Gesunder Boden - gesunde Pflanzen

Obwohl viele ältere Biobetriebe kleinere Nährstoffgehalte im Boden aufwiesen, waren diese noch nicht ertragsbegrenzend. Die abnehmenden Nährstoffgehalte im Boden und den Pflanzen zeigen, dass regelmässige Bodenanalysen auf dem Biobetrieb nötig sind. Die Suppressivität der Böden hing nicht direkt von den Biojahren ab. Durch die Gestaltung der Fruchtfolge und den Hofdüngereinsatz lässt sie sich aber steigern. Der Zusammenhang zwischen Bewirtschaftung Bodeneigenschaften und der Suppressivität muss genauer untersucht werden

Electronic structure of intentionally disordered AlAs/GaAs superlattices

We use realistic pseudopotentials and a plane-wave basis to study the electronic structure of non-periodic, three-dimensional, 2000-atom (AlAs)_n/(GaAs)_m (001) superlattices, where the individual layer thicknesses n,m = {1,2,3} are randomly selected. We find that while the band gap of the equivalent (n = m = 2) ordered superlattice is indirect, random fluctuations in layer thicknesses lead to a direct gap in the planar Brillouin zone, strong wavefunction localization along the growth direction, short radiative lifetimes, and a significant band-gap reduction, in agreement with experiments on such intentionally grown disordered superlattices.Comment: 10 pages, REVTeX and EPSF macros, 4 figures in postscript. e-mail to [email protected]

Predicion of charge separation in GaAs/AlAs cylindrical Russian Doll nanostructures

We have contrasted the quantum confinement of (i) multiple quantum wells of flat GaAs and AlAs layers, i.e. (\GaAs)_{m}/(\AlAs)_n/(\GaAs)_p/(\AlAs)_q, with (ii) ``cylindrical Russian Dolls'' -- an equivalent sequence of wells and barriers arranged as concentric wires. Using a pseudopotential plane-wave calculation, we identified theoretically a set of numbers ($m,n,p$ and $q$) such that charge separation can exist in ``cylindrical Russian Dolls'': the CBM is localized in the inner GaAs layer, while the VBM is localized in the outer GaAs layer.Comment: latex, 8 page

Agronomical techniques to improve technological and sanitary quality

In spite of variable grain protein contents, baking quality of organic wheat was found to be acceptable to good. Mycotoxin (DON) infestation was generally low on tested grain samples. Choice of wheat cultivar was the most efficient way to obtain higher grain quality. Fertilization with readily available nitrogen and, to a lower extent, association with legumes and green manures with mixtures containing fodder legumes also improved grain quality. Reduced tillage affected soil quality and wheat yield but had little effects on grain quality

Nitrogen transformations and its underlying microbial communities in differently managed soils under future projected rainfall variability

Soil microbial communities play a fundamental role in maintaining a broad range of soil functions and ecosystem services. Especially nutrient provisioning to cultivated crops are of prime interest in agricultural contexts in order to maintain the production of food, fibre and fuel for the ever increasing human population. Since Nitrogen (N) is the most limiting nutrient in agroecosystem and it’s cycling and availability is highly dependent on microbial driven processes, we investigated the impact of farming systems on related ecosystem processes and herein involved soil microbial communities. Considering global climate change, also the potential to withstand rainfall variability was assessed

Techniques to improve technological and sanitary quality

Agronomical ways for better quality and safety Choice of cultivar is an efficient way to obtain higher grain quality. Intercropping legumes (grain or forage) improves weed competition and N availability for wheat crop or succeeding crop. Green manure can be an effective alternative to farmyard manure. Fertilization with readily available nitrogen improves yield and quality when water is available. Reduced tillage affects soil fertility and wheat yield but has little effects on grain quality. Technological ways for better quality and safety Milling process strongly influences flour characteristics. Stone milling improves nutritive value; characteristics remain very stable independent of the milling yield. Flour characteristics from roller milling appear very susceptible to the milling yield. Increasing the milling yield in the aim of enriching nutritional quality has a detrimental effect either on safety (DON) or on bread-making quality (bread volume)

Technological quality of organic wheat in Europe

The demand for high quality organic bread wheat is increasing. The quality level of organic wheat harvested in EU is mainly dependant on variety, environmental conditions and agronomic practices. In some countries, protein content and composition, influencing technological value, are equivalent to those produced under conventional practices. Beside agronomical techniques, technological processes can help to maintain a good quality. Pre-treatments before milling such as debranning were found to be efficient in reducing DON contamination. The project highlighted the necessity to redefine the methods to assess the quality of organic wheat

Influence of microwave plasma treatment on the surface properties of carbon fibers and their adhesion in a polypropylene matrix

A commercially available carbon fiber (CF) with an epoxy-based sizing (EP-sized CF) and an unsized CF have been plasma treated to study the effect on the fiber-matrix adhesion towards a polypropylene matrix. The EP-sized fiber was chosen because of its predictable low adhesion in a polypropylene (PP) matrix. The fibers have been modified using a microwave low-pressure O2/CO2/N2-gas plasma source (Cyrannus®) developed at IWS in a batch process. One aim of this study was the evaluation of parameters using high energies and short time periods in the plasma chamber to see the effect on mechanical performance of CF. These results will be the fundamental work for a planned continuous plasma modification line. The CF surface was characterized by determining the surface energies, single fiber tensile strength and XPS analysis. The adhesion behavior before and after plasma treatment was studied by single fiber pull-out test (SFPO) and scanning electron microscopy (SEM). It was shown that the CO2- and O2-plasma increases the number of functional groups on the fiber surface during short time plasma treatment of 30 s. Carboxylic groups on the unsized CF surface resulting from O2-plasma treatment lead to an enhanced fiber-matrix adhesion, whereas the fiber strength was merely reduced

Influence of microwave plasma treatment on the surface properties of carbon fibers and their adhesion in a polypropylene matrix

A commercially available carbon fiber (CF) with an epoxy-based sizing (EP-sized CF) and an unsized CF have been plasma treated to study the effect on the fiber-matrix adhesion towards a polypropylene matrix. The EP-sized fiber was chosen because of its predictable low adhesion in a polypropylene (PP) matrix. The fibers have been modified using a microwave low-pressure O2/CO2/N2-gas plasma source (Cyrannus®) developed at IWS in a batch process. One aim of this study was the evaluation of parameters using high energies and short time periods in the plasma chamber to see the effect on mechanical performance of CF. These results will be the fundamental work for a planned continuous plasma modification line. The CF surface was characterized by determining the surface energies, single fiber tensile strength and XPS analysis. The adhesion behavior before and after plasma treatment was studied by single fiber pull-out test (SFPO) and scanning electron microscopy (SEM). It was shown that the CO2- and O2-plasma increases the number of functional groups on the fiber surface during short time plasma treatment of 30 s. Carboxylic groups on the unsized CF surface resulting from O2-plasma treatment lead to an enhanced fiber-matrix adhesion, whereas the fiber strength was merely reduced