122 research outputs found
Experimental assessment of drag reduction by traveling waves in a turbulent pipe flow
We experimentally assess the capabilities of an active, open-loop technique
for drag reduction in turbulent wall flows recently introduced by Quadrio et
al. [J. Fluid Mech., v.627, 161, (2009)]. The technique consists in generating
streamwise-modulated waves of spanwise velocity at the wall, that travel in the
streamwise direction.
A proof-of-principle experiment has been devised to measure the reduction of
turbulent friction in a pipe flow, in which the wall is subdivided into thin
slabs that rotate independently in the azimuthal direction. Different speeds of
nearby slabs provide, although in a discrete setting, the desired streamwise
variation of transverse velocity.
Our experiment confirms the available DNS results, and in particular
demonstrates the possibility of achieving large reductions of friction in the
turbulent regime. Reductions up to 33% are obtained for slowly
forward-traveling waves; backward-traveling waves invariably yield drag
reduction, whereas a substantial drop of drag reduction occurs for waves
traveling forward with a phase speed comparable to the convection speed of
near-wall turbulent structures.
A Fourier analysis is employed to show that the first harmonics introduced by
the discrete spatial waveform that approximates the sinusoidal wave are
responsible for significant effects that are indeed observed in the
experimental measurements. Practical issues related to the physical
implementation of this control scheme and its energetic efficiency are briefly
discussed.Comment: Article accepted by Phys. Fluids. After it is published, it will be
found at http://pof.aip.or
Solar tower CSP plants with transcritical cycles based on CO2 mixtures: A sensitivity on storage and power block layouts
In this work three CO2-based binary mixtures, CO2 + C6F6, CO2 + C2H3N and CO2 + C4F8, are compared as innovative working fluids for closed power cycles in CSP plants. Adopted in transcritical cycles, they lead to cycle efficiencies higher than sCO2 cycles at minimum temperatures above 50 degrees C, a typical condition for arid regions with high solar radiation. The analysis considers four plant configurations: the first with direct storage, solar salts as HTF and cycle maximum temperatures of 550 degrees C, while the three other plants adopt sodium as HTF and an indirect storage system, designed for cycle maximum temperatures of 550 degrees C, 625 degrees C and 700 degrees C. Detailed models are used to characterize the solar fields optical performance, the receiver thermal efficiency and the HTF pump consumption, both at design and off-design conditions, for large scale plants located in Las Vegas. Different power block layouts are considered, spanning from the more efficient ones to cycles with a high heat recovery capacity. In addition, the impact of the mixtures on the design of heat exchangers is evidenced, with convincing results with respect to the heat transfer characteristics of CO2. Considering the resulting yearly performances and LCOE of each configuration, the adoption of indirect storage systems is considered a viable solution for high temperature solar plants. The three innovative mixtures allow for a reduction in LCOE with respect to sCO2 cycles (up to 10 $/MWh, depending on the configuration), capacity factors above 70% for the specific location, optimal solar multiples around 2.8 and 12 equivalent hours of TES
Wearable sensor networks: A measurement study
Abstract Wearable technology is no longer science fiction. Thanks to the growing capability in the production chain to miniaturize complex electronics, a wide variety of gadgets that can be worn or included in dresses and accessories have emerged. These smart gadgets can collect data about the physical condition of the user and/or the environment providing the basis for innovative and valuable services. The main goal of this paper is to assess this context through field experiments undertaken in a testbed comprised of sensing hardware deployed on open source boards such as Arduino. Moreover, coupled with the sensing tier, we propose a proof-of-concept deployment architecture enabling a wide range of wearable sensors to collect and transmit data to a logically centralized unit
On-Off Pumping for Drag Reduction in a Turbulent Channel Flow
We show that the energy required by a turbulent flow to displace a given amount of fluid through a straight duct in a given time interval can be reduced by modulating in time the pumping power. The control strategy is hybrid: it is passive, as it requires neither a control system nor control energy, but it manipulates how pumping energy is delivered to the system (as in active techniques) to increase the pumping efficiency. Our control employs a temporally periodic pumping pattern, where a short and intense acceleration (in which the pumping system is on) followed by a longer deceleration (in which the pumping system is off) makes the flow alternately visit a quasi-laminar and a turbulent state. The computational study is for a plane channel flow, and employs direct numerical simulations, which present specific computational challenges, for example the highly varying instantaneous value of the Reynolds number, and the importance of discretisation effects. Particular care is devoted to a meaningful definition of drag reduction in the present context. The ability of the forcing to yield significant savings is demonstrated. Since only a small portion of the parameter space is investigated, the best performance of the control technique remains to be assessed
RANS and LES Simulations of the Airflow Through Nasal Cavities
The prediction of detailed flow patterns in nasal cavities using computational fluid dynamics (CFD) can provide essential information on the potential relationship between patient-specific geometrical characteristics and health problems. The long-term goal of the OpenNOSE project is to develop a reliable open-source computational tool based on the OpenFOAM CFD toolbox that can assist surgeons in their daily practice. The objective of this study was to investigate the effect of the turbulence model and boundary conditions on simulations of the airflow in nasal cavities. The geometry, including paranasal sinuses, was reconstructed from a carefully selected CT scan, and RANS and LES simulations were carried out for steady inspiration and expiration. At a flow rate near 20 l/min, the flow is laminar in most of the domain. During the inspiration phase, turbulence develops in nasopharynx and oropharynx regions; during the expiration phase, another vortical region is observed down the nostrils. A comparison between different boundary conditions suggests the use of a total pressure condition, or alternatively a uniform velocity, at the inlet and outlet. In future work the same geometry will be used for setting up a laboratory experiment, intended to cross-validate the numerical results
Design and Experimental Characterization of a Niti-Based, High-Frequency, Centripetal Peristaltic Actuator
Development and experimental testing of a peristaltic device actuated by a single shape-memory NiTi wire are described. The actuator is designed to radially shrink a compliant silicone pipe, and must work on a sustained basis at an actuation frequency that is higher than those typical of NiTi actuators. Four rigid, aluminum-made circular sectors are sitting along the pipe circumference and provide the required NiTi wire housing. The aluminum assembly acts as geometrical amplifier of the wire contraction and as heat sink required to dissipate the thermal energy of the wire during the cooling phase. We present and discuss the full experimental investigation of the actuator performance, measured in terms of its ability to reduce the pipe diameter, at a sustained frequency of 1.5 Hz. Moreover, we investigate how the diameter contraction is affected by various design parameters as well as actuation frequencies up to 4 Hz. We manage to make the NiTi wire work at 3% in strain, cyclically providing the designed pipe wall displacement. The actuator performance is found to decay approximately linearly with actuation frequencies up to 4 Hz. Also, the interface between the wire and the aluminum parts is found to be essential in defining the functional performance of the actuator
Travelling waves in pipe flow
A family of three-dimensional travelling waves for flow through a pipe of
circular cross section is identified. The travelling waves are dominated by
pairs of downstream vortices and streaks. They originate in saddle-node
bifurcations at Reynolds numbers as low as 1250. All states are immediately
unstable. Their dynamical significance is that they provide a skeleton for the
formation of a chaotic saddle that can explain the intermittent transition to
turbulence and the sensitive dependence on initial conditions in this shear
flow.Comment: 4 pages, 5 figure
- …