Effects of hip abductor strengthening on musculoskeletal loading in hip dysplasia patients after total hip replacement

Hip dysplasia patients after total hip replacement show worse functional performance compared to primary osteoarthritis patients, and unfortunately there is no research on muscle and joint loads that would help understand rehabilitation effects, motor dysfunctions and failure events. We tested the hypothesis that a higher functional improvement in hip dysplasia patients who received hip abductor strengthening after hip replacement, would result in different gait function and musculoskeletal loads during walking compared to patients who performed standard rehabilitation only. In vivo gait analysis and musculoskeletal modeling were used to analyze the differences in gait parameters and hip and muscle forces during walking between the two groups of patients. We found that, in a functional scenario of very mild abnormalities, the patients who performed muscle strengthening expressed a more physiological force pattern and a generally greater force in the operated limb, although statistically significant in limited portions of the gait cycle, and likely related to a higher gait speed. We conclude that in a low-demand task, the abductor strengthening program does not have a marked effect on hip loads, and further studies on hip dysplasia patients would help clarify the effect of muscle strengthening on loads

A new ligament-compatible patient-specific 3D-printed implant and instrumentation for total ankle arthroplasty: from biomechanical studies to clinical cases

Background: Computer navigation and patient-specific instrumentation for total ankle arthroplasty have still to demonstrate their theoretical ability to improve implant positioning and functional outcomes. The purpose of this paper is to present a new and complete total ankle arthroplasty customization process for severe posttraumatic ankle joint arthritis, consisting of patient-specific 3D-printed implant and instrumentation, starting from a ligament-compatible design. Case presentation: The new customization process was proposed in a 57-year-old male patient and involved image analysis, joint modeling, prosthesis design, patient-specific implant and instrumentation development, relevant prototyping, manufacturing, and implantation. Images obtained from a CT scan were processed for a 3D model of the ankle, and the BOX ankle prosthesis (MatOrtho, UK) geometries were customized to best fit the model. Virtual in silico, i.e., at the computer, implantation was performed to optimize positioning of these components. Corresponding patient-specific cutting guides for bone preparation were designed. The obtained models were printed in ABS by additive manufacturing for a final check. Once the planning procedure was approved, the models were sent to final state-of-the-art additive manufacturing (the metal components using cobalt-chromium-molybdenum powders, and the guides using polyamide). The custom-made prosthesis was then implanted using the cutting guides. The design, manufacturing, and implantation procedures were completed successfully and consistently, and final dimensions and location for the implant corresponded with the preoperative plan. Immediate post-op X-rays showed good implant positioning and alignment. After 4 months, clinical scores and functional abilities were excellent. Gait analysis showed satisfactory joint moment at the ankle complex and muscle activation timing within normality. Conclusions: The complete customization process for total ankle arthroplasty provided accurate and reliable implant positioning, with satisfactory short-term clinical outcomes. However, further studies are needed to confirm the potential benefits of this complete customization process. Level of evidence: 5. Case report

Analysis of clinical profiles, deformities, and plantar pressure patterns in diabetic foot syndrome

Diabetic foot syndrome refers to heterogeneous clinical and biomechanical profiles, which render predictive models unsatisfactory. A valuable contribution may derive from identification and descriptive analysis of well-defined subgroups of patients. Clinics, biology, function, gait analysis, and plantar pressure variables were assessed in 78 patients with diabetes. In 15 of them, the 3D architecture of the foot bones was characterized by using weight-bearing CT. Patients were grouped by diabetes type (T1, T2), presence (DN) or absence (DNN) of neuropathy, and obesity. Glycated hemoglobin (HbA1c) and plantar lesions were monitored during a 48-month follow-up. Statistical analysis showed significant differences between the groups for at least one clinical (combined neuropathy score, disease duration, HbA1c), biological (age, BMI), functional (joint mobility, foot alignment), or biomechanical (regional peak pressure, pressure-time integral, cadence, velocity) variable. Twelve patients ulcerated during follow-up (22 lesions in total), distributed in all groups but not in the DNN T2 non-obese group. These showed biomechanical alterations, not always occurring at the site of lesion, and HbA1c and neuropathy scores higher than the expected range. Three of them, who also had weight-bearing CT analysis, showed >40% of architecture parameters outside the 95%CI. Appropriate grouping and profiling of patients based on multi-instrumental clinical and biomechanical analysis may help improve prediction modelling and management of diabetic foot syndrome

