Accretion Disk Temperatures of QSOs: Constraints from the Emission Lines

QSO emission-line spectra are compared to predictions based on theoretical ionizing continua of accretion disks. Observed line intensities do not show the expected trend of higher ionization with higher accretion disk temperature as derived from the black hole mass and accretion rate. This suggests that, at least for accretion rates close to the Eddington limit, the inner disk does not reach temperatures as high as expected from standard disk theory. Modified radial temperature profiles, taking account of winds or advection in the inner disk, achieve better agreement with observation. This conclusion agrees with an earlier study of QSO continuum colors as a function of disk temperature. The emission lines of radio-detected and radio-undetected sources show different trends as a function of disk temperature.Comment: 9 pages, 8 figures, submitted to Ap

Internally coated air-cooled gas turbine blading

Ten candidate modified nickel-aluminide coatings were developed using the slip pack process. These coatings contain additives such as silicon, chromium and columbium in a nickel-aluminum coating matrix with directionally solidified MAR-M200 + Hf as the substrate alloy. Following a series of screening tests which included strain tolerance, dynamic oxidation and hot corrosion testing, the Ni-19A1-1Cb (nominal composition) coating was selected for application to the internal passages of four first-stage turbine blades. Process development results indicate that a dry pack process is suitable for internal coating application resulting in 18 percent or less reduction in air flow. Coating uniformity, based on coated air-cooled blades, was within + or - 20 percent. Test results show that the presence of additives (silicon, chromium or columbium) appeared to improve significantly the ductility of the NiA1 matrix. However, the environmental resistance of these modified nickel-aluminides were generally inferior to the simple aluminides

Characterizing HV XLPE cables by electrical, chemical and microstructural measurements on cable peeling: Effects of surface roughness, thermal treatment and peeling location

Characterization of the electrical, chemical, and microstructural properties of high voltage cables was the first step of the European project “ARTEMIS”, which has the aim of investigating degradation processes and constructing aging models for the diagnosis of cross-linked polyethylene (XLPE) cables. Cables produced by two different manufacturers were subjected to a large number of electrical, microstructural, and chemical characterizations, using cable peelings, instead of lengths of whole cables, as specimens for the measurements. Here the effect of surface deformation and roughness due to peeling and the relevance and significance of thermal pre-treatment prior to electrical and other measurements is discussed. Special emphasis is put on space charge, conduction current and luminescence measurements. We also consider the dependence of these properties on the spatial position of the specimen within the cable. It is shown that even though the two faces of the cable peel specimens have different roughness, the low-field electrical properties seem quite insensitive to surface roughness, while significant differences are detectable at high fields. Thermal pre-treatment is required to stabilize the insulating material to enable us to obtain reproducible results and reliable inter-comparisons throughout the whole project. The spatial position of the specimens along the cable radius can also have a non-negligible influence on the measured properties, due to differential microstructure and chemical composition

Spitzer/MIPS Limits on Asteroidal Dust in the Pulsar Planetary System PSR B1257+1

With the MIPS camera on Spitzer, we have searched for far-infrared emission from dust in the planetary system orbiting pulsar PSR 1257+12. With accuracies of 0.05 mJy at 24 um and 1.5 mJy at 70 um, photometric measurements find no evidence for emission at these wavelengths. These observations place new upper limits on the luminosity of dust with temperatures between 20 and 1000 K. They are particularly sensitive to dust temperatures of 100-200 K, for which they limit the dust luminosity to below $3 \times 10^{-5}$ of the pulsar's spin-down luminosity, three orders of magnitude better than previous limits. Despite these improved constraints on dust emission, an asteroid belt similar to the Solar System's cannot be ruled out

Absolute Calibration of the Radio Astronomy Flux Density Scale at 22 to 43 GHz Using Planck

The Planck mission detected thousands of extragalactic radio sources at frequencies from 28 to 857 GHz. Planck's calibration is absolute (in the sense that it is based on the satellite's annual motion around the Sun and the temperature of the cosmic microwave background), and its beams are well characterized at sub-percent levels. Thus Planck's flux density measurements of compact sources are absolute in the same sense. We have made coordinated VLA and ATCA observations of 65 strong, unresolved Planck sources in order to transfer Planck's calibration to ground-based instruments at 22, 28, and 43 GHz. The results are compared to microwave flux density scales currently based on planetary observations. Despite the scatter introduced by the variability of many of the sources, the flux density scales are determined to 1-2% accuracy. At 28 GHz, the flux density scale used by the VLA runs 3.6% +- 1.0% below Planck values; at 43 GHz, the discrepancy increases to 6.2% +- 1.4% for both ATCA and the VLA.Comment: 16 pages, 4 figures and 4 table