a) the microCT scanning of the original specimens; b) sampling; c) the microCT scanning of the specimens after sampling; d) the reconstruction of the digital 3D surfaces of the specimens before and after sampling; e) the creation of digital models of the missing/sampled portions by subtracting the 3D images of the preserved portions (after the sampling) from the images of the intact specimens (before the sampling) by using reverse engineering techniques; f) the prototyping of the missing/sampled portions to be integrated; g) the painting and application of the prototypes through the use of compatible and reversible adhesives. By following the proposed protocol, in addition to the fabrication of a physical element which is faithful to the original, it was possible to obtain a remarkable correspondence between the contact surfaces of the two portions (the original and the reconstructed one) without having to resort to any manipulation/adaptation of either element