Food-related consumer behaviours in times of crisis : Changes in the wake of the Ukraine war, rising prices and the aftermath of the COVID-19 pandemic

When the COVID-19 pandemic subsided, the war in Ukraine led to further disruptions in consumers’ daily behaviours, with rising prices for food and energy. We conducted a survey study on self-reported changes in food-related consumer behaviour in ten European countries and compared the results to a similar study conducted two years ago. A latent class cluster analysis distinguished five clusters and showed that different types of consumers can be distinguished based on how they react to the crisis as regards their eating habits. 19% of survey participants reported no major changes, and 32% reported changes mostly in terms of more price sensitivity. Among those that reported changes beyond reacting to higher prices, there are indications of more mindful eating and more deliberate choices. The changes already found earlier in response to the COVID-19 pandemic therefore seem to have been strengthened and supplemented by reactions to price increases. The results present a challenge to the food industry in terms of supplying healthy and sustainable food at affordable prices.© 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed

Weight bearing versus conventional CT for the measurement of patellar alignment and stability in patients after surgical treatment for patellar recurrent dislocation

Purpose: To compare weight-bearing cone-beam computer tomography (CBCT) and conventional computer tomography (CT)-based measurements of patellofemoral alignment and stability in patients surgically treated for recurrent patellar dislocation. These scans implied respectively single-leg up-right posture, the knee flexed, and lower limb muscles activation, versus supine position with the knee extended. Methods: A total of 17 patients (11 males/6 females) after surgical reconstruction with fascia lata allograft for recurrent patellofemoral dislocation were analyzed at 60-month follow-up. Tilt and congruence angles and tibial tuberosity–trochlear groove (TT-TG) offset were measured on images obtained from CBCT and conventional CT scans by three independent and expert radiologists. Paired t tests were performed to compare measurements obtained from the two scans. Inter-rater reliability was assessed using a two-way mixed-effects model intra-class correlation coefficient (ICC). Results: Only TT-TG offset was found significantly smaller (p < 0.001) in CBCT (mean 9.9 ± 5.3 mm) than in conventional CT (mean 15.9 ± 4.9 mm) scans. ICC for tilt and congruence angles and for TT-TG offset ranged between 0.80–0.94 with measurements in CBCT scans, between 0.52 and0.78 in conventional CT. Conclusion: In patients surgically treated for recurrent patellar dislocation, TT-TG offset was found overestimated with conventional CT. All measurements of patellofemoral stability and alignment were found more consistent when obtained with weight-bearing CBCT compared to conventional CT

Gata2 related conditions and predisposition to pediatric myelodysplastic syndromes

Myelodysplastic syndromes (MDS) are hematopoietic disorders rare in childhood, often occurring in patients with inherited bone marrow failure syndromes or germinal predisposition syndromes. Among the latter, one of the most frequent involves the gene GATA binding protein 2 (GATA2), coding for a transcriptional regulator of hematopoiesis. The genetic lesion as well as the clinical phenotype are extremely variable; many patients present hematological malignancies, especially MDS with the possibility to evolve into acute myeloid leukemia. Variable immune dysfunction, especially resulting in B-and NK-cell lymphopenia, lead to severe infections, including generalized warts and mycobacterial infection. Defects of alveolar macrophages lead to pulmonary alveolar proteinosis through inadequate clearance of surfactant proteins. Currently, there are no clear guidelines for the monitoring and treatment of patients with GATA2 mutations. In patients with MDS, the only curative treatment is allogeneic hematopoietic stem cell transplantation (HSCT) that restores normal hematopoiesis preventing the progression to acute myeloid leukemia and clears long-standing infections. However, to date, the donor type, conditioning regimen, and the optimal time to proceed to HSCT, as well as the level of chimerism needed to reverse the phenotype, remain unclear highlighting the need for consensus guidelines

Mechanical and in vitro biological properties of uniform and graded Cobalt-chrome lattice structures in orthopedic implants

