124 research outputs found
Occupational health and safety issues in human-robot collaboration: State of the art and open challenges
Human-Robot Collaboration (HRC) refers to the interaction of workers and robots in a shared workspace. Owing to the integration of the industrial automation strengths with the inimitable cognitive capabilities of humans, HRC is paramount to move towards advanced and sustainable production systems. Although the overall safety of collaborative robotics has increased over time, further research efforts are needed to allow humans to operate alongside robots, with awareness and trust. Numerous safety concerns are open, and either new or enhanced
technical, procedural and organizational measures have to be investigated to design and implement inherently safe and ergonomic automation solutions, aligning the systems performance and the human safety. Therefore, a bibliometric analysis and a literature review are carried out in the present paper to provide a comprehensive overview of Occupational Health and Safety (OHS) issues in HRC. As a result, the most researched topics and application areas, and the possible future lines of research are identified. Reviewed articles stress the central role
played by humans during collaboration, underlining the need to integrate the human factor in the hazard analysis and risk assessment. Human-centered design and cognitive engineering principles also require further investigations to increase the worker acceptance and trust during collaboration. Deepened studies are compulsory in the healthcare sector, to investigate the social and ethical implications of HRC. Whatever the application context is, the implementation of more and more advanced technologies is fundamental to overcome the current HRC safety concerns, designing low-risk HRC systems while ensuring the system productivity
Life cycle analysis of innovative building materials based on circular coffee ground supply chain
The construction sector is widely recognized as one of the most polluting mainly due to its intensive exploitation of natural resources and large energy consumption to produce traditional building materials. In the last years, alternative building materials have been developed with the aim to reduce the environmental burden of this sector. In particular, the use of geopolymer mortars as alternative cementitious materials is gaining increasing acceptance among scientists. Numerous laboratory studies demonstrate their suitability for construction applications, highlighting the potential environmental benefits that can be obtained from their large-scale production. This study aims to perform a preliminary evaluation of the environmental performance of a geopolymer mortar, whose production includes the reuse of a food waste: Spent Coffee Ground (SCG). By using the Life Cycle Assessment (LCA) approach, an environmental comparison with a traditional production of cement mortar was carried out on the basis of the Global Warming Potential (GWP) indicator
Project management information systems (Pmiss): A statistical-based analysis for the evaluation of software packages features
Project Managers (PMs) working in competitive markets are finding Project Management Information Systems (PMISs) useful for planning, organizing and controlling projects of varying complexity. A wide variety of PMIS software is available, suitable for projects differing in scope and user needs. This paper identifies the most useful features found in PMISs. An extensive literature review and analysis of commercial software is made to identify the main features of PMISs. After-wards, the list is reduced by a panel of project management experts, and a statistical analysis is performed on data acquired by means of two different surveys. The relative importance of listed features is properly computed, and the interactions between the respondent’s profiles and PMIS features are also investigated by cluster and respondents’ analyses. The paper provides information for researchers and practitioners interested in PMISs packages and their applications. Furthermore, the analyses may help practitioners when choosing a PMIS, and also for developers of PMISs software in understanding user needs
Economic and Environmental Assessment of Biomass Power Plants in Southern Italy
In 2019, Europe adopted the New Green Deal as a strategic plan to become a competitive, resource-efficient, and driven economy by reducing its gas emissions and carbon footprint. Due the COVID-19 pandemic, this strategic plan was recently updated to expedite the green transition of European industries. Therefore, the present paper deals with the problem of deciding an appropriate size for a biomass plant that directly produces electric energy by means of two different conversion processes: combustion and gasification. After an initial estimation of the energy potential in western Sicily, GIS data of biomass growth were used to identify the appropriate size for the power plants under investigation. The economic feasibility of biomass utilization was evaluated over a capacity range of 10 to 30 MW, considering total capital investments, revenues from energy sales, and total operating costs. Moreover, the effect of variations on incentive prices was analyzed by means of a sensitivity analysis. Comparing the different plant solutions considered, the environmental sustainability was also analyzed using the life cycle assessment (LCA) approach. The results showed that the combustion solution had a higher profitability and a lower environmental impact for each plant size. The obtained results also demonstrated that providing power from residual biomass in small agricultural communities would significantly reduce their environmental impacts while improving the economic feasibility of their waste management practices
Food safety risk analysis from the producers' perspective: prioritisation of production process stages by HACCP and TOPSIS
[EN] From the manufacturers perspective, the Hazard Analysis and Critical Control Point
(HACCP) system nowadays represents the mainly way to implement the food safety risk
management in food industries. Nevertheless, the identification and prioritization of hazards as the
outcome of the first principle of HACCP is not sufficient to identify production process stages that
more significantly and critically contribute to the consumer¿s risks. With this recognition, the
present paper proposes a Quantitative Risk Assessment (QRA) approach based on HACCP and
Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) to individuate
production process phases on which implementing corrective actions to improve the consumers¿
safety. The designed methodological approach is implemented on the smoked salmon
manufacturing process of a real Sicilian industry.Certa, A.; Enea, M.; Galante, G.; Izquierdo Sebastián, J.; La Fata, CM. (2018). Food safety risk analysis from the producers' perspective: prioritisation of production process stages by HACCP and TOPSIS. International Journal of Management and Decision Making. 17(4):396-414. https://doi.org/10.1504/IJMDM.2018.095720S39641417
Regulation of mammary gland branching morphogenesis by the extracellular matrix and its remodeling enzymes.
