3,588 research outputs found
Cost projections for Redox Energy storage systems
A preliminary design and system cost analysis was performed for the redox energy storage system. A conceptual design and cost estimate was prepared for each of two energy applications: (1) electric utility 100-MWh requirement (10-MW for ten hours) for energy storage for utility load leveling application, and (2) a 500-kWh requirement (10-kW for 50 hours) for use with a variety of residential or commercial applications, including stand alone solar photovoltaic systems. The conceptual designs were based on cell performance levels, system design parameters, and special material costs. These data were combined with estimated thermodynamic and hydraulic analysis to provide preliminary system designs. Results indicate that the redox cell stack to be amenable to mass production techniques with a relatively low material cost
MUFAN, a computer program for the analysis of multi-loop fluid flow systems
MUFAN program for determining pressures, flow rates, and pressure drops in systems involving one dimensional incompressible steady state fluid flo
Design and Optimization of the SPOT Primary Mirror Segment
The 3m Spherical Primary Optical Telescope (SPOT) will utilize a single ring of 0.86111 point-to-point hexagonal mirror segments. The f2.85 spherical mirror blanks will be fabricated by the same replication process used for mass-produced commercial telescope mirrors. Diffraction-limited phasing will require segment-to-segment radius of curvature (ROC) variation of approx.1 micron. Low-cost, replicated segment ROC variations are estimated to be almost 1 mm, necessitating a method for segment ROC adjustment & matching. A mechanical architecture has been designed that allows segment ROC to be adjusted up to 400 microns while introducing a minimum figure error, allowing segment-to-segment ROC matching. A key feature of the architecture is the unique back profile of the mirror segments. The back profile of the mirror was developed with shape optimization in MSC.Nastran(TradeMark) using optical performance response equations written with SigFit. A candidate back profile was generated which minimized ROC-adjustment-induced surface error while meeting the constraints imposed by the fabrication method. Keywords: optimization, radius of curvature, Pyrex spherical mirror, Sigfi
Engineering Electromagnetic Properties of Periodic Nanostructures Using Electrostatic Resonances
Electromagnetic properties of periodic two-dimensional sub-wavelength
structures consisting of closely-packed inclusions of materials with negative
dielectric permittivity in a dielectric host with positive
can be engineered using the concept of multiple electrostatic
resonances. Fully electromagnetic solutions of Maxwell's equations reveal
multiple wave propagation bands, with the wavelengths much longer than the
nanostructure period. It is shown that some of these bands are described using
the quasi-static theory of the effective dielectric permittivity
, and are independent of the nanostructure period. Those bands
exhibit multiple cutoffs and resonances which are found to be related to each
other through a duality condition. An additional propagation band characterized
by a negative magnetic permeability develops when a magnetic moment is induced
in a given nano-particle by its neighbors. Imaging with sub-wavelength
resolution in that band is demonstrated
Numerical Calculations of Acoustic Emission
A computer program [1] which solves the partial differential equations for sound propagation numerically is applied to the study of problems in acoustic emission. The program uses finite difference techniques to calculate sound fields due to distributions of sources in complex geometries in two dimensions. The potential to handle more complex geometries and to model more realistic sources is the main advantage of this type of calculation over the analytic calculations. The main disadvantage of the numerical technique is the cost of obtaining results since a large main frame computer or supercomputer is required
Recommended from our members
Impact of actinide recycle on nuclear fuel cycle health risks
The purpose of this background paper is to summarize what is presently known about potential impacts on the impacts on the health risk of the nuclear fuel cycle form deployment of the Advanced Liquid Metal Reactor (ALMR){sup 1} and Integral Fast Reactor (IF){sup 2} technology as an actinide burning system. In a companion paper the impact on waste repository risk is addressed in some detail. Therefore, this paper focuses on the remainder of the fuel cycle
Elucidation of the Photorhabdus temperata Genome and Generation of a Transposon Mutant Library To Identify Motility Mutants Altered in Pathogenesis
The entomopathogenic nematode Heterorhabditis bacteriophora forms a specific mutualistic association with its bacterial partner Photorhabdus temperata. The microbial symbiont is required for nematode growth and development, and symbiont recognition is strain specific. The aim of this study was to sequence the genome of P. temperata and identify genes that plays a role in the pathogenesis of the Photorhabdus-Heterorhabditis symbiosis. A draft genome sequence of P. temperata strain NC19 was generated. The 5.2-Mb genome was organized into 17 scaffolds and contained 4,808 coding sequences (CDS). A genetic approach was also pursued to identify mutants with altered motility. A bank of 10,000 P. temperata transposon mutants was generated and screened for altered motility patterns. Five classes of motility mutants were identified: (i) nonmotile mutants, (ii) mutants with defective or aberrant swimming motility, (iii) mutant swimmers that do not require NaCl or KCl, (iv) hyperswimmer mutants that swim at an accelerated rate, and (v) hyperswarmer mutants that are able to swarm on the surface of 1.25% agar. The transposon insertion sites for these mutants were identified and used to investigate other physiological properties, including insect pathogenesis. The motility-defective mutant P13-7 had an insertion in the RNase II gene and showed reduced virulence and production of extracellular factors. Genetic complementation of this mutant restored wild-type activity. These results demonstrate a role for RNA turnover in insect pathogenesis and other physiological functions
Synthetic Mudscapes: Human Interventions in Deltaic Land Building
In order to defend infrastructure, economy, and settlement in Southeast Louisiana, we must construct new land to
mitigate increasing risk. Links between urban environments and economic drivers have constrained the dynamic delta
landscape for generations, now threatening to undermine the ecological fitness of the entire region. Static methods of
measuring, controlling, and valuing land fail in an environment that is constantly in flux; change and indeterminacy are
denied by traditional inhabitation.
Multiple land building practices reintroduce deltaic fluctuation and strategic deposition of fertile material to form the
foundations of a multi-layered defence strategy. Manufactured marshlands reduce exposure to storm surge further
inland. Virtual monitoring and communication networks inform design decisions and land use becomes determined
by its ecological health. Mudscapes at the threshold of land and water place new value on former wastelands. The
social, economic, and ecological evolution of the region are defended by an expanded web of growing land
- …