59,132 research outputs found
Short and slim nacelle design for ultra-high BPR engines
An optimisation method consisting of the non-dominated sorting genetic algorithm (NSGA-II) and computational fluid dynamics of aero-engine nacelles is outlined. The method is applied to three nacelle lengths to determine the relative performance of different ultra-high bypass ratio engine nacelles. The optimal designs at each nacelle length are optimised for three objective functions: cruise drag, drag rise Mach number and change in spillage drag from mid to end of cruise. The Pareto sets generated from these optimisation computations demonstrate that the design space for short nacelles is much narrower in terms of these performace metrics and there are significant penalties in the off design conditions compared to the longer nacelle. Specifically the minimum spillage drag coefficient attainable, for a nacelle with a drag rise Mach number above 0.87, was 0.0040 for the shortest nacelle compared to 0.0005 for a nacelle which was 23% longer
Recommended from our members
A survey of nearby galaxies for CO
We have made a survey of the nuclei of 81 galaxies for the 1-) line of CO. 38 of the galaxies are from a complete sample with recession velocity ≦400 km s-1 and 21-cm line strength ≧10-27 Wm-2, and the remainder represent nearby galaxies with weaker or no HI, early-type galaxies (E/SO/Sa) with detected HI and active/infrared galaxies.
Galaxies with strong CO lines like M82, NGC253 and IC342 are exceedingly rare: all the galaxies we observed are weaker than 0/2K except the irregular galaxy DDO133 with T*A=0.22K. We have new, confirmed detections of two other irregular galaxies, IC10 and Pegasus, at a weaker level, and unconfirmed detections of the irregular NGC3109 and the nearest Type I Seyfert galaxy NGC4051. We have confirmed the existence of CO in the nucleus of NGC6946 and obtained spectra of new positions in M82 and NGC253
An optimization method for nacelle design
A multi-objective optimiZation method is demonstrated using an evolutionary genetic algorithm. The applicability of this method to preliminary nacelle design is demonstrated by coupling it with a response surface model of a wide range of nacelle designs. These designs were modelled using computational fluid dynamics and a Kriging interpolation was carried out on the results. The NSGA-II algorithm was tested and verified on established multi-dimensional problems. Optimisation on the nacelle model provided 3-dimensional Pareto surfaces of optimal designs at both cruise and off-design conditions. In setting up this methodology several adaptations to the basic NSGA-II algorithm were tested including constraint handling, weighted objective functions and initial sample size. The influence of these operators is demonstrated in terms of the hyper volume of the determined Pareto set
Choked flow analogy for very low quality two-phase flows Technical report no. 18
Choked flow analogy for very low quality two-phase flows - homogeneous flow and hydraulic jump theoretical models for predicting axial pressure distributio
Cavitation damage characteristics in water and mercury from studies in a cavitating Venturi Technical report no. 17
Cavitating damage characteristics in water and mercury studied in cavitating Ventur
Reflection high-energy electron diffraction patterns of CrSi_2 films on (111) silicon
Highly oriented films of the semiconducting transition metal silicide, CrSi2, were grown on (111) silicon substrates, with the matching crystallographic faces being CrSi_2(001)/Si(111). Reflection high‐energy electron diffraction (RHEED) yielded symmetric patterns of sharp streaks. The expected streak spacings for different incident RHEED beam directions were calculated from the reciprocal net of the CrSi_2(001) face and shown to match the observed spacings. The predominant azimuthal orientation of the films was thus determined to be CrSi_2〈210〉∥Si〈110〉. This highly desirable heteroepitaxial relationship may be described with a common unit mesh of 51 Å^2 and a mismatch of −0.3%. RHEED also revealed the presence of limited film regions of a competing azimuthal orientation, CrSi_2〈110〉∥Si〈110〉. A new common unit mesh for this competing orientation is suggested; it possesses an area of 612 Å^2 and a mismatch of −1.2%
Recommended from our members
A multimedia tutorial shell with qualitative assessment in biology
The project is developing methods to produce multimedia tutorials relatively quickly and cheaply, using a generic software shell suitable for any subject area. The shell is a version of one produced originally as part of the HEFC-funded TLTP initiative by the Biodiversity Consortium. Tutorials presented in the shell will provide the student with a structured learning experience that will allow their initial knowledge level or their knowledge acquisition and progress to be qualitatively and quantitatively assessed. Where areas of weakness are revealed by the assessment, students will be advised to study particular parts of the tutorial in order to improve their understanding
Gas Content, Size, Temperature and Velocity Effects on Cavitation Inception Internal Report No. 31
Gas content, size temperature, and velocity effects on Venturi cavity inceptio
- …