Explanation for twin tunnelling-induced surface settlements by changes in soil stiffness on account of stress history

In this article, a group of representative centrifuge tests were selected for numerical modelling to explain the surface settlements induced by sequential twin tunnelling. Both Modified Cam Clay model (MCC) and Three-Surface Kinematic Hardening model (3-SKH) were adopted in the simulation, which indicated the use of 3-SKH model conduced to mimicking more closely centrifuge model response. Via performing more contrastive numerical analyses with 3-SKH model, the influence of the first tunnel event on the stiffness of the soil around the second tunnel was quantitatively investigated, whereby the mechanism behind the observed surface settlements was finally made clear

Design and development of a large shear box for testing working platform material

On large construction projects where deep foundations are to be installed, a working platform is placed across the entire site. This is comprised of a layer of aggregate (often crushed construction waste) usually with a particle size ranging from 120 mm downwards. Deep foundations are installed using heavy and tall drilling rigs and the working platform is thus safety critical to reduce the risk of machinery sinking and/or toppling which would lead to accidents and often serious injury to workers. Currently available design guidance is felt to result in conservative designs and there are many benefits to be gained from a greater understanding of the behaviour of working platform material. The design of these platforms is primarily governed by the angle of friction of the platform material. The measurement of friction angle for geomaterials that have large particle sizes is problematic (due to reasons of scale) and is often addressed by scaling down the material's grading curve prior to testing in small to medium size direct shear apparatus. The work presented here details the design of and the rationale for a large scale direct shear apparatus suitable for testing geomaterials with particle size distributions of the type that would be utilised in working platforms

Spatial mobility and large-scale resource extraction: an analysis of community well-being and health in a copper mining area of Zambia

We examine population mobility around a newly-developed large-scale copper mine in Zambia and analyse how socioeconomic and health indicators differed amongst migrants, resettled households, and non-mobile local (e.g. non-migrant/-resettled) populations. Two cross-sectional household surveys in 2015 and 2019 collected quan-titative data on health, socioeconomic indicators, and resettlement and migration status. A wealth index for the pooled sample (N =990 households) was computed using a simplified list of household assets adapted from the Zambia Demographic and Health Survey. Logistic regression models were conducted to assess associations with health outcomes. In-migrants were younger than non-mobile locals (mean age of household head 33.9 vs. 37.7 years), more highly educated (34.3% of household heads completed secondary school vs. 7.3%), had higher employment (43.8% vs. 15.8%), and higher mean wealth (3.6 vs. 3.0). The odds of having a child <5 years diagnosed with malaria (OR: 0.53, 95% CI: 0.40, 0.71) or classified as stunted (OR: 0.66, 95% CI: 0.50, 0.87) were significantly lower for migrants during the construction phase, even after adjusting for family wealth score. Migrant and resettled households had greater wealth and assets even after adjusting for age, education, and employment, suggesting spatial mobility is associated with improved socioeconomic status and disease prevention

Changes in household wealth in communities living in proximity to a large-scale copper mine in Zambia

Large-scale mining can alter the living conditions of surrounding communities in positive and negative ways. A health impact assessment conducted in the context of a newly developed large-scale copper mine in rural Zambia gave us the opportunity to measure changes in health determinants over time. We conducted periodic household surveys at baseline in 2011, during the construction phase in 2015 and during the operational phase in 2019. Data collected included economic indicators that were based on the standardized list of household assets used in the Zambia Demographic and Health Survey, which we subsequently converted into a wealth score using principal component analysis. We compared mean wealth scores in six communities directly impacted by the mine with comparison communities, as well as the rest of the North-Western province of Zambia. A difference-indifferences linear regression model was used to compare changes over time. Mean wealth of the communities near the mine was significantly lower at baseline than that of the North-Western province (? 0.54 points; pvalue< 0.001) in 2011, but surpassed the regional average in 2019 (+1.07 points; p-value <0.001). Mean wealth increased more rapidly in communities directly impacted by mine than in the comparison communities (+0.30 points, p-value <0.001). These results suggest a positive impact on living conditions in communities living near this copper mine. Our findings underscore the potential of the mining sector to contribute to economic development in Zambia

Changes in socioeconomic determinants of health in a copper mine development area, northwestern Zambia

In 2011, an industrial copper mine was developed in northwestern Zambia. A health impact assessment was conducted to anticipate and address potential health impacts. To monitor these impacts, three community-based surveys were conducted in the area (2011, 2015 and 2019). We analysed these data to determine how household socioeconomic indicators - considered determinants of health - have changed in the area over time. In mine-impacted communities, between 2011 (pre-construction) and 2019, significant changes were observed for: (i) average household size (-0.6 members); (ii) proportion of mothers that have not completed primary school (+20.4%); (iii) ownership of economic assets (e.g. phones +29.3%; televisions +15.6%); (iv) access to safe drinking water (+27.4%); and (v) improved housing structures (e.g. finished roof +58.6%). When comparing changes between 2015 and 2019 in impacted communities to nearby comparison communities, there was (i) an increased proportion of mothers that had not completed primary school in comparison communities vs. no change in impacted communities; and (ii) increased ownership of economic assets in impacted vs. comparison communities in 2019. This study found generally positive changes in the socioeconomic development of impacted compared to comparison communities, with the most pronounced improvements in the early phases of mine development

The PHIN photoinjector for the CTF3 Drive beam

A new photoinjector for the CTF3 drive beam has been designed and is now being constructed by a collaboration among LAL, CCLRC and CERN within PHIN, the second Joint Research Activity of CARE. The photoinjector will provide a train of 2332 pulses at 1.5 GHz with a complex timing structure (sub-trains of 212 pulses spaced from one another by 333 ps or 999 ps) to allow the frequency multiplication scheme, which is one of the features of CLIC, to be tested in CTF3. Each pulse of 2.33 nC will be emitted by a Cs2Te photocathode deposited by a co-evaporation process to allow high quantum efficiency in operation (>3% for a minimum of 40 h). The 3 GHz, 2 1/2 cell RF gun has a 2 port coupler to minimize emittance growth due to asymmetric fields, racetrack profile of the irises and two solenoids to keep the emittance at the output below 20 p.mm.mrad. The laser has to survive very high average powers both within the pulse train (15 kW) and overall (200 W before pulse slicing). Challenging targets are also for amplitude stability (<0.25% rms) and time jitter from pulse to pulse (<1ps rms). An offline test in a dedicated line is foreseen at CERN in 2007

Enhanced He-alpha emission from "smoked" Ti targets irradiated with 400nm, 45 fs laser pulses

We present a study of He-like 1s(2)-1s2p line emission from solid and low-density Ti targets under similar or equal to 45 fs laser pulse irradiation with a frequency doubled Ti: Sapphire laser. By varying the beam spot, the intensity on target was varied from 10(15) W/cm(2) to 10(19) W/cm(2). At best focus, low density "smoked" Ti targets yield similar to 20 times more He-alpha than the foil targets when irradiated at an angle of 45 degrees with s-polarized pulses. The duration of He-alpha emission from smoked targets, measured with a fast streak camera, was similar to that from Ti foils