Liquid-Phase and Evanescent-Wave Cavity Ring-Down Spectroscopy in Analytical Chemistry

Due to its simplicity, versatility, and straightforward interpretation into absolute concentrations, molecular absorbance detection is widely used in liquidphase analytical chemistry. Because this method is inherently less sensitive than zero-background techniques such as fluorescence detection, alternative, more sensitive measurement principles are being explored. This review discusses one of these: cavity ring-down spectroscopy (CRDS). Advantages of this technique include its long measurement pathlength and its insensitivity to light-source-intensity fluctuations. CRDS is already a wellestablished technique in the gas phase, so we focus on two new modes: liquidphase CRDS and evanescent-wave (EW)-CRDS. Applications of liquidphase CRDS in analytical chemistry focus on improving the sensitivity of absorbance detection in liquid chromatography. Currently, EW-CRDS is still in early stages: It is used to study basic interactions between molecules and silica surfaces. However, in the future this method may be used to develop, for instance, biosensors with high specificity. Copyright © 2009 by Annual Reviews

Continuous wave optical parametric oscillator for quartz-enhanced photoacoustic trace gas sensing

A continuous wave optical parametric oscillator, generating up to 300 mW idler output in the 3–4 μm wavelength region, and pumped by a fiber-amplified DBR diode laser is used for trace gas detection by means of quartz-enhanced photoacoustic spectroscopy (QEPAS). Mode-hop-free tuning of the OPO output over 5.2 cm-1 and continuous spectral coverage exceeding 16.5 cm-1 were achieved via electronic pump source tuning alone. Online monitoring of the idler wavelength, with feedback to the DBR diode laser, provided an automated closed-loop control allowing arbitrary idler wavelength selection within the pump tuning range and locking of the idler wavelength with a stability of 1.7×10-3 cm-1 over at least 30 min.\ud \ud Using this approach, we locked the idler wavelength at an ethane absorption peak and obtained QEPAS data to verify the linear response of the QEPAS signal at different ethane concentrations (100 ppbv-20 ppmv) and different power levels. The detection limit for ethane was determined to be 13 ppbv (20 s averaging), corresponding to a normalized noise equivalent absorption coefficient of 4.4×10-7 cm-1  W/Hz1/2

Laser spectroscopy for breath analysis : towards clinical implementation

Detection and analysis of volatile compounds in exhaled breath represents an attractive tool for monitoring the metabolic status of a patient and disease diagnosis, since it is non-invasive and fast. Numerous studies have already demonstrated the benefit of breath analysis in clinical settings/applications and encouraged multidisciplinary research to reveal new insights regarding the origins, pathways, and pathophysiological roles of breath components. Many breath analysis methods are currently available to help explore these directions, ranging from mass spectrometry to laser-based spectroscopy and sensor arrays. This review presents an update of the current status of optical methods, using near and mid-infrared sources, for clinical breath gas analysis over the last decade and describes recent technological developments and their applications. The review includes: tunable diode laser absorption spectroscopy, cavity ring-down spectroscopy, integrated cavity output spectroscopy, cavity-enhanced absorption spectroscopy, photoacoustic spectroscopy, quartz-enhanced photoacoustic spectroscopy, and optical frequency comb spectroscopy. A SWOT analysis (strengths, weaknesses, opportunities, and threats) is presented that describes the laser-based techniques within the clinical framework of breath research and their appealing features for clinical use.Peer reviewe

Modelling glucose and water dynamics in human skin

Background: Glucose is heterogeneously distributed in the different physiological compartments in the human skin. Therefore, for the development of a noninvasive measurement method, both a good quantification of the different compartments of human skin and an understanding of glucose transport processes are important. Methods: The composition of human skin was quantified by histology research. Based on this information a mathematical model was developed to simulate glucose dynamics in human skin. Results: The model predicts dynamically glucose concentrations in the different layers of the skin as a result of changes in blood glucose concentration. The model was validated with published time course data of blood and interstitial fluid glucose during a clamp study with three different set points for blood glucose, and model outcomes were compared to measurements for the lag time and gradient. According to the model, glucose in the interstitial fluid of the dermis best matches the amplitude and dynamics of blood glucose. Conclusions: The new data obtained from quantitative histology appeared crucial for the model. The proposed model was successfully validated. This result was obtained without tuning or fitting of any parameter. It was shown how the model can be used to set standards for measurements and to define the best measurement depth for noninvasive glucose monitoring

