Earthquake Resistance of a Rockfill Dam

The paper describes the investigation of the seismic safety of a 131 m high rock fill dam presently under construction across the Rio Chixoy in Guatemala. The dam is located in a region of high seismicity the recently active Motagua fault being only 40 km distant. Due to the possibility of high peak ground accelerations it was considered necessary to conduct a full dynamic analysis, which was carried out in stages following the Seed-Lee-Idriss method, the latter being modified where it was deemed necessary

Explicit solution for vibrating bar with viscous boundaries and internal damper

We investigate longitudinal vibrations of a bar subjected to viscous boundary conditions at each end, and an internal damper at an arbitrary point along the bar's length. The system is described by four independent parameters and exhibits a variety of behaviors including rigid motion, super stability/instability and zero damping. The solution is obtained by applying the Laplace transform to the equation of motion and computing the Green's function of the transformed problem. This leads to an unconventional eigenvalue-like problem with the spectral variable in the boundary conditions. The eigenmodes of the problem are necessarily complex-valued and are not orthogonal in the usual inner product. Nonetheless, in generic cases we obtain an explicit eigenmode expansion for the response of the bar to initial conditions and external force. For some special values of parameters the system of eigenmodes may become incomplete, or no non-trivial eigenmodes may exist at all. We thoroughly analyze physical and mathematical reasons for this behavior and explicitly identify the corresponding parameter values. In particular, when no eigenmodes exist, we obtain closed form solutions. Theoretical analysis is complemented by numerical simulations, and analytic solutions are compared to computations using finite elements.Comment: 29 pages, 6 figure

Study of UV Degradation on Plastic (PET) Aerosols

The present study was aimed to explore the impact of UV radiation, from ‘real world’ environmental exposure, on the degradation of plastic PET aerosol containers. Additionally, the intent was to correlate the ‘real world’ environmental exposure to artificial sunlight, using a Xenon-Arc lamp, to develop a simulated test. The standardized methodology could then be used to evaluate the integrity of the plastic aerosol container and product, without the complexity of using ‘real world’ exposure. Through this study, a lab method was developed and validated that would simulate the effect of UV radiation using the Xenon-Arc. Moreover, a correlation was made for conditions inside the Xenon-Arc chamber that were conducive to testing a plastic pressurized container

Deletion of Neurturin Impairs Development of Cholinergic Nerves and Heart Rate Control in Postnatal Mouse Hearts

The neurotrophic factor neurturin is required for normal cholinergic innervation of adult mouse heart and bradycardic responses to vagal stimulation. Our goals were to determine effects of neurturin deletion on development of cardiac chronotropic and dromotropic functions, vagal baroreflex response, and cholinergic nerve density in nodal regions of postnatal mice. Experiments were performed on postnatal C57BL/6 wild-type (WT) and neurturin knockout (KO) mice. Serial electrocardiograms were recorded noninvasively from conscious pups using an ECGenie apparatus. Mice were treated with atenolol to evaluate and block sympathetic effects on heart rate (HR) and phenylephrine (PE) to stimulate the baroreflex. Immunohistochemistry was used to label cholinergic nerves in paraffin sections. WT and KO mice showed similar age-dependent increases in HR and decreases in PR interval between postnatal days (P) 2.5 and 21. Treatment with atenolol reduced HR significantly in WT and KO pups at P7.5. PE caused a reflex bradycardia that was significantly smaller in KO pups. Cholinergic nerve density was significantly less in nodal regions of P7.5 KO mice. We conclude that cholinergic nerves have minimal influence on developmental changes in HR and PR, QRS, and QTc intervals in mouse pups. However, cholinergic nerves mediate reflex bradycardia by 1 week postnatally. Deletion of neurturin impairs cholinergic innervation of the heart and the vagal efferent component of the baroreflex early during postnatal development

The Energetics of Li Off-Centering in K1−x_{1-x}Lix_xTaO3_3; First Principles Calculations

