1,345 research outputs found
Strain-induced kinetics of intergrain defects as the mechanism of slow dynamics in the nonlinear resonant response of humid sandstone bars
A closed-form description is proposed to explain nonlinear and slow dynamics
effects exhibited by sandstone bars in longitudinal resonance experiments.
Along with the fast subsystem of longitudinal nonlinear displacements we
examine the strain-dependent slow subsystem of broken intergrain and
interlamina cohesive bonds. We show that even the simplest but
phenomenologically correct modelling of their mutual feedback elucidates the
main experimental findings typical for forced longitudinal oscillations of
sandstone bars, namely, (i) hysteretic behavior of a resonance curve on both
its up- and down-slopes, (ii) linear softening of resonant frequency with
increase of driving level, and (iii) gradual recovery (increase) of resonant
frequency at low dynamical strains after the sample was conditioned by high
strains. In order to reproduce the highly nonlinear elastic features of
sandstone grained structure a realistic non-perturbative form of strain
potential energy was adopted. In our theory slow dynamics associated with the
experimentally observed memory of peak strain history is attributed to
strain-induced kinetic changes in concentration of ruptured inter-grain and
inter-lamina cohesive bonds causing a net hysteretic effect on the elastic
Young's modulus. Finally, we explain how enhancement of hysteretic phenomena
originates from an increase in equilibrium concentration of ruptured cohesive
bonds that are due to water saturation.Comment: 5 pages, 3 figure
When do homomorphism counts help in query algorithms?
A query algorithm based on homomorphism counts is a procedure for determining
whether a given instance satisfies a property by counting homomorphisms between
the given instance and finitely many predetermined instances. In a left query
algorithm, we count homomorphisms from the predetermined instances to the given
instance, while in a right query algorithm we count homomorphisms from the
given instance to the predetermined instances. Homomorphisms are usually
counted over the semiring N of non-negative integers; it is also meaningful,
however, to count homomorphisms over the Boolean semiring B, in which case the
homomorphism count indicates whether or not a homomorphism exists. We first
characterize the properties that admit a left query algorithm over B by showing
that these are precisely the properties that are both first-order definable and
closed under homomorphic equivalence. After this, we turn attention to a
comparison between left query algorithms over B and left query algorithms over
N. In general, there are properties that admit a left query algorithm over N
but not over B. The main result of this paper asserts that if a property is
closed under homomorphic equivalence, then that property admits a left query
algorithm over B if and only if it admits a left query algorithm over N. In
other words and rather surprisingly, homomorphism counts over N do not help as
regards properties that are closed under homomorphic equivalence. Finally, we
characterize the properties that admit both a left query algorithm over B and a
right query algorithm over B.Comment: 24 page
Toepassing van het concept EPA als verbinding tussen professionele activiteiten en CanMEDS competentie-gebieden: pilotstudie Physician Assistant Urologie
Large-scale extrusion processing and characterization of hybrid nylon-6/SiO2 nanocomposites
Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide-6 (PA-6) is achieved using a twin-screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h(-1) with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA-6 showed higher amounts of gamma-phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E-modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E' and E") increased and tan 6 decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright (C) 2004 John Wiley Sons, Ltd.</p
In vitro effect of fluoride oral hygiene tablets on artificial caries lesion formation and remineralization in human enamel
<p>Abstract</p> <p>Background</p> <p>Aim of this <it>in-vitro</it>-study was to assess the remineralization potential of a tooth cleaning tablet with different fluoride content.</p> <p>Methods</p> <p>Twenty three caries free impacted third molars were examined, enamel surfaces were wax coated leaving two 3 × 4 mm windows for exposure to demineralization/remineralization cycles. The teeth were randomly assigned to 4 groups of 5 control and 6 experimental teeth. Demineralization by standardised HEC-gel, pH 4.7 at 37°C for 72 h, was alternated by rinsing in remineralization solution, pH 7.0 at 37°C for 72 h, total challenge time 432 h. The negative control group N was treated during remineralization cycles with saline; positive control group P was treated with remineralization solution; experimental group D1 was exposed to remineralization solution containing Denttabs<sup>®</sup>-tablets with 1450 ppm F; experimental group D2 was exposed to remineralization solution and Denttabs<sup>®</sup>-tablets with 4350 ppm F. Each tooth was cut into serial sections and analyzed by polarized light microscopy for assessment of the different zones of white-spot lesions in 3 representative sections. Statistical analysis was based on the <it>Mann-Whitney</it>-Test.</p> <p>Results</p> <p>Both control groups N(-) and P(+) exhibited characteristic white-spot lesions. The remineralization and the demineralization inhibition of the lesions increased considerably from N<P < D1<D2. Denttabs<sup>®</sup>-2 administration showed partial/total remineralization including lamination and/or disappearance of the body of the lesion. The different results of all 4 groups were statistically highly significant (p < 0.01) with both tests.</p> <p>Conclusion</p> <p>Based on these results the novel Denttabs<sup>® </sup>formulation represents a highly effective oral hygiene product and the remineralization is correlated to the fluoride content.</p