Modelling glucose and water dynamics in human skin

Background: Glucose is heterogeneously distributed in the different physiological compartments in the human skin. Therefore, for the development of a noninvasive measurement method, both a good quantification of the different compartments of human skin and an understanding of glucose transport processes are important. Methods: The composition of human skin was quantified by histology research. Based on this information a mathematical model was developed to simulate glucose dynamics in human skin. Results: The model predicts dynamically glucose concentrations in the different layers of the skin as a result of changes in blood glucose concentration. The model was validated with published time course data of blood and interstitial fluid glucose during a clamp study with three different set points for blood glucose, and model outcomes were compared to measurements for the lag time and gradient. According to the model, glucose in the interstitial fluid of the dermis best matches the amplitude and dynamics of blood glucose. Conclusions: The new data obtained from quantitative histology appeared crucial for the model. The proposed model was successfully validated. This result was obtained without tuning or fitting of any parameter. It was shown how the model can be used to set standards for measurements and to define the best measurement depth for noninvasive glucose monitoring

Automatically tunable continuous-wave optical parametric oscillator for high-resolution spectroscopy and sensitive trace-gas detection

Contains fulltext : 36062pub.pdf (publisher's version ) (Closed access)We present a high-power (2.75 W), broadly tunable (2.75-3.83 mu m) continuous-wave optical parametric oscillator based on MgO-doped periodically poled lithium niobate. Automated tuning of the pump laser, etalon and crystal temperature results in a continuous wavelength coverage up to 450 cm(-1) per poling period at < 5x10(-4) cm(-1)upercript stop resolution. The versatility of the optical parametric oscillator as a coherent light source in trace-gas detection is demonstrated with photoacoustic and cavity ring-down spectroscopy. A 17-cm(-1)-wide CO2 spectrum at 2.8 mu m and multi-component gas mixtures of methane, ethane and water in human breath were measured using photoacoustics. Methane (at 3.2 mu m) and ethane (at 3.3 mu m) were detected using cavity ring-down spectroscopy with detection limits of 0.16 and 0.07 parts per billion by volume, respectively. A recording of (CH4)-C-12 and (CH4)-C-13 isotopes of methane shows the ability to detect both species simultaneously at similar sensitivities

Application of laser spectroscopy for measurement of exhaled ethane in patients with lung cancer.

There is increasing interest in ethane (CA) in exhaled breath as a noninvasive marker of oxidative stress (OS) and thereby a potential indicator of disease. However, the lack of real-time measurement techniques has limited progress in the field. Here we report on a novel Tunable Diode Laser Spectrometer (TDLS) applied to the analysis of exhaled ethane in patients with lung cancer. The patient group (n = 52) comprised randomly selected patients presenting at a respiratory clinic. Of these, a sub-group (n = 12) was subsequently diagnosed with lung cancer. An age-matched group (n = 12) corresponding to the lung cancer group was taken from a larger control group of healthy adults (n = 58). The concentration of ethane in a single exhaled breath sample collected from all subjects was later measured using the TDLS. This technique is capable of real-time analysis of samples with accuracy 0.1 parts per billion (ppb), over 10 times less than typical ambient levels in the northern hemisphere. After correcting for ambient background, ethane in the control group (26% smokers) ranged from 0 to 10.54 ppb (median of 1.9 ppb) while ethane in the lung cancer patients (42% smokers) ranged from 0 to 7.6 ppb (median of 0.7 ppb). Ethane among the non-lung cancer patients presenting for investigation of respiratory disease ranged from 0 to 25 ppb (median 1.45 ppb). We conclude that, white the TDLS proved effective for accurate and rapid sample analysis, there was no significant difference in exhaled ethane among any of the subject groups. Comments are made on the suitability of the technique for monitoring applications. (c) 2005 Elsevier Ltd. All rights reserved

Quantitative gas measurements using a versatile opo-based cavity ringdown spectrometer and the comparison with spectroscopic databases

Item does not contain fulltext8 p