K$_{1-x}$Li$_{x}$TaO$_3$ (KLT) solid solutions exhibit a variety of interesting physical phenomena related to large displacements of Li-ions from ideal perovskite A-site positions. First-principles calculations for KLT supercells were used to investigate these phenomena. Lattice dynamics calculations for KLT exhibit a Li off-centering instability. The energetics of Li-displacements for isolated Li-ions and for Li-Li pairs up to 4th neighbors were calculated. Interactions between nearest neighbor Li-ions, in a Li-Li pair, strongly favor ferroelectric alignment along the pair axis. Such Li-Li pairs can be considered "seeds" for polar nanoclusters in KLT. Electrostriction, local oxygen relaxation, coupling to the KT soft-mode, and interactions with neighboring Li-ions all enhance the polarization from Li off-centering. Calculated hopping barriers for isolated Li-ions and for nearest neighbor Li-Li pairs are in good agreement with Arrhenius fits to experimental dielectric data.Comment: 14 pages including 10 figures. To Physical Review B. Replaced after corrections due to referees' remark

Summary Report for the Technical Interchange Meeting on Development of Baseline Material Properties and Design Guidelines for In-Space Manufacturing Activities

NASA Marshall Space Flight Center (MSFC) and the Agency as a whole are currently engaged in a number of in-space manufacturing (ISM) activities that have the potential to reduce launch costs, enhance crew safety, and provide the capabilities needed to undertake long-duration spaceflight. The recent 3D Printing in Zero-G experiment conducted on board the International Space Station (ISS) demonstrated that parts of acrylonitrile butadiene styrene (ABS) plastic can be manufactured in microgravity using fused deposition modeling (FDM). This project represents the beginning of the development of a capability that is critical to future NASA missions. Current and future ISM activities will require the development of baseline material properties to facilitate design, analysis, and certification of materials manufactured using in-space techniques. The purpose of this technical interchange meeting (TIM) was to bring together MSFC practitioners and experts in materials characterization and development of baseline material properties for emerging technologies to advise the ISM team as we progress toward the development of material design values, standards, and acceptance criteria for materials manufactured in space. The overall objective of the TIM was to leverage MSFC's shared experiences and collective knowledge in advanced manufacturing and materials development to construct a path forward for the establishment of baseline material properties, standards development, and certification activities related to ISM. Participants were asked to help identify research and development activities that will (1) accelerate acceptance and adoption of ISM techniques among the aerospace design community; (2) benefit future NASA programs, commercial technology developments, and national needs; and (3) provide opportunities and avenues for further collaboration

Identification of the initial molecular changes in response to circulating angiogenic cells-mediated therapy in critical limb ischemia

BackgroundCritical limb ischemia (CLI) constitutes the most aggressive form of peripheral arterial occlusive disease, characterized by the blockade of arteries supplying blood to the lower extremities, significantly diminishing oxygen and nutrient supply. CLI patients usually undergo amputation of fingers, feet, or extremities, with a high risk of mortality due to associated comorbidities.Circulating angiogenic cells (CACs), also known as early endothelial progenitor cells, constitute promising candidates for cell therapy in CLI due to their assigned vascular regenerative properties. Preclinical and clinical assays with CACs have shown promising results. A better understanding of how these cells participate in vascular regeneration would significantly help to potentiate their role in revascularization.Herein, we analyzed the initial molecular mechanisms triggered by human CACs after being administered to a murine model of CLI, in order to understand how these cells promote angiogenesis within the ischemic tissues.MethodsBalb-c nude mice (n:24) were distributed in four different groups: healthy controls (C, n:4), shams (SH, n:4), and ischemic mice (after femoral ligation) that received either 50 mu l physiological serum (SC, n:8) or 5x10(5) human CACs (SE, n:8). Ischemic mice were sacrificed on days 2 and 4 (n:4/group/day), and immunohistochemistry assays and qPCR amplification of Alu-human-specific sequences were carried out for cell detection and vascular density measurements. Additionally, a label-free MS-based quantitative approach was performed to identify protein changes related.ResultsAdministration of CACs induced in the ischemic tissues an increase in the number of blood vessels as well as the diameter size compared to ischemic, non-treated mice, although the number of CACs decreased within time. The initial protein changes taking place in response to ischemia and more importantly, right after administration of CACs to CLI mice, are shown.ConclusionsOur results indicate that CACs migrate to the injured area; moreover, they trigger protein changes correlated with cell migration, cell death, angiogenesis, and arteriogenesis in the host. These changes indicate that CACs promote from the beginning an increase in the number of vessels as well as the development of an appropriate vascular network.Institute of Health Carlos III, ISCIII; Junta de Andaluci