Effect of switching from acenocoumarol to phenprocoumon on time in therapeutic range and INR variability:A cohort study
BACKGROUND: Treatment with vitamin K antagonists (VKA) requires a high proportion of time in the therapeutic range (TTR) and a low international normalised ratio (INR) variability to be maximally safe and effective. Switching from short-acting acenocoumarol to long-acting phenprocoumon could improve VKA control. AIMS: We assessed whether switching from acenocoumarol to phenprocoumon improves the time in the therapeutic range (TTR) and INR variability. METHODS AND RESULTS: In a retrospective cohort with data on 236,957 patients-years of VKA management from two first-line anticoagulation clinics in the Netherlands, we identified 124 patients in target range 2-3, 269 patients in target range 2-3.5 and 98 patients in target range 2.5-3.5 who switched from acenocoumarol to phenprocoumon. They were matched in a 1:2 ratio to non-switching controls using propensity score matching. Over the first 180 days after a switch, switchers' TTR declined 5 (95% CI 1 to 10), 10 (95% CI 7 to 13) and 5 (95% CI 0 to 11) percentage points relative to non-switchers, in target ranges 2-3, 2-3.5 and 2.5-3.5. Anticoagulation was more often supra-therapeutic in switchers, and switchers had a higher INR variability. In the following 180 days, TTR in switchers became 1 (95% CI -4 to 6), 4 (95% CI 0 to 7) and 6 (95% CI 1 to 12) percentage points better than in non-switchers. Switchers' INRs were much more stable than non-switchers'. CONCLUSION: Eventually, a switch from acenocoumarol to phenprocoumon leads to a higher TTR and a lower INR variability. However, this is preceded by a transition period with opposite effects. An improved conversion algorithm could possibly shorten the transition period. Until then, physicians and patients should decide whether switching is worth the increased risk during the transition phase
Type of intrinsic resistant starch type 3 determines in vitro fermentation by pooled adult faecal inoculum
Resistant starch (RS) results in relatively high health-beneficial butyrate levels upon fermentation by gut microbiota. We studied how physico-chemical characteristics of RS-3 influenced butyrate production during fermentation. Six highly resistant RS-3 substrates (intrinsic RS-3, 80-95 % RS) differing in chain length (DPn 16-76), Mw distribution (PI) and crystal type (A/B) were fermented in vitro by pooled adult faecal inoculum. All intrinsic RS-3 substrates were fermented to relatively high butyrate levels (acetate/butyrate ≤ 2.5), and especially fermentation of A-type RS-3 prepared from polydisperse α-1,4 glucans resulted in the highest relative butyrate amount produced (acetate/butyrate: 1). Analysis of the microbiota composition after fermentation revealed that intrinsic RS-3 stimulated primarily Lachnospiraceae, Bifidobacterium and Ruminococcus, but the relative abundances of these taxa differed slightly depending on the RS-3 physico-chemical characteristics. Especially intrinsic RS-3 of narrow disperse Mw distribution stimulated relatively more Ruminococcus. Selected RS fractions (polydisperse Mw distribution) obtained after pre-digestion were fermented to acetate and butyrate (ratio ≤ 1.8) and stimulated Lachnospiraceae and Bifidobacterium. This study indicates that especially the α-1,4 glucan Mw distribution dependent microstructure of RS-3 influences butyrate production and microbiota composition during RS-3 fermentation.</p
D-dimer: Preanalytical, analytical, postanalytical variables, and clinical applications
D-dimer is a soluble fibrin degradation product deriving from the plasmin-mediated degradation of cross-linked fibrin. D-dimer can hence be considered a biomarker of activation of coagulation and fibrinolysis, and it is routinely used for ruling out venous thromboembolism (VTE). D-dimer is increasingly used to assess the risk of VTE recurrence and to help define the optimal duration of anticoagulation treatment in patients with VTE, for diagnosing disseminated intravascular coagulation, and for screening medical patients at increased risk of VTE. This review is aimed at (1) revising the definition of D-dimer; (2) discussing preanalytical variables affecting the measurement of D-dimer; (3) reviewing and comparing assay performance and some postanalytical variables (e.g. different units and age-adjusted cutoffs); and (4) discussing the use of D-dimer measurement across different clinical settings
- …