Human bones are biological examples of functionally graded lattice capable to withstand large in vivo loading and allowing optimal stress distribution. Disruption of bone integrity may require biocompatible implants capable to restore the original bone structure and properties. This study aimed at comparing mechanical properties and biological behavior in vitro of uniform (POR-FIX) and graded (POR-VAR) Cobalt-chrome alloy lattice structures manufactured via Selective Laser Melting. In compression, the POR-VAR equivalent maximum stress was about 2.5 times lower than that of the POR-FIX. According to the DIC analysis, the graded lattice structures showed a stratified deformation associated to unit cells variation. At each timepoint, osteoblast cells were observed to colonize the surface and the first layer of both scaffolds. Cell activity was always significantly higher in the POR-VAR (p < 0.0005). In terms of gene expression, the OPG/RANKL ratio increased significantly over time (p < 0.0005) whereas IL1β and COX2 significantly decreased (7 day vs 1 day; p < 0.0005) in both scaffolds. Both uniform- and graded-porosity scaffolds provided a suitable environment for osteoblasts colonization and proliferation, but graded structures seem to represent a better solution to improve stress distribution between implant and bone of orthopedic implants

Psoriatic arthritis: epidemiological and clinical aspects in a cohort of 1.306 italian patients

Because there is the impression that psoriatic arthritis is a composite disorder with mild forms close to more severe and aggressive ones, we conducted a multicenter study with the aim of characterizing disease expression in a large cohort of Italian patients. One-thousand-three-hundred-six patients fulfilled inclusion criteria and were analyzed in this study. Psoriasis antedated the onset of arthritis in the majority of the cases (67.7%). More rare was inverse or simultaneous onset which occurred in 17.3% and 15.0% of the cases, respectively. Peripheral articular involvement (mono-oligo or polyarthritis) was recorded in 88.7% of the cases while spondylitis occurred in 11.3%. Peripheral enthesopathies were found in 28.1% of the cases with a marked occurrence in patients with axial involvement (64.5% vs 35.5% in oligo or polyarthritis). Abnormal levels of ESR and CRP respectively occurred in 52.2% and in 52.6% of the cases, while rheumatoid factor was detected in 5.0% of the cases. On the basis of distribution of joint involvement, symmetry and presence of peripheral enthesopathies we recognized three clusters of arthritis. Patients included in Cluster 1 and Cluster 2 showed a severe form of polyarthritis in most of the cases (82.9%), with increased serum levels of inflammatory indices in more than 85% of the cases. Almost all the hospitalized patients (97.1%) were included in this two clusters. They markedly assumed steroids and methotrexate or another DMARD. About half of the patients (51.1%) included in Cluster 3 showed mono-oligo articular involvement. Serum inflammatory indices were increased in 20.8% of the cases while hospitalization occurred only in 2.9% of the cases and NSAIDs were the treatment of choice. The evidence in our country of a large prevalence of severe forms of arthritis needing specific and aggressive approach outlines the requirement of an intense educational action aimed at increasing the awareness of this condition

Sanitary costs of osteoarthritis

Muscoloskeletal disorders are the first cause of disability and the second cause of permanent disablement in Italy. Osteoarthritis is the most frequent rheumatic disease and affects about 4 million Italians. In spite of that, data concerning social costs are lacking. On account of this lack we measured sanitary costs of 314 patients suffering from osteoarthritis. A retrospective, prevalence-based multicentric study was performed using a bottom-up approach. The study period was 12 months and referred to 1999. Eight percent of patients didn't take any drug for the treatment of osteoarthritis; NSAIDs were prescribed to 86.9% of patients, analgesics to 29.9%, chondroprotective drugs to 7.6%, and gastroprotective drugs to 36.9%. Total sanitary costs came to 455 euro / patient / year: 122 euro were spent on diagnostics, 293 euro on therapy and 40 euro on management of drug-related gastropathy. Since the costs of anti-inflammatory drugs came to 30 euro we calculated iatrogenic cost factor of 2.3. Moreover, the study supplied interesting informations about prescriptive habits, which differ in Italy from international guidelines for the medical treatment of OA, about patient management, because of hospitalization, which by itself absorbs 1/3 of resources, and about physiotherapy, which costs twice as much as pharmacological therapy. At last, data analysis gave the cue for suggestions on changing patients' managemen