Semi High Speed Steels for Roughing Rolls with improved Thermal Fatigue Resistance

Thermal fatigue represents one of the most significant causes for roughing mill roll deterioration and possible failure. The materials ability to withstand thermal cycling is strictly correlated to its microstructural properties, which are the result of the solidification process and following heat treatment. Rolls for hot strip rolling mills are usually produced by centrifugal casting, without subsequent forging. A crucial role is played by the eutectic carbide network developing on solidification, which represents a preferential pattern for crack propagation. For this reason conventional highly alloyed HSS are not a popular substitute for traditional Chromium steel rolls in rougher stands. The so - called “semi-HSS”, containing less C (0.7-0.9 %C) and alloying elements are usually preferred by users requiring improved roll material. Specially developed “HSS for roughers” are being tested in various mills, but they are out of the scope of this paper. The present work is part of a continuing effort by INNSE Cilindri (RIVA Group) and Trento University to improve the “semi HSS” grades. In particular the thermal fatigue resistance of a new class of low-C semi HSS is evaluated. For purpose of comparison, both a conventional semi-HSS and a HSS grade were also considered. The test is based on induction heating (Tmax=670°C) and water cooling of cylindrical discs. Experimental results confirm the lower susceptibility towards heat checking of the new grades, containing reduced amount of eutectic carbides, the best behaviour being exhibited by a steel with a mixed martensite-bainite matrix microstructure

Planck-LFI: Design and Performance of the 4 Kelvin Reference Load Unit

The LFI radiometers use a pseudo-correlation design where the signal from the sky is continuously compared with a stable reference signal, provided by a cryogenic reference load system. The reference unit is composed by small pyramidal horns, one for each radiometer, 22 in total, facing small absorbing targets, made of a commercial resin ECCOSORB CR (TM), cooled to approximately 4.5 K. Horns and targets are separated by a small gap to allow thermal decoupling. Target and horn design is optimized for each of the LFI bands, centered at 70, 44 and 30 GHz. Pyramidal horns are either machined inside the radiometer 20K module or connected via external electro-formed bended waveguides. The requirement of high stability of the reference signal imposed a careful design for the radiometric and thermal properties of the loads. Materials used for the manufacturing have been characterized for thermal, RF and mechanical properties. We describe in this paper the design and the performance of the reference system.Comment: This is an author-created, un-copyedited version of an article accepted for publication in JINST. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The definitive publisher authenticated version is available online at [10.1088/1748-0221/4/12/T12006]. 14 pages, 34 figure

The neutrophil to lymphocyte ratio (NLR) and the presence of large nodal mass are independent predictors of early response: A subanalysis of the prospective phase II PET-2-adapted HD0607 trial

Background: The neutrophil to lymphocyte ratio (NLR) and the lymphocyte to monocyte ratio (LMR) can reflect both the myeloid dysfunction and T-cell immune suppression and have prognostic significance. Methods: In 771 newly diagnosed advanced-stage Hodgkin Lymphoma (HL) patients we evaluated the baseline values of NLR and LMR as predictors of clinical outcome. According to the multicenter prospective phase II GITIL-HD0607 trial, all patients received two ABVD courses and if PET-2 negative received four additional ABVD cycles while if PET-2-positive patients were randomized to either BEACOPP escalated (Be) plus BEACOPP baseline (Bb) (4 + 4 courses) or Be + Bb (4 + 4) and Rituximab. PET scans were centrally reviewed by an expert panel by Blinded Independent Central Review. Results: Higher NLR and lower LMR were associated with a PET-2 positivity and failure to achieve long-term disease control, respectively. By univariate and multivariate analysis, large nodal mass (>7 cm), IPS ≥ 3, NLR > 6 were strong independent predictors of early PET-2 response after ABVD. Only NLR > 6 and IPS ≥ 3 were strong independent predictors of outcome at diagnosis; however, when PET-2 status was added, only PET-2-positive status and IPS ≥ 3 were independent predictors of PFS. Focusing on PET-2-negative patients, those with NLR > 6 had an inferior 3-year PFS compared to patients with NLR ≤ 6 (84% vs 89% months, P =.03). Conclusion: In advanced-stage HL patients treated with a PET-2-driven strategy, IPS ≥ 3 and NLR > 6 are independent predictors of outcome at diagnosis while the presence of large nodal mass, IPS ≥ 3, and NLR > 6 at diagnosis are independent predictors of early ABVD response

Further investigation of confirmed urinary tract infection (UTI) in children under five years: a systematic review.

Background: Further investigation of confirmed UTI in children aims to prevent renal scarring and future complications. Methods: We conducted a systematic review to determine the most effective approach to the further investigation of confirmed urinary tract infection (UTI) in children under five years of age. Results: 73 studies were included. Many studies had methodological limitations or were poorly reported. Effectiveness of further investigations: One study found that routine imaging did not lead to a reduction in recurrent UTIs or renal scarring. Diagnostic accuracy: The studies do not support the use of less invasive tests such as ultrasound as an alternative to renal scintigraphy, either to rule out infection of the upper urinary tract (LR- = 0.57, 95%CI: 0.47, 0.68) and thus to exclude patients from further investigation or to detect renal scarring (LR+ = 3.5, 95% CI: 2.5, 4.8). None of the tests investigated can accurately predict the development of renal scarring. The available evidence supports the consideration of contrast-enhanced ultrasound techniques for detecting vesico-ureteric reflux (VUR), as an alternative to micturating cystourethrography (MCUG) (LR+ = 14.1, 95% CI: 9.5, 20.8; LR- = 0.20, 95%CI: 0.13, 0.29); these techniques have the advantage of not requiring exposure to ionising radiation. Conclusion: There is no evidence to support the clinical effectiveness of routine investigation of children with confirmed UTI. Primary research on the effectiveness, in terms of improved patient outcome, of testing at all stages in the investigation of confirmed urinary tract infection is urgently required