A considerable body of research indicates that mammary gland branching morphogenesis is dependent, in part, on the extracellular matrix (ECM), ECM-receptors, such as integrins and other ECM receptors, and ECM-degrading enzymes, including matrix metalloproteinases (MMPs) and their inhibitors, tissue inhibitors of metalloproteinases (TIMPs). There is some evidence that these ECM cues affect one or more of the following processes: cell survival, polarity, proliferation, differentiation, adhesion, and migration. Both three-dimensional culture models and genetic manipulations of the mouse mammary gland have been used to study the signaling pathways that affect these processes. However, the precise mechanisms of ECM-directed mammary morphogenesis are not well understood. Mammary morphogenesis involves epithelial 'invasion' of adipose tissue, a process akin to invasion by breast cancer cells, although the former is a highly regulated developmental process. How these morphogenic pathways are integrated in the normal gland and how they become dysregulated and subverted in the progression of breast cancer also remain largely unanswered questions
Impaired perceptual learning in a mouse model of Fragile X syndrome is mediated by parvalbumin neuron dysfunction and is reversible.
To uncover the circuit-level alterations that underlie atypical sensory processing associated with autism, we adopted a symptom-to-circuit approach in the Fmr1-knockout (Fmr1-/-) mouse model of Fragile X syndrome. Using a go/no-go task and in vivo two-photon calcium imaging, we find that impaired visual discrimination in Fmr1-/- mice correlates with marked deficits in orientation tuning of principal neurons and with a decrease in the activity of parvalbumin interneurons in primary visual cortex. Restoring visually evoked activity in parvalbumin cells in Fmr1-/- mice with a chemogenetic strategy using designer receptors exclusively activated by designer drugs was sufficient to rescue their behavioral performance. Strikingly, human subjects with Fragile X syndrome exhibit impairments in visual discrimination similar to those in Fmr1-/- mice. These results suggest that manipulating inhibition may help sensory processing in Fragile X syndrome
Matrix metalloproteinases and their tissue inhibitors direct cell fate during cancer development
Differential usage of transcriptional start sites and polyadenylation sites in FMR1 premutation alleles†
5′- and 3′-untranslated regions (UTRs) are important regulators of gene expression and play key roles in disease progression and susceptibility. The 5′-UTR of the fragile X mental retardation 1 (FMR1) gene contains a CGG repeat element that is expanded (>200 CGG repeats; full mutation) and methylated in fragile X syndrome (FXS), the most common form of inherited intellectual disability (ID) and known cause of autism. Significant phenotypic involvement has also emerged in some individuals with the premutation (55–200 CGG repeats), including fragile X-associated premature ovarian insufficiency (FXPOI) in females, and the neurodegenerative disorder, fragile X-associated tremor/ataxia syndrome (FXTAS), in older adult carriers. Here, we show that FMR1 mRNA in human and mouse brain is expressed as a combination of multiple isoforms that use alternative transcriptional start sites and different polyadenylation sites. Furthermore, we have identified a novel human transcription start site used in brain but not in lymphoblastoid cells, and have detected FMR1 isoforms generated through the use of both canonical and non-canonical polyadenylation signals. Importantly, in both human and mouse, a specific regulation of the UTRs is observed in brain of FMR1 premutation alleles, suggesting that the transcript variants may play a role in premutation-related pathologies
- …