Italian intersociety consensus statement on antithrombotic prophylaxis in hip and knee replacement and in femoral neck fracture surgery

Anticoagulant prophylaxis for preventing venous thromboembolism (VTE) is a worldwide established procedure in hip and knee replacement surgery, as well as in the treatment of femoral neck fractures (FNF). Different guidelines are available in the literature, with quite different recommendations. None of them is a multidisciplinary effort as the one presented. The Italian Society for Studies on Haemostasis and Thrombosis (SISET), the Italian Society of Orthopaedics and Traumatology (SIOT), the association of Orthopaedists and Traumatologists of Italian Hospitals (OTODI), together with the Italian Society of Anesthesia, Analgesia, Resuscitation, and Intensive Care (SIAARTI) have set down easy and quick suggestions for VTE prophylaxis in hip and knee surgery as well as in FNF treatment. This inter-society consensus statement aims at simplifying the grading system reported in the literature, and its goal is to benefit its clinical application. Special focus is given to fragile patients, those with high bleeding risk, and those receiving chronic antiplatelet (APT) and vitamin K antagonists treatment. A special chapter is dedicated to regional anaesthesia and VTE prophylaxis

How does study quality affect the results of a diagnostic meta-analysis?

Background: The use of systematic literature review to inform evidence based practice in diagnostics is rapidly expanding. Although the primary diagnostic literature is extensive, studies are often of low methodological quality or poorly reported. There has been no rigorously evaluated, evidence based tool to assess the methodological quality of diagnostic studies. The primary objective of this study was to determine the extent to which variations in the quality of primary studies impact the results of a diagnostic meta-analysis and whether this differs with diagnostic test type. A secondary objective was to contribute to the evaluation of QUADAS, an evidence-based tool for the assessment of quality in diagnostic accuracy studies. Methods: This study was conducted as part of large systematic review of tests used in the diagnosis and further investigation of urinary tract infection (UTI) in children. All studies included in this review were assessed using QUADAS, an evidence-based tool for the assessment of quality in systematic reviews of diagnostic accuracy studies. The impact of individual components of QUADAS on a summary measure of diagnostic accuracy was investigated using regression analysis. The review divided the diagnosis and further investigation of UTI into the following three clinical stages: diagnosis of UTI, localisation of infection, and further investigation of the UTI. Each stage used different types of diagnostic test, which were considered to involve different quality concerns. Results: Many of the studies included in our review were poorly reported. The proportion of QUADAS items fulfilled was similar for studies in different sections of the review. However, as might be expected, the individual items fulfilled differed between the three clinical stages. Regression analysis found that different items showed a strong association with test performance for the different tests evaluated. These differences were observed both within and between the three clinical stages assessed by the review. The results of regression analyses were also affected by whether or not a weighting (by sample size) was applied. Our analysis was severely limited by the completeness of reporting and the differences between the index tests evaluated and the reference standards used to confirm diagnoses in the primary studies. Few tests were evaluated by sufficient studies to allow meaningful use of meta-analytic pooling and investigation of heterogeneity. This meant that further analysis to investigate heterogeneity could only be undertaken using a subset of studies, and that the findings are open to various interpretations. Conclusion: Further work is needed to investigate the influence of methodological quality on the results of diagnostic meta-analyses. Large data sets of well-reported primary studies are needed to address this question. Without significant improvements in the completeness of reporting of primary studies, progress in this area will be limited

Time-Action Analysis (TAA) of the Surgical Technique Implanting the Collum Femoris Preserving (CFP) Hip Arthroplasty. TAASTIC trial Identifying pitfalls during the learning curve of surgeons participating in a subsequent randomized controlled trial (An observational study)

<p>Abstract</p> <p>Background</p> <p>Two types of methods are used to assess learning curves: outcome assessment and process assessment. Outcome measures are usually dichotomous rare events like complication rates and survival or require an extensive follow-up and are therefore often inadequate to monitor individual learning curves. Time-action analysis (TAA) is a tool to objectively determine the level of efficiency of individual steps of a surgical procedure.</p> <p>Methods/Design</p> <p>We are currently using TAA to determine the number of cases needed for surgeons to reach proficiency with a new innovative hip implant prior to initiating a multicentre RCT. By analysing the unedited video recordings of the first 20 procedures of each surgeon the number and duration of the actions needed for a surgeon to achieve his goal and the efficiency of these actions is measured. We constructed a taxonomy or list of actions which together describe the complete surgical procedure. In the taxonomy we categorised the procedure in 5 different Goal Oriented Phases (GOP):</p> <p>1. the incision phase</p> <p>2. the femoral phase</p> <p>3. the acetabulum phase</p> <p>4. the stem phase</p> <p>5. the closure pase</p> <p>Each GOP was subdivided in Goal Oriented Actions (GOA) and each GOA is subdivided in Separate Actions (SA) thereby defining all the necessary actions to complete the procedure. We grouped the SAs into GOAs since it would not be feasible to measure each SA. Using the video recordings, the duration of each GOA was recorded as well as the amount of delay. Delay consists of repetitions, waiting and additional actions. The nett GOA time is the total GOA time – delay and is a representation of the level of difficulty of each procedure. Efficiency is the percentage of nett GOA time during each procedure.</p> <p>Discussion</p> <p>This allows the construction of individual learning curves, assessment of the final skill level for each surgeon and comparison of different surgeons prior to participation in an RCT. We believe an objective and comparable assessment of skill level by process assessment can improve the value of a surgical RCT in situations where a learning curve is